What are the ways to deal with jujube wood furniture to prevent cracking and deformation?

The freshly cut jujube wood should be cooked as soon as possible before cracking and insect decay, generally for more than seven days, so that the resin of fresh jujube wood decomposes, the internal stress disappears, and the purpose of anti-cracking, insect-eaten and deformation prevention is achieved. However, the steamed jujube wood for furniture affects the luster. Cooking method The freshly cut jujube wood should be cooked as soon as possible before cracking and insect decay, and it is generally necessary to cook for more than seven days, so that the resin of fresh jujube wood decomposes and the internal stress disappears, so as to achieve the purpose of anti-cracking, insect-eaten and deformation-proof.

However, the steamed jujube wood for furniture affects the luster.

<> soaking in brine can also achieve the purpose of anti-cracking, anti-insect and anti-deformation, which is equivalent to pickling jujube wood into pickles, of course, it will not crack, but after soaking the pickled jujube wood in salt water to make objects, it will return to brine after cloudy and rainy, and the treatment cost is also very high. But the drying process is quite complex, and he takes a scientific look at the density of the wood, its character, the high bottom of the temperature, and the length of time.

Generally speaking, because the large jujube tree is relatively old, the growth cycle and time of the whole tree are relatively long, so the trees with relatively thick wood, once they are put down, are not treated and effectively protected in a short time, the trees will soon crack, and the freshly cut jujube wood with cracks should be cooked as soon as possible before cracking and insect moth, and generally should be steamed for more than seven days, so that the resin of fresh jujube wood will decompose, and the internal stress will disappear, so as to achieve the purpose of anti-cracking, insect-eaten and anti-deformation. However, the steamed jujube wood for furniture affects the luster.

If you want to reduce the cracking of wood, you can use the method of high temperature qualitative, you can carry out high temperature and high humidity treatment after the wood is dried, so that the excess water of the wood is successfully evaporated, and the wood can maintain a relatively stable form and will not crack casually.

When using these furniture, you can put some insulating items on it, such as placing some thermal insulation pads, so that the furniture will not be damaged during use.

First, the deep burial method, fresh jujube wood needs to be immediately oxygenated deep burial treatment, it is recommended to bury in the silt of the pond, and then use the method of oxygen isolation to decompose the resin, so as to achieve the purpose of anti-cracking, anti-deformation and insect-proof. Second, the cooking method, we need to do the cooking treatment as soon as possible before the freshly cut jujube wood is cracked and moth-eaten, and it generally needs to be cooked for more than seven days, because it can decompose the resin of fresh jujube wood, so that the internal stress disappears, and the purpose of anti-cracking, insect-eaten and anti-deformation is achieved. However, it should be noted that furniture made of steamed jujube wood will affect its luster.

3. Anti-cracking agent soaking treatment, soaking jujube wood with professional jujube anti-cracking agent, it takes 30-40 days for logs to be soaked, and 20-30 days for soaking boards, so that the purpose of anti-cracking, insect-eaten and anti-deformation can be achieved, and its cycle is short, the cost is low, and it will be more suitable for specialized production for the first two ways.

It is necessary to bury the fresh jujube wood in time with oxygen insulation, and use the method of oxygen isolation to decompose the resin in the silt of the buried pond to eliminate the internal stress, so as to achieve the purpose of anti-cracking, anti-deformation and anti-insect moth. There are also jujube trees that should be steamed and boiled before cracking and insect eaten, and they should be steamed for more than seven days to prevent fission.

The solution is to control the temperature at home, not too high will not deform the wood, and wipe it regularly with protective paint, so that it will not dry out.

1. The anti-cracking method of jujube wood is actually very simple: as long as it is dried, jujube wood will not crack. How to prevent cracking of jujube wood is natural shade drying. There is skill in the shade drying of jujube wood. Let's talk about how to dry jujube wood in the shade.

2. Generally, the newly killed jujube wood should be soaked in water for a period of time, and the general soaking time is about half a year. After soaking, we put the jujube wood on a high slope to dry naturally, which refers to the shade-dried wood. In this way, the jujube wood processed by natural technology will generally not burst and crack in use.

