How do you eliminate Volkswagen maintenance lights?

The method of zeroing the Volkswagen maintenance light is generally to turn off the door key, wait for the lights on the dashboard to go out, press the reset button on the right side of the dashboard with the left hand, and then open the electric door with the right hand.

The maintenance light is a reminder function set by the car factory for the owner to set according to a certain mileage or time, and reminds the owner of the maintenance of the model in the form of instrument or screen information or indicator lights. Zeroing of the maintenance lamp means that after the maintenance is completed, a reset is carried out on the reminder information, that is, the information is reset.

The original intention of the car maintenance light is to remind the car owner to do maintenance as soon as possible, then the owner should go to the 4S shop for maintenance as soon as possible, and after the maintenance is over, the 4S shop will reset the maintenance light for the vehicle through the fault diagnostic instrument. The fastest and most accurate way to eliminate the maintenance of the prompt light is to use the fault diagnostic instrument, the owner generally does not have this kind of equipment, it is recommended that the owner go to the 4S shop to eliminate the prompt light after maintenance or to the outside 4S shop to eliminate.

1.Turn on the ignition, press and hold the "reset button" with one hand, and turn off the ignition with the other;

Press and hold the "reset button" and do not let go until the clock and mileage on the meter are completely not displayed (there should be no display on the meter, black screen), release the button;

After holding the "reset button" again with one hand, turn the ignition back on. At this time, the maintenance prompt on the instrument is flashing, press and hold the "reset button" and do not release. Wait for the maintenance prompt to stop flashing, then release.

Turn the ignition back on or start the vehicle and check if the clearance is successful.

One:1 Turn off the ignition. 2 Then press and hold the odometer hour reset button at the same time when the ignition switch is turned on, and the prompt message is still displayed after ignition.

3Press and hold the odometer hour reset button for about 3s within 30s, and the prompt message is completely eliminated. If the information cannot be eliminated due to the failure to comply with the requirements or the operation is incorrect, you should start from scratch.

Two: 1 Turn off the ignition. 2Turn on the ignition while pressing the clock adjustment button "set".

3 Let go of the "set" button and press the "set" button again. 4Turn off the ignition switch, turn on the ignition switch, and see if it returns to zero. If not, you have to start from scratch.

There are many tutorials to look at the maintenance manual or online, and more importantly, the maintenance light is actually to remind you that it is time for the car to be maintained. So in fact, many times, because we use better oil, so the maintenance time will be much farther than the manufacturer's preset mileage, I use the imported G T magic red engine oil, the only oil on the market that contains molybdenum is G T magic red engine oil, ***, the cost performance is particularly high, 15000 kilometers to replace once!

Turn off the key Press and hold the zero button at the bottom right of the speedometer Turn on the key, release the fishing back to zero button and then press and hold the time adjustment button. Generally run 8000 to maintain, otherwise there will be a problem of poor power of your car, 4S shop recommendation is 10000 kilometers to do a zero, but the oil used is not good, I run every time a 8000 or so on the lack of power, I have to do maintenance, too troublesome, after the replacement of the imported G T magic red oil, this oil is durable, is the base oil of four types of PAO, there is no problem with a change to run 15000, a change can be done once, it is more convenient.

If there is a manual reset and a computer reset, if you manually reset it, press the button on the dashboard for about 5 seconds, and it will be eliminated, and if the computer resets, you need to diagnose the computer reset.

How to eliminate car maintenance lights? Removing the maintenance light is also known as zeroing or resetting the maintenance light.

The maintenance light is a reminder that the owner should maintain the vehicle in time. After the maintenance is completed, the maintenance light needs to be zeroed. Most models need to be zeroed with the help of a decoder.

The common ones are X431Pro3S+, Daotong 908, etc., or the professional maintenance lamp zeroing tool X-300. These instruments are generally only available in auto repair shops, and all vehicles that need to be cleared must be repaired in which repair shop, and the master must reset the maintenance lights.

Some vehicles don't require a decoder. Zeroing can be done manually. The instrument panel has a protruding pushbutton.

Turn the key off to the OFF position (a vehicle with a one-button start turns off the vehicle). Press and hold the button without letting go for more than three seconds, and screw the key to the ON position without starting the engine (press the start button without stepping on the brake for one-button start, and turn on the power supply). Continue to press and hold the button for three seconds to reset the maintenance light to zero.

At this time, the central control computer automatically recognizes the next maintenance mileage (or cycle.

