The detailed use of the wall hung boiler and how to operate it

1. First of all, the newly installed wall-hung boiler is filled with water first, and the water filling method is to open the exhaust valve first.

2. Then open the water replenishment valve of the wall-hung boiler for water replenishment.

3. The wall-hung boiler is equipped with a leakage protection plug, which can be connected to the power supply according to the key switch in the middle.

4. This is the first time to let the wall-hung boiler run by itself for 5 minutes, and when the air in the system is almost exhausted, turn on the natural gas for ignition.

1. First of all, the newly installed wall-hung furnace is filled with water first, and the method of filling water is to open the exhaust valve first.

2. Then open the water replenishment valve of the wall-hung boiler to replenish the water.

3. Then the wall-hung boiler is equipped with a leakage protection plug, and the power supply can be turned on according to the key switch in the middle.

4. Use the wall-hung boiler for the first time and let the wall-hung boiler run by itself for 5 minutes, and then turn on the natural gas to ignite when the air in the system is almost exhausted.

1. Before use, the user should first check whether the water pressure gauge pointer of the wall-hung boiler is within the specified range, and the standard water pressure specified in the manual is Pa, but in the actual use process, due to the presence of some air in the heating system and the boiler, when the boiler is running, the air in the system is continuously discharged from the exhaust valve in the boiler, and the pressure of the boiler will drop irregularly; During winter heating, it is normal for the water in the heating system to expand when heated, and the water pressure in the system will rise, and then drop when the water cools. Experiments show that as long as the water pressure in the wall-hung boiler is kept in between, it will not affect the normal use of the wall-hung boiler at all. If the water pressure is lower, it may cause the domestic hot water to be hot and cold or unable to start normally, if the water pressure is higher than the bar, the system pressure rises during heating, if it exceeds 3 bar, the safety valve of the boiler will automatically drain the water, which may cause unnecessary losses, under normal circumstances, it can be replenished once in about one to two months.

2. Special reminder: After the system is replenished, the water supply switch of the wall-hung boiler must be turned off, and the owners who are on a long-term business trip should close the main valve of the water supply. It is recommended to install a drain pipe on the safety valve of the wall-hung boiler to avoid unnecessary losses when the water pressure of the wall-hung boiler is too high.

About the display of wall-hung boiler (E2), the display of each manufacturer's production equipment is different;

3. When the wall-hung boiler is started, if the flame cannot be detected, it will automatically enter the protection state, and the E2 fault indication of the wall-hung boiler will be displayed one by one. The reason for this is that there has been an outage in the gas connection to it. At this point, the gas system should be checked for possible faults:

1. Whether the natural gas is unblocked, whether there is a gas outage 2, the gas meter battery has no electricity 3, the balance in the gas meter is less than 4, the gas valve is not opened 5, the gas meter is faulty, etc. (the above phenomena can be verified by the gas stove for cooking, find the cause and solve it) 6. Gas alarm device (there is a round cap on the solenoid valve under normal circumstances, if the opposite is the closed state, if there is such a situation, it is necessary to check whether there is a gas leakage at home, and the most professional who does not understand it is called a professional to come to the door for maintenance, There are also gas alarm devices that make wrong judgments). 7. Check the water supply and power supply system and troubleshoot; At this time, if you want to start the wall-hung boiler, you must manually reset the wall-hung boiler until the E2 display is extinguished.

1. When using hot water, it is not advisable to copy it at once.

Turn the water to the maximum, which will cause a lot of cold water to be wasted; You should adjust to a small water flow, and then adjust the water flow according to the water temperature you need after the wall-hung boiler works. This saves water and warms up the water in a short period of time.

2. Don't turn on and off the faucet many times in the process of bathing, because every time you switch it, the wall-hung boiler will be restarted once, and a lot of cold water will be wasted in the process. Such incorrect operation also increases the consumption of natural gas and also shortens the service life of the wall-hung boiler.

3. The heating pipe valve can be closed in the room where no one lives, so that the temperature of the room being heated can rise quickly and reduce natural gas consumption.

4. The chimney of the wall-hung boiler must be vented smoothly, and the chimney should be high inside and low outside, and the chimney should be stretched out of the window, so that the smoke pipe can inhale fresh air and discharge the combustion exhaust gas.

5. The wall-hung boiler should be installed in the kitchen, and must be operated and used according to the manual process, and individuals cannot disassemble or open it without permission. If there is a failure, you should call the after-sales service or contact the maintenance personnel in time, and other professional maintenance personnel will come to check and repair, and do not disassemble it privately to prevent it.

brands differ in their operation.

The complex method is also based.

The production is not the same, taking the Erica wall-hung boiler as an example, the operation is very simple, you don't even say the brand, you can't get it in a few words here, so check the most authoritative manual, the general manual should be randomly brought with a copy, at least Erica's high-end goods are like this; If you really can't find the manual, you can call the brand manufacturer after-sales service.

Look at the instructions for the use of the wall-hung boiler that has been installed in your home, and ask the technician who installed the boiler in your home to teach you.

Go to the official website of [Ruineng Wall-hung Boiler] and there are relevant instructions for the use of wall-hung boilers!!

Your mother asked him to call me every day, and the person who explained it was sure to come and see it.

1. The newly installed wall-hung boiler is filled with water first, and the water injection method is to open the exhaust valve first.