This is also the most primitive and oldest jujube wood anti-cracking treatment technology.

Hello, jujube wood is prone to cracking during the production process, in order to prevent cracks in jujube wood, there are the following measures:

1. Choose high-quality logs: Choose high-quality logs with uniform wood, slow growth and tight growth rings, which can reduce the possibility of cracking of jujube wood.

2. Proper control of humidity: Jujube wood needs to be controlled in the production process to avoid the wood being too dry or too wet, and can be controlled by humidifiers or ventilation equipment.

3. Pay attention to the direction when cutting: pay attention to the direction of the texture when cutting jujube wood to avoid excessive pressure during the cutting process, which will lead to cracks.

4. Preventive treatment: When making jujube wood furniture, some anti-cracking agents can be used for preventive treatment, which can effectively reduce the cracking of jujube wood.

5. Keep the environment stable: Jujube wood furniture needs to keep the environment stable during use and avoid being exposed to too dry or too humid environment, so as to sing the service life of the furniture and reduce the possibility of cracking.

No matter what kind of mahogany furniture, there will be some shrinkage and deformation! If it's a small crack and a small deformation, you can ignore it, and wait until next spring, when the moisture in the air increases, and the crack will naturally heal! Paper, if placed in the air-conditioned room for a day, the wood is dry and not thorough, some bending will occur, and the same is true for mahogany furniture, so in winter mahogany furniture is prone to cracking and deformation, we must pay attention to it during maintenance.

Fresh jujube wood should be buried deep in time, and it is best to bury it in the silt of the pond, decompose the resin by the method of oxygen insulation, eliminate internal stress, and achieve the purpose of anti-cracking, anti-deformation, and insect-proofing. The newly cut jujube wood should be deboarded as soon as possible, and the anti-cracking treatment should be done after the deboarding, saving local space, saving time, anti-cracking agent and labor. The anti-cracking agent soaking treatment is completed at one time, and the jujube wood treated by the anti-cracking agent soaking process has a high density and bright color.

The newly cut jujube will be soaked in water for a period of time, the general soaking time is about half a year, and then it will be placed on the high slope to dry naturally, so that the processed jujube will not crack in the process of use. Point slope, shelter from wind and humidity in the shade or indoors, also need to have ventilation vents. When stacking the shelves, bricks or flat dry wood should be placed in the middle, and each layer is vertical, so that it is not easy to deform.

To set the top cover, use pressure to let the wood.

You can try the method: buy furniture and wipe it with a dry cloth, and then wrap it in old socks and rub it vigorously with raw walnut kernels, so that the walnut oil will no longer crack after seeping into the wood. The moisture content of the plate is unqualified, and this deformation is irreparable, especially the deformation of the side panels, which directly leads to the overall dislocation of the wardrobe.

This is a factory drying problem and has no repair value. Solution, find merchants and factories to replace the deformed plates, if it is more usually summer furniture if it swells because of water absorption, this does not need to worry too much, after the dry weather in winter, the furniture will recover by itself.

This type of furniture is relatively easy to deform. And when maintaining, it should also be wiped with some maintenance oil in time, and it should also be placed in a relatively dry environment, and it should also pay attention to ventilation at ordinary times.

The wood of jujube wood is relatively solid and not easy to bend, so it generally only needs to be wiped and waxed regularly.

Yes, this kind of wood will also be deformed, and it will become loose when it is heated, so don't have too strong sunlight when you usually maintain it.

1, on the dry wood with wire bundle ends, the use of anti-crack rings, combined nail boards, etc., with mechanical methods to force the wood not to shrink and expand, this is the old carpentry commonly used method 2 change the sawing method, especially with the pith of the board is easy to occur serious splitting when dry, this is due to the left of the medullary center along the vertical and transverse expansion difference provoked, it occurs in the early stage of dryness, and finally the crack only appears on the surface of the end, with the boring pause it can be towards the medullary center and along the vertical expansion. This crack is difficult to avoid when it is dry, and the best way to do this is to prevent the consumption of the piping core during the preparation of the lumber ("de-core"). 3 Paint with waterproof paint:

Applying waterproof coating to the ends and surface of the wood slows down the evaporation intensity of the wood surface, which can increase the moisture content gradient inside and outside the wood, and can also increase the cracking of the wood. 4. The use of low temperature treatment, can stop the low temperature and high humidity treatment of the wood before the completion of the drying process to eliminate. During disposal, the remaining deformation of the surface layer of the wood due to humidification shrinkage is reduced, which is offset by the original extension residual deformation, and the excess water is evaporated after disposal.