1. Close the door first, and press and hold the "OK" button on the left side of the steering wheel when the instrument panel is not powered on;

2. Then power on the central control, and it will take about 3-5 seconds to eliminate the maintenance lamp;

3. If the car maintenance light is on, it is a reminder to do oil change maintenance, and it is best not to eliminate it at will without maintenance.

Or the computer elimination of the 4S shop.

The maintenance lamp can be eliminated by the master of the 4S shop or auto repair shop. Switch to a higher grade of fully synthetic engine oil for longer service intervals. After the first warranty of my car, I asked the 4S shop to zero the maintenance light, and then I maintained it myself and bought G T magic red engine oil, PAO engine oil power has good long-term effect, and the power ran 10,000 kilometers before a slight decline, and it completely needs to be replaced to run to 15,000 kilometers.

If you change to ordinary fully synthetic engine oil, the power limit is only 8,000 kilometers, but after 5,000 kilometers, the car will struggle because the power has begun to drop significantly.

Turn off the ignition;

Press the single meter reset button on the instrument cluster and keep the button pressed;

Turn on the ignition;

The odometer display starts counting down, and when the display is displayed, the maintenance light can be eliminated by releasing the button. The function of the maintenance indicator light is to remind the owner that the car is time for maintenance, and car maintenance is a preventive work that regularly inspects, cleans, supplies, lubricates, adjusts or replaces certain parts of the relevant parts of the car, also known as car maintenance.

The trip computer for maintenance lights can be adjusted, and the performance of cleaning and durability with good quality fully synthetic engine oil will be better than that of the original engine oil, and the maintenance cycle will naturally be longer. I changed the G T magic red engine oil, four types of PAO base oil, more high-end than ordinary fully synthetic engine oil, the maintenance cycle is also longer, the basic 15,000 kilometers to change, and the power of 10,000 kilometers to the decay period, the decay speed is relatively slow. During this period, the power supply is sufficient and stable, and the car is easier to drive.

1. Turn off the ignition switch first to ensure that the vehicle has been turned off. 2. Press and hold the right-click (back to zero adjustment) button, and the position is on the dashboard. 3. Keep holding the right button with your left hand while turning on the ignition switch.

4. Keep holding the "Back to Zero Adjustment" button with your left hand and wait until the maintenance light enters reset mode, then release the right button (Return to Zero Adjustment Button). 5. Press the "Menu Button" within 20 seconds of releasing the right button to confirm the reset.

Volkswagen Tuyue maintenance lamp to zero.

1. Turn off the ignition. (Flame-off).

2. Press and hold the button.

3. Press and hold the "button" while turning on the ignition switch and do not let go.

4. After that, the Na Zhenghui text will be displayed on the instrument information display, and we will release the "button" at this time.

5. Press the "button again" to confirm. (One press is all it takes).

6. At this time, the maintenance lamp has been reset to zero, if the clear fruit has not been returned to zero, you need to start again.

Volkswagen's other maintenance lights are reset to zero.

1. Turn off the ignition switch first to ensure that the vehicle has been turned off.

2. Press and hold the right-click (back to zero adjustment) button, and the position is on the Yidong answer dial.

3. Keep holding the right button with your left hand while turning on the ignition switch.

4. Keep holding the "Back to Zero Adjustment" button with your left hand and wait until the maintenance light enters reset mode, then release the right button (Return to Zero Adjustment Button).

5. Press the "Menu Button" within 20 seconds of releasing the right button to confirm the reset.

When the maintenance light is on, it means that the vehicle should be serviced. Some models can only be operated by a dedicated computer for the model, and the maintenance lights cannot be reset to zero manually.

The mechanical life of the vehicle is much longer than before. However, the maintenance of some important parts should be carried out as scheduled, so as to ensure the safety, economy and reliability of the car. Assuming that the vehicle has been exposed to dusty or cold and heat for a long time, it is necessary to maintain the vehicle in advance even if the maintenance time has not yet arrived.

Photo by Q&A) M5 Trumpchi GS8 AION V Macchiato DHT PHEV Latte DHT Hiphi X @2019

1. Turn off the ignition switch and turn off the ignition.

2. Press and hold the right-click (return to zero reset) button on the dashboard with your left hand.

3. Keep holding the right button with your left hand while turning on the ignition switch.

4. Keep holding down the "Return to Zero Reset" button with your left hand and wait for the maintenance light to enter reset mode, then release the right button (Return to Zero Reset button).

