How to maintain the outdoor antiseptic wooden gazebo? What kind of paint is generally used?

Generally regular use of wood wax oil.

Go for maintenance. Outdoor antiseptic wood coated with wood wax oil can be antiseptic, and environmentally friendly.

The construction process is as follows:

1.It must be processed at a temperature of 8 or more.

2.The wood must be dry with the highest moisture content.

No more than 15%.

3.Before applying wood wax oil, the surface of the wood should be sanded with a fine abrasive cloth and wiped clean until the surface is smooth. If there are fibers on the surface of the wood, you can use wood sandpaper P240 or above to gently sand.

4.Stir well before use, no need to dilute; If the viscosity of the product is high, a small amount of special diluent can also be mixed in.

The amount added should not exceed 10%.

5.Brush with soft brown brush, brush evenly and thinly along the direction of the wood grain, remove excess wood wax oil after brushing, and the