Where is the gas stove leakage protection device

The gas stove leakage protection device is at the valve and is a small box, but don't underestimate it, because it plays a great role in protecting the gas equipment in the home. The protection device of the gas stove is required to be installed in every household that uses gas, and when the indoor gas pipeline finds a leak, the protection device will sound the alarm and automatically close the gas valve. This plays a big security role.

The gas protection device needs the installer to connect it to the gas pipeline and plug it in before it can work.

In the ignition stove shaped ring ignition on the side. Its function is that in an emergency, once the fire is extinguished, its activation can automatically cut off the gas to reduce the occurrence of accidents.

It should be the place to switch the interface. After a long time, it will leak air when it ages. Then we must protect the gas stove. Everyone is responsible.

Summary. The automatic flame-out protection device means that when the flame of the gas is accidentally extinguished, the device automatically cuts off the gas to prevent the occurrence of gas leakage. The flame-out protection device consists of a thermocouple and a solenoid valve.

Just like our nervous system, thermocouples are receptors, which receive heat in the form of electric potential, transmit information to the "brain" solenoid valve, control the gas valve air inlet hole to open, and ensure the normal combustion of the gas stove. When the flame is unexpectedly extinguished, the electric potential generated by the thermocouple disappears, and the solenoid valve resets under the action of its own spring, blocking the gas valve inlet hole.

The automatic flame-out protection device is to dig when the flame of the gas is accidentally extinguished, and the device automatically cuts off the gas to prevent the occurrence of gas leakage. The flame-out protection device consists of a thermocouple and a solenoid valve. Just like our nervous system, thermocouples are receptors, which receive heat in the form of electric potential, transmit information to the "brain" solenoid valve, control the gas valve air inlet hole to open, and ensure the normal combustion of the gas stove.

When the flame is accidentally extinguished, the electric potential generated by the thermocouple disappears, and the solenoid valve will reset under the action of its own spring, and the air inlet hole of the gas valve will be blocked.

What is the situation that this kind of stove will automatically turn off after about ten seconds?

Generally, the feedback needle is damaged, whether you are new or have been used for a long time.

It's been a month.

There will be no dirt and blockage for a few months, and it is an automatic flame-out protection feedback pin line that is not connected or the probe is faulty.

Now it is still in the after-sales free warranty period, and it is recommended that the merchant can replace it for free.

Method: 1. Please configure an appropriate amount of soapy water (preferably thicker) for leak detection. 2. Open the ventilation valve to make the air source unblocked.

3. Check whether there is air leakage at the connection of the pressure reducing valve (only applicable to liquefied gas): dip a small amount of soapy water, drop it on the connection between the pressure reducing valve and the liquefied gas tank, and manage the gas user to check the connection between the plug valve and the hose and the hose and the stove, and observe whether there are bubbles. 4. Check whether there is air leakage at the interface connecting the hose

Same as the above detection method experiment. 5. If the above methods still cannot remove the air leakage, professional maintenance personnel are required to come to the door for maintenance. How to use and maintain the gas stove:

1. According to national regulations, the service life of general household stoves is 8 years, and users should scrap them in time after expiration to avoid hidden dangers. 2. Always check whether the interface of the gas supply pipeline is leaking, whether the rubber hose is in good condition, whether there are cracks in aging, and once found, it should be replaced in time. The steps are as follows:

1) Please configure an appropriate amount of soapy water for leak detection. 2. Open the ventilation valve to make the air source unblocked. (3) Check whether there is air leakage at the connection of the pressure reducing valve (only applicable to liquefied gas):

Dip a small amount of soapy water and drop it on the pressure reducing valve at the beginning of the connection between the liquefied gas tank to observe whether there are air bubbles. (4) Check whether there is air leakage at the interface of the connecting hose: the same as the above detection method experiment.