5. Within 20 seconds of releasing the right button, press the left button "Menu Button" once to confirm the reset.

6. According to the above process, the maintenance cycle indicator will be cleared and restored to the regular display mode.

Clause. Second, when we press and hold the [reset button 5] button, we must never let go, we must wait until the clock and mileage on the meter are not displayed at all, that is to say, on the instrument, there must be no display, that is, a complete black screen, and then you can release the button.

Clause. Third, after doing the above steps, at this time we have to start again, continue to use our hands to press and hold the button of [reset button 5] again, we need to reopen the ignition switch on the car at this time, we see that the maintenance prompt on the instrument is shaking, then we must press and hold the [reset button 5], wait for the car's maintenance prompt not to flash, and release the button.

Clause. Fourth, when you release the button, then we need to try whether we have succeeded, so we need to turn on the ignition of the car again, it is best for everyone to start their own car, so that you can check whether our method has been cleared successfully.

Clause. Fourth, Toyota or Honda, cancel the maintenance of the lights also need a few simple steps, first of all, you need to give your car a complete fire extinguishing, and then we need to press and hold the reset button, everyone pay attention to the odometer to clear the position, press and hold on the line.

Clause. Sixth, now everyone's right hand needs to start turning the key of the car to your car electric door, everyone pay attention to a point, here is not to say your ignition position, and then we start to turn the left hand clockwise, that is, you have to rotate the reset button to the right, this point must be noted.

Clause. 7. After the above steps are completed, you need to press and hold the mode button, and then we need to turn off the ignition switch of the car, so that your car can complete the zeroing, all after the action is over, you can restart the car to do an experiment, generally speaking, this trick is very smart.

Elimination method 1: This method is suitable for some Volkswagen's cars, such as Golf, Bora, etc. The first step is to turn off the switch and press the "set" button on the odometer side.

Secondly, press and hold the button ignition switch, and the display area will enter the zero mode. It is best to release the button and press the button in the lower left corner of the tachometer within 20 seconds, and the display will return to the normal display mode in a moment.

Elimination method 2: This method is suitable for Audi series products, such as Q5, Q6. Turn off the ignition, then press and hold the button on the right on the dashboard, then turn on the switch, the display shows "Service", press and hold the button on the left on the dashboard until the next maintenance mileage is displayed, then release.

Elimination method three: This method is also a Volkswagen series of cars. Go to the Volkswagen CAN BUS system to the instrument system to match the function to 002 and then change 00001 to 00000.

Elimination method four: This is for the general vehicle, turn off the key and pull out the key, press and hold the lower right button of the instrument panel, insert the key to keep the state of power, release after powering, after the sign of the small wrench appears, press the lower left button of the dashboard, and the sign will disappear.

Elimination method 5: Press and hold the reset button with one hand, and then turn the ignition back on. At this time, the maintenance prompt on the instrument is flashing, press and hold the "reset button" and do not release. After waiting for the maintenance prompt to stop flashing, release the button. Restart the car and see if it flashes.

Elimination method six: The most convenient way to eliminate the maintenance lamp is to use a fault diagnostic instrument, and the owner only needs to go to the 4S store to eliminate it.

The car maintenance light is a reminder that you have reached the maintenance cycle and need to be maintained as soon as possible, and the car computer will be eliminated by the S4 store or your maintenance store after the maintenance is over.

Hello, Toyota car maintenance lights can be reset to zero, the steps are as follows:

1. Turn off the vertical fire key, press and hold the mileage reset button on the dashboard, which can be seen on the dashboard, black.

2. Turn on the ignition switch and turn the clock adjustment button right until the maintenance light disappears.

With the increase of driving time, the wear and tear of the accessories inside the vehicle will gradually become serious, in order to ensure the normal operation of the car, the manufacturer in the production of the car, set up some reminder indicators, to a certain mileage, the owner should replace the accessories in time, after the successful replacement, it is also necessary to zero the car maintenance light.

The function of these lights is to record the mileage of some important accessories, and the remainder argument is like a timer in a sprint race, which plays a role in reminding the owner of the car and the car maintenance staff. What will happen if the owner replaces the relevant parts and does not reset the maintenance light to zero. Mr. Li, an auto maintenance master, said that many car owners will zero the corresponding car maintenance lights after replacing auto parts, which is an official proposal and what many car owners are willing to do.

If the owner replaces the relevant accessories, but does not return to zero, it will not affect the performance of the vehicle, but it will bring trouble to the next replacement of the auto parts: it is not possible to know exactly when the new parts will be used.

Hope it helps!