5. Stop the immersion treatment with waterproofing agent: The ineffective method is to stop the pressurized treatment with waterproofing agent, so that the waterproofing agent can deeply enter the wood to achieve a good anti-cracking effect of durability.

What we commonly use today is the boiling method, which will not crack at all for 24 hours.

How to deal with jujube wood will not crack How to prevent cracks in jujube wood.

Hello, dear, is answering the question for you, how to deal with jujube wood, how to prevent cracks, how to prevent cracks. Mechanical crack prevention As the name suggests, mechanical crack prevention uses a more mechanical way to prevent jujube wood from cracking, and can be specially equipped to tie the two short pieces with iron wire in the case of dry wood, and use other tools to prevent jujube wood from cracking. High temperature qualitative If you want to reduce wood cracking, you can use high temperature qualitative methods, you can carry out high temperature and high humidity treatment after the wood is dried, so that the excess water of the wood is successfully evaporated, and the wood can maintain a relatively stable form and will not crack casually, and the internal cracking has also been successfully eliminated.

How to deal with jujube wood will not crack How to prevent cracks in jujube wood.

Mechanical crack prevention. As the name suggests, the mechanical method of anti-cracking uses a more mechanical way to prevent cracking of jujube wood, and can be specially equipped to tie the two short pieces with iron wire when the wood is dry, and prevent cracking of jujube wood with the help of other tools. High temperature qualitative.

If you want to reduce the cracking of wood, you can use the method of high temperature qualitative, which can be treated with high temperature and high humidity after the wood is dried, so that the excess water of the wood is successfully evaporated, and the wood can maintain a relatively stable shape. Brush with paint. Water-repellent paint can be applied to both ends and surfaces of the wood to increase the strength of the wood surface, which can make the wood more stable, and cracking can also be minimized, making the wood stronger.

Immersion with waterproofing agent.

1. Deep burial method: fresh jujube wood should be buried deep in time, preferably buried in the silt of the pond, decomposed resin by means of oxygen isolation, eliminate internal stress, and achieve the purpose of anti-cracking, anti-deformation and insect-proof, to be buried for more than three years, the wood will change color due to the dipping, affecting the color.

2. Cooking method: jujube wood should be cooked as soon as possible before cracking and insect moth, and it should be steamed for more than seven days to decompose the resin of fresh jujube wood and the internal stress disappear, so as to achieve the purpose of anti-cracking, anti-insect moth and anti-deformation. However, the steamed jujube wood for furniture affects the luster.

3. Anti-cracking agent soaking treatment: soaking jujube wood with a professional jujube anti-cracking agent, soaking the log for 30-40 days, and soaking the board for 20-30 days can achieve the purpose of anti-cracking, insect-eaten and anti-deformation, cycle section, low cost, and more suitable for specialized production than the first two methods.

No matter how many years the wood is left in one place, it adapts to the temperature around it, and if it's higher than that, it's going to crack, and if it's exposed to the sun, it's going to crack, and then it's going to crack, so there's no cracking.

I heard others say that jujube or peach wood should be soaked in water for more than half a year, and then taken out to dry. It shouldn't crack, you can put it in the fish tank if you have a fish tank at home, there will be a layer of sticky things on the surface of the wood every once in a while, wash it off with water in the bubble, and repeat it a few times, it should be OK, I haven't tried it, and the effect is not known.

Try to keep the air moist and protect from wind and sun, and apply paint.

It is better to soak it in tung oil.

Try to keep the air moist and protect from wind and sun, and apply paint.