What should I do if the Xinfei gas stove at home suddenly fails to ignite?

Xinfei gas stove can't catch fire causes and solutions.

1. If there is no gas, if the gas stove does not catch fire, the first thing to check is whether there is still gas, and if not, you must add gas.

2. Whether the battery has electricity or not, when you find that the ignition is not on fire, you should check whether the battery has electricity, if not, you only need to replace the ordinary No. 1 battery.

3. Poor circuit contact, mainly to check whether there is rust on the positive and negative poles of the battery box, whether the line has poor contact, if there is, the rust needs to be removed, and the line is accurately connected.

4. Overpressure protection, many gas stoves have overpressure protection function, once the overpressure will not start, then it is necessary to change a pressure reducing valve.

Give it a try. 5. Pipeline blockage, once the pipeline is blocked, it is necessary to check the gas outlet valve, generally speaking, you can smell the smell of coal and the gas stove is not on fire, it is likely to be gas blockage, and then the pipeline needs to be dredged.

6. Micro switch.

Damaged, a small place in the gas stove when the micro switch, but it is more difficult to repair than the usual fault, generally speaking, it is not recommended that the owner repair it himself, this is a fine, professional work, it is best to ask a professional person to solve.

7. The ignition needle is dirty, the kitchen is easy to be dirty, especially easy to be contaminated with oil, etc., the gas stove is placed for too long, and the ignition needle is easy to be stained by oil, so you need to clean the oil scale of the ignition needle, and then try to ignite.

8. The ignition needle is not in proper position, if you want to ignite the fire, the gas stove has certain requirements for the distance between the ignition needle and the fire cover, once the distance deviates too much, it will cause the gas stove to not catch fire, generally speaking, the distance between the ignition needle and the fire cover is 4-6mm, and it should be aimed at the fire hole.

9. The gas stove has a high-voltage line.

Compared with the joint, once the high-voltage line is aging, it is easy to make a gas stove and not catch fire, at this time, it is only necessary to add a set of high-voltage protection, which should be observed more in ordinary life.

The gas stove at home suddenly can't catch fire, check the battery, it should be that the battery is out of power, and the battery can be replaced.

First of all, you check to see that the valves of the gas stove are all open, and secondly, it is possible that the switch battery of the gas stove is out of power. It is also possible that the tuyere is blocked.

How do I change the battery? What size battery is it? Please advise!

1. When ignition, see if there will be sparks coming out, if there is no spark, the battery will not ignite due to no electricity, and you can replace the battery with a new one. 2. It is also possible that the ignition needle of the Xinfei gas stove is blocked by dirty things, just clean up the dirt on the ignition needle. Other Failure Causes:

Suggested solutions: 1. If the spark can be played when the ignition is ignited, but the spark is very weak, it means that the battery is dead, and the battery can be replaced. 2. If the ignition needle of the Xinfei gas stove is very dirty, you can use a dry towel or cotton swab to wipe it.

3. If the above check shows that the battery is not faulty, or the ignition hydrant is blocked, then it is likely that the nozzle is blocked, at this time we will take out the fire cover, and then use some cotton swabs or thin wires to dredge the nozzle. 4. If there is a new gas stove that cannot catch fire, it is very likely that the distance of the fire bracket is not well controlled, generally it should be controlled at about 4 mm, if it is not controlled to this distance, it is very likely that the fire hole can not be aligned, resulting in the natural stove can not be fired, in this case, we will align the fire hole on it. 5. It is also possible that the damper is too large, and it can be adjusted to be smaller.

If it still doesn't work, then you need to ask a professional maintenance master to come to repair.

What should I do if the gas stove doesn't catch fire? Gas stove is now one of the necessary kitchen utensils for cooking, in the process of cooking, people often encounter the gas stove can not ignite, gas stove automatic flameout and other phenomena, master the working principle of gas stove, can make us better check and troubleshoot.

1. The reason why the gas stove does not catch fire.

1. Whether there is gas or not: Most people will have a bottom in their hearts about this, but some people may be sloppy, or busy with work, and often forget, so when the gas stove can't catch fire, the first thing to check is whether there is still gas.

2. Overvoltage protection: Many gas stoves have overvoltage protection function, and they will not start once overvoltage.

3. Pipeline blockage: This is a very common problem, once the pipeline is blocked, it is necessary to check the gas outlet valve, generally speaking, you can smell the gas smell and the gas stove is not on fire, it is likely to be gas blockage.

4. Micro switch damage: At this time, there is a very small place in the gas stove, but it is more difficult to repair than the usual fault, generally speaking, it is not recommended that the owner repair it himself.

Second, the gas stove can not catch fire solution.

1. Blockage solution.

The fire hole of the burner fire cover is blocked by dirt, which hinders the flow out of the burner mixture gas and cleans the dirt of the fire hole; The nozzle is blocked, unscrew the nozzle to clean up; The air inlet and nozzle of the pressure regulator are blocked by rust, which hinders the gas flow out of the bottle, and the qualified pressure regulator is replaced; The hose is flattened and the ventilation is blocked, and the hose is straightened.

2. Always have a battery at home.

If the lighter is exhausted, we can lift the gas stove and replace the battery at the bottom, usually the gas stove uses No. 1 battery, in order not to affect the use, you can always have a battery at home, some high-end touch gas stoves and induction cookers on the market are powered by independent power supply, do not use batteries, this product is positioned as high-end, relatively rare, and will not be introduced here.

3. Adjust the position of the fire needle.

The position of the ignition needle of the stove is improper, if you want to ignite the fire, the stove has certain requirements for the distance between the ignition needle and the fire cover, once the distance deviates too much, it will cause the stove to not catch fire, usually the distance between the ignition needle and the fire cover is 4-6mm, and it is necessary to aim at the fire hole.

