How to eliminate the 301 maintenance indicator of the flag

Press the one-time meter reset button on the instrument cluster and keep the button pressed. Turn on the ignition and odometer display to start counting down. When the display is displayed, release the button, and the wrench indicator in the instrument cluster display indicating maintenance operation should turn off.

1. The oil alarm light is on, which means that the oil storage capacity and pressure value are lower than the standard, if you do not stop and add oil as soon as possible, it will lead to insufficient engine lubrication, resulting in wear.

2. The water temperature indicator is used to indicate the temperature of the coolant in the engine, and some will display different effects in color, blue means that the water temperature is too low, red means that the water temperature is too high, and if it is not bright, it means normal. When the water temperature warning light shows that the coolant temperature is too high, the driver should stop immediately, if the driving continues, the engine will be hot, which will deform the cylinder block.

3. The engine fault light will generally light up when the car starts the self-test, and will automatically go off after starting the car, if the indicator light is found to be always on, it means that the engine may be faulty, and it should be stopped as soon as possible for inspection.

4. The brake system fault light, exclamation mark and a circle sign indicate that the brake system is faulty, at this time, the driver should first confirm whether the handbrake is completely released, and then check whether the brake fluid position is normal or whether the brake pads are too thin. If the sign is always on, stop immediately.

5. The door indicator light is lit to indicate that the door is not fully closed, and the car door or engine front cover should be stopped immediately to check whether the door or engine front cover is completely closed. If the door opens suddenly while driving, a serious traffic accident can occur at any time.

1.Turn off the key.

2.Press and hold the zero button There is a button near the maintenance tip.

3.Open the key and see Zero.

4.Flameout! Open again and you're done!

Kiss! If it helps, thank you (

The button on the meter (just one), the ignition switch is off and hold this button, turn on the switch, the meter screen displays the countdown, turn off the switch after the countdown is zero, and the zero is over.

1.Close Key 2Press and hold the zero button There is a button near the maintenance prompt3Open the key and see Zero 4Flameout! Open again and you're done! Kiss! If it helps, thank you (

Hello, if you have indeed changed the oil, it is recommended that you go to the 4S shop to read the code to eliminate, I wish you a happy life, hope.

Operate in the state of the vehicle turned off, press the reset button on the dashboard, turn on the vehicle, do not start, observe the dashboard, when the symbol = 0 appears, prove that the vehicle's maintenance light has been reset to zero, and then turn off the vehicle and restart it before it can be used.

What is the body size data of the logo 301?

Vehicle size data length 4442mm, vehicle size data width 1748mm, vehicle size height 1476mm, vehicle size wheelbase 2652mm, vehicle size front wheel track 1501mm, vehicle size rear wheel track 1478mm, vehicle first shirt early small ground clearance 120mm, vehicle is a four-door five-seat sedan, fuel tank 53 liters, trunk 485 liters.

The manufacturer of the logo 301 is **.

It is Dongfeng Peugeot. Dongfeng Peugeot is a subsidiary of Dongfeng Peugeot Automobile and is a car brand under the company. DPCA is a joint venture between Dongfeng Motor and PSA Group.

PSA Group represents PSA Group and is headquartered in Xiangyang, Hubei Province. It was established in October 2002.

Millions of car purchase subsidies.

The steps of the Peugeot 301 maintenance light to zero are as follows:

1. Press the zero button of the single meter on the instrument cluster, and keep the button in the state that Kaikong is pressed 2. Turn on the ignition switch;

3. The odometer display starts to count down. When the display shows dead skin, release the button, and the wrench indicator light indicating the maintenance operation in the display of the instrument cluster should be extinguished;

4. Note: After this operation is completed, if you want to disconnect the battery cable, you must lock the vehicle and wait for at least 5min, otherwise the zero will not be recorded by the control unit.

Pacific Automobile Network] first turn off the ignition switch, press the single meter zero button on the instrument cluster, and then turn on the ignition switch, then the odometer will begin to count, when the display screen displays, release the button, at this time the instrument cluster display screen indicates that the maintenance operation of the wrench indicator light is off, indicating that the Peugeot 301 maintenance light has been successfully zeroed.

Based on the trust of 12 million users around the world in the 3 Series, Dongfeng Peugeot 301 is dedicated to creating a new generation of quality pioneer intermediate car. With a pure, smooth and elegant design language, it brings French elegant design, with 2652mm large wheelbase and EPS+4 airbags and other pioneer configurations.

Meet the needs of users and bring a relaxed and pleasant driving experience. The car was designed primarily for emerging markets, while also adopting Peugeot's new naming strategy. In terms of appearance, the Peugeot 301 adopts a new family-style front face.

The Peugeot 301 adopts a sedan design, with a body length of 4440mm and a wheelbase of 2650mm, the overall design is very compact, the tail styling design is short and powerful, and the trunk volume of the car is 506L.

In addition, the name of Dongfeng Peugeot 301 is also interpreted as the first car before the age of 30; According to its design concepts such as a large number of references to the natural elements of dust cherry blossoms, such as water droplets in the wind, wind erosion sculptures and flowing water surrounding, it is also considered to be a real feng shui wheel. (Photo by Chen Jie 2).

If you find that the Peugeot 301 is turned on after the ignition switch is turned on, a wrench mark occurs on the left side of the kilometer, which confirms that it is time for the car to be maintained, and the wrench mark is the maintenance display light, and the mileage will be restored to the normal situation of the cautious person after a few seconds of connection, but if the maintenance mileage is less than 1000km, the wrench mark will always be on, and we will tell you how to eliminate the maintenance light of the Peugeot 301.