A leak from a burner-pure gas stove is a very dangerous situation that can cause a fire or** if not treated in time. Therefore, when you find that the gas stove is leaking, it is essential to repair it in time. The following is the method of repairing the gas leak of the gas stove:

1. Cut off the gas source: The first step is to cut off the gas source and close the gas valve to avoid gas outflow.

2. Check the gas pipeline: check whether the gas pipeline is damaged or aging, and replace it in time if necessary. At the same time, check whether the gas pipeline is firmly connected, if the mouth screw is loose, tighten it.

3. Check the valve: check whether the gas valve is working normally, and replace it in time if any abnormal situation is found.

4. Check the gas tank: If you are using a gas tank, you need to confirm whether the tank is intact and whether there is any air leakage. At the same time, check whether the gas leakage protection device is normal, and contact professionals in time if there is any problem.

5. Use leak detector: If you are not sure about the location of the air leakage, you can use the leak detector to detect it. First of all, open the gas valve, apply the leak detector to the gas pipeline connection, gas switch and gas storage tank connection, if there are bubbles, then it means that there is a gas leak.

6. Fix the problem: determine the problem according to the inspection results, if the gas pipeline is aging, it needs to be replaced; If there is a problem with the gas valve, it needs to be replaced; If there is a problem with the air leak protection device, you need to contact a professional to solve it.

In conclusion, a gas stove leak is a very dangerous situation that must be dealt with in a timely manner once it is found. At the same time, in order to prevent this kind of thing from happening, it is also necessary to regularly inspect gas pipelines, valves, tanks, etc., to ensure the safety of use.

1. Dip a small amount of soapy water into the gas stove leakage, drop it on the pressure reducing valve and the liquefied gas tank at the beginning of the connection, observe whether there are bubbles, if there are bubbles, you need to consult the user to replace the pressure reducing valve.

2. If you find that the gas leakage is serious, you should contact professional personnel in time to repair the door, during the waiting period, the rotten wax should immediately open the doors and windows, and check whether the gas stove switch is turned off, if it is not closed, it should be closed in time.

3. Before the maintenance personnel arrive, the user must not stay indoors, and strictly prohibit the fire from entering, and do not turn on or off the lights, so as to avoid poisoning, ** and other accidents.

1. Dip a small amount of soapy water in the gas stove macro leakage, drop it on the pressure reducing valve and liquefied gas tank at the beginning of the connection, observe whether there are bubbles, if there are bubbles, you need to consult the user to replace the pressure reducing valve.

2. If you find that the gas leakage is serious, you should contact professional personnel in time to come to the door for maintenance, during the waiting period, you should immediately open the doors and windows, and check whether the gas stove switch is closed, if it is not closed, it should be closed in time.

3. Before the maintenance personnel arrive to return to the mountain, users should not stay indoors, and strictly prohibit the fire from entering, and do not turn on or off the lights, so as to avoid poisoning, ** and other accidents.

When the gas stove leaks, it is necessary to find the cause of the air leakage, usually the gas valve switch inside the gas stove inner shaft valve core and the valve body are not tightly matched, the valve core and the valve body are matched in the opposite direction after maintenance, and the rubber ring of the joint hose is not tight, or it may be that the hose used is not tightly connected with the switch in front of the stove and the stove joint.

Solving Tips:1If you are using liquefied gas at home, you can check the connection of the pressure reducing valve for air leakage by yourself, and replace the pressure reducing valve if it is leaking.

2.If the air leakage is severe, it is difficult to solve it by yourself. Doors and windows should be opened immediately, and the gas stove switch should be turned off, if not, it should be turned off in time. Try not to stay indoors as much as possible, and fire is strictly prohibited.

If the gas stove leaks, measures should be taken immediately

1.Close the gas valve: The first thing to do is to close the gas valve to prevent the gas from leaking further.

2.Open windows and doors: Open windows and doors to allow air to circulate in the room so that the gas can be vented.

3.Do not use open flames: Do not use open flames or electrical appliances to avoid disasters.

5.Do not repair or disassemble gas pipes or gas cooktops by yourself, as this may cause greater danger of key closure.

In short, gas stove leakage is a very dangerous thing, and measures must be taken in time to ensure personal safety.