4. Replace the high-voltage line of the cooker.

The stove has a high-voltage line and its joint, once the high-voltage line is aging, it is easy to make the stove can not catch fire, then only need to add a set of high-voltage protection, this in ordinary life to pay more attention to observe.

5. Regular decontamination.

Users who use the stove should regularly clean the fire holes on the fire cover to prevent blockage, and should frequently clean the dust, cobwebs and other debris in the stove.

What should I do if the gas stove doesn't catch fire?

There are two needles on the stove One is called a thermocouple (flame-out protection device) One is called an ignition magnetic needle (pulse ignition device) Thermocouple is a thermal sensing principle If the thermocouple is broken, the outlet valve will be closed and it will not be lit with a lighter, so I infer that the ignition magnetic needle is pasted with sandpaper to wipe it or the solenoid valve is short-circuited If you buy a regular manufacturer, you will give after-sales service ** consultation.

There is a fire when the gas stove is pressed, and the fire is turned off when it is released, what is the reason?

1. Situations.

1. Reasons. With a new gas stove, it is difficult to set the gas stove on fire.

2. Solution.

In fact, this situation is because we stay for a short time when ignition, generally we can increase the ignition time for a while, you can press and rotate to the left, after hearing the clicking sound, it is generally in two to three seconds, and then ignite, so that it can be ignited.

2. The second case.

1. Reasons. Sometimes we can hear the crisp sound when we are igniting and still can't ignite, which may be because the gas path is not smooth.

2. Solution.

In this case, we can remove the fire splitter cover, and then use a thin iron wire to unclog its nozzle hole, and then install it back to see if it can be re-ignited.

3. The third circumstance.

1. Reasons. One of the two burners of the gas stove is normal and the other is abnormal, in fact, this situation is most likely due to the high-pressure pack in the electronic pulse being burned out.

2. Solution.

In the face of the above phenomenon, our easiest way to deal with it is to directly replace the pulse, which is still relatively difficult to solve, and you can find professional staff to solve it.

Fourth, the fourth situation.

1. Reasons. There will also be a situation where there is no fire, that is, there is a clicking sound, and the spark is also relatively fragile, which is caused by whether there is electricity, or the battery is not charged and cannot catch fire.

2. Solution.

Our solution to this is to replace the battery once a year, directly find the battery box of the cooker, and replace it with a No. 1 battery.

Gas stoves refer to kitchen utensils that are heated by direct fire with gaseous fuels such as liquefied petroleum gas (liquid), artificial gas, and natural gas. Gas stoves are also called gas stoves, stoves, stoves, and stoves, and their popularity is well known, but it is difficult to see a common concept.

According to the gas source, gas stoves are mainly divided into liquefied gas stoves, gas stoves, and natural gas stoves. According to the eye of the stove, it is divided into single foci, double foci and multi-eye foci.

What should I do if the gas stove doesn't catch fire?

1. First of all, check whether there is still gas.

2. Check whether the battery has power. If the gas stove battery is not used or used up, you only need to replace it with the ordinary No. 1 battery.

3. Check whether the positive and negative poles of the battery box are rusty, and whether the line is in poor contact. Solution: If the gas stove circuit is not in good contact, the rust needs to be removed and the line should be connected accurately.

There are two needles on the stove One is called a thermocouple (flame-out protection device) One is called an ignition magnetic needle (pulse ignition device) Thermocouple is a thermal sensing principle If the thermocouple is broken, the outlet valve will be closed and it will not be lit with a lighter, so I infer that the ignition magnetic needle is pasted with sandpaper to wipe it or the solenoid valve is short-circuited If you buy a regular manufacturer, you will give after-sales service ** consultation.

1: Check whether the solenoid valve is broken, 2: or whether the nozzle hole is blocked, 3: whether the air intake is too large at one time, adjust the damper.

Is the battery dead, or is there no gas? If that's not the case, try adjusting the damper.

If the Xinfei gas stove can't catch fire, it may be the reason for shouting God:

1.Gas valve not open: Make sure the gas valve is open.

2.Match or lighter issues: Use a new match or lighter to try to light the fire.

3.Blocked fire holes: Check whether the fire holes are blocked by oil or other substances, and clean the fire holes.

4.Gas pipeline problems: Check the gas pipeline for gas leaks or other problems, which need to be repaired by professionals.

5.Flame sensor: If the stove is equipped with a flame sensor, it may be that the sensor is faulty and needs to be replaced.

If none of the above methods can solve the problem, it is recommended to contact a professional maintenance personnel for maintenance. At the same time, it is necessary to pay attention to safety when using gas stoves to avoid accidents.

Summary. It may be that the battery in the gas stove is out of power, so even if there is gas, it will not catch fire. Solution: The battery in the gas stove needs to be replaced.

It may be that the battery in the gas stove is out of power, so even if the chain is gas, it can't catch fire. Solution: The battery in the gas stove needs to be replaced more clearly.

2.It may be that the protective needle of the gas stove is blocked by oil stains such as soup spilled during cooking. The solution to the old sail material decision: it is necessary to clean the protective car needle of the gas stove and remove the oil and dirt, and dredge the blocked place.

3.It may be that the internal circuit of the gas stove is faulty, and if the gas stove is used for a long time, the possibility of internal circuit failure is relatively large. Solution: It is necessary to know how to inspect the gas stove line and repair it early.

4.It may be that the position of the ignition needle of the gas stove has been shifted, so that the ignition is closed and the ignition needle cannot be ignited normally. The method of solving the sedan car sales decision: Hu guess needs to adjust the position of the ignition needle of the gas stove.