2. Then open the water replenishment valve of the wall-hung boiler for water replenishment.

3. The wall-hung boiler is used to protect the leakage and protect the Lu Bu Lu plug in the morning, and the power supply can be turned on by pressing the switch key in the middle.

4. Use the wall-hung boiler for the first time to run on its own for 5 minutes, and then turn on the natural gas ignition when the air on the surface of the system is almost exhausted.

1. Before using it in winter, check whether the water pressure gauge pointer is between 1-. If it is lower than 1, the water supply return valve must be opened to replenish water, and the water supply valve should be closed after the pressure is reached. The water pressure should not be higher than the water replenishment valve located in the middle of the bottom of the wall-hung furnace, which is a black knob, open to the left and close to the right).

2. Heating: If the water pressure is in the above range, open the gas pipe valve, turn on the power, set the machine in the winter position, set the heating temperature, usually the upper limit temperature of floor heating can be set to 55-60 degrees Celsius, and the maximum temperature of radiator heating can be set to 75-85 degrees Celsius. Leave it alone after normal ignition.

3. Bathing: After the pressure of the water pressure gauge is normal, open the gas pipe valve, turn on the power, set the machine in the summer position (if it is winter, that is, set it in the winter position), set the hot water temperature between 42-45 degrees Celsius, turn on the hot water head, and start bathing after the water temperature is suitable and stable.

4. Anti-freezing: the pressure of the water pressure gauge is normal, plug in the power supply of the machine (do not need to turn it on), and open the gas channel (must ensure that there is a gas source).

1.Before use, check that the smoke pipe, water and electricity valves are correct to ensure that they can be used normally.

2.Check the water pressure gauge to make sure the water pressure is within the normal range.

3.Turn on the wall-hung boiler, set the winter heating mode, and adjust the temperature according to the perceived temperature.

4.Don't switch on and off frequently.

5.It needs to be cleaned and maintained regularly to prolong the service life.

In the cold winter, the heating problem has always been a concern for people, and installing a wall-hung boiler is a very good choice for many families, because it does not have to consider the problem of central heating. After installation, you only need to turn on the wall-hung boiler, and you can enter the "heating mode" in advance, and the heating effect of the wall-hung boiler is very good. But many people don't know how to use it after installing the wall-hung boiler, so that it has become an idle product, so today we will talk about its operation method, let's take a look!

1.Before use, the wall-hung boiler should be carefully checked, including smoke pipes, water and electricity valves, so as to ensure that the wall-hung boiler has no water leakage, air leakage, electricity leakage and other phenomena, and can be used normally, with normal suction and exhaust.

2.In addition, it is also necessary to check the water pressure gauge of the wall-hung boiler, the water pressure gauge should be when the cold engine is stopped, if the water pressure is low, the water must be replenished through the water supply valve, and the water pressure is high through the exhaust valve drainage to reduce the pressure.

3.Turn on the wall-hung boiler, adjust to the winter heating mode, it is recommended to set the indoor temperature at 18 -22, of course, the actual need to adjust according to the body temperature.

4.When the wall-hung boiler is energized to work, do not switch on and off frequently, if the short-term (no more than three days) out does not need to be turned off, as long as its temperature is adjusted to the lowest, if it is more than three days, then it can be turned off, but do not need to cut off the power.

5.After a long time of use, the wall-hung boiler needs to be cleaned and maintained regularly, because scale will form inside it, and not cleaning it will increase the gas consumption of the wall-hung boiler, so in order to save gas and prolong the service life, it is best to maintain it regularly.

For the maintenance of wall-hung boilers, if you can contact the manufacturer's after-sales service during the warranty period, if you exceed the warranty period, you can also contact the manufacturer directly, but it will incur costs and is more expensive. In addition, you can also contact some specialized home appliance repair shops online, because there are platform specifications, so it is relatively reliable.

Hello, I am happy to serve you and give you the following answers: 1. Operation method: (1) Turn on the power switch, press the switch of the wall-hung boiler, and the wall-hung boiler will start working; (2) Press the temperature adjustment button on the wall-hung furnace to adjust the temperature; (3) Press the air volume adjustment button on the wall-hung boiler to adjust the air volume in the beam state; (4) Press the timing switch on the wall-hung boiler to set the timing time; (5) Press the mode button on the wall-hung boiler to select the mode; (6) Press the switch on the wall-hung boiler to turn it off.

2. Causes and solutions to the problem: (1) The wall-hung boiler cannot work normally: it may be that the power switch is not opened, or the switch of the wall-hung boiler is not pressed, or the power cord is not connected, you can check whether the power switch, the switch of the wall-hung boiler, and the power cord are connected.

2) The temperature of the wall-hung boiler cannot be adjusted: it may be that the temperature adjustment button is not pressed, or the temperature adjustment button is not adjusted to the correct temperature, you can check whether the temperature adjustment button is pressed, if not, you can press the temperature adjustment button, and then adjust to the correct temperature. (3) The air volume of the wall-hung boiler cannot be adjusted

It may be that the air volume adjustment button is not pressed, or the air volume adjustment button is not adjusted to the air volume of the correct oak source, you can check whether the air volume adjustment button is pressed, if not, you can press the air volume adjustment button, and then adjust to the correct air volume. 3. Personal tips: When using the wall-hung boiler, pay attention to the operation steps, operate in the correct order, and pay attention to check whether the power switch, the switch of the wall-hung boiler, and the power cord are connected, and whether the temperature adjustment button and air volume adjustment button are pressed to avoid failure.