Peugeot 301 maintenance lamp zero process:

1.Turn off the ignition.

2.Press the zero button on the maintenance light indicator, and then turn on the ignition.

3.The mileage will gradually count down, and when the display shows "=0", it means that the Peugeot 301 maintenance light has already been successfully reset to zero, and the button can be released at this moment.

Then we also have a way to make the marked 301 maintenance lamp to zero, that is, to go to the marked authorized service item store to do maintenance, after the maintenance, the maintenance personnel will use a technical professional inspector to carry out the maintenance of the lamp to zero. It is worth mentioning that although we can remove the maintenance light when it flashes, it is best to maintain it as soon as possible, after all, maintenance at a certain level can ensure the safety factor and reliability of the vehicle.

Millions of car purchase subsidies.

If the ignition is turned on, a wrench symbol appears on the left side of the mileage of the Peugeot 301, which proves that your car is time to be serviced, and that wrench symbol is the maintenance indicator. After a few seconds of opening, the odometer will return to its normal state, but if the distance from the maintenance mileage is less than 1000km, the wrench symbol will always be lit. Let Bian Xiao show you how to eliminate the repair lights of the Peugeot 301.

Steps to zero the Peugeot 301 maintenance light:

1.Turn off the ignition.

2.Press and hold the maintenance light indicator zero button and turn on the ignition.

3.The odometer will start counting down. When the display shows "=0", it means that the Peugeot 301 maintenance light has been successfully zeroed. At this point, you can release the button.

Then, we have another way to reset the maintenance light of the sign 301 to zero, and that is to go to the authorized service store of the sign to do maintenance. After the maintenance is completed, the maintenance personnel will use a professional detector to zero the maintenance lamp. It is worth mentioning that although we can eliminate it when the lamp is lit, it is best to maintain it as soon as possible.

After all, maintenance can ensure the safety and stability of the car to a certain extent.

Summary. Hello dear and thank you for waiting. Like the Peugeot 301 model, if the maintenance kilometers have not arrived, but the maintenance light is lit, then it means that your maintenance time has arrived, like the maintenance light of this model is calculated according to the time and mileage, if the mileage has not arrived, then it can only mean that the time has come, like this case you can also go to maintenance.

If the maintenance cycle has not yet reached the time or from the mileage, this can wait for a while, according to the mileage you are driving now and then to maintain it, this does not mean that the maintenance light is on must be maintained, or according to your driving conditions to determine whether to maintain. <>

<> Peugeot 301 maintenance kilometers did not arrive, and the maintenance failure light was on.

Hello dear and thank you for waiting. Like the Peugeot 301 model, if the maintenance kilometers have not arrived, but the maintenance light is lit, then it means that your maintenance time has arrived, like the maintenance light of this model is calculated according to the time and mileage, if the mileage has not arrived, then it can only mean that the time has come, like this case you can also go to maintenance. If the time or mileage has not yet reached the maintenance cycle, this can wait for a while, according to the mileage you are driving now and then to maintain it, this does not mean that the maintenance light must be maintained, or according to the condition of your driving cover to determine whether to maintain.

<> Peugeot 301 automatic transmission suddenly has no power during driving, dear, if there is suddenly no power during driving, this main consideration is caused by the car's poor fuel supply. <>

<> should be repaired**.

Dear, this is the main repair of the car's fuel supply system, including the fuel pump and fuel filter. <>

<>Yesterday, the mechanic helped me clean the throttle, and said it would be fine.

Dear, if there is no power for the acceleration of the car song, this has little to do with the first warning door of the Sakura Ming solar term, and the throttle will mainly affect the idle trembling. <>

<> the fuel pump and filter are removed and cleaned, or replaced with a new one?

Dear, the fuel pump can be cleaned up, but the fuel filter needs to be replaced. <>

How much does it cost to change the <> filter.

Dear, if you change the filter of this car, ** is about 150 yuan. <>

The zeroing steps of Dongfeng 301 maintenance lamp are as follows:

1.First, turn off the ignition and press the zero button for the individual gauges on the instrument cluster.

2.Next, turn on the ignition and the countdown begins.

3.When the display shows 00000, release the button.

4.At this time, the wrench indicator light indicating the maintenance operation in the instrument cluster display turns off, indicating that the Peugeot 301 service light has been successfully zeroed.

The following is a partial introduction to the Dongfeng Peugeot 301:

1.Based on the trust of 12 million users around the world in the 3 Series, we will create a new generation of Quezen quality pioneer intermediate cars.

2.The Peugeot 301 has a sedan design with a body length of 4,440 mm and a wheelbase of 2,650 mm. The overall design is very compact, and the tail design is short and powerful. The trunk volume of this car is 506L.

Peugeot 301 oil lamp is on, what's the matter, hello pro 1, the oil pressure is not enough; 2. The oil pressure sensing plug is faulty; 3. The oil pump is damaged; 4. There is a fault in the line between the oil pressure switch and the instrument. The oil light of the car may be on due to insufficient oil pressure or faulty oil pressure sensing plug. If the oil is normal, check whether the oil alarm switch and wiring are normal, if there is no problem with the above, it is best to go to the repair shop to check the engine and oil pump problems.

The main reasons for the oil light of the car are as follows: 1. Insufficient oil volume: the oil volume of the oil pump is reduced or the pump cannot be oiled due to air intake, which causes the oil pressure to drop and cause the oil lamp to alarm.

I hope I can help you, I wish you a happy life and smooth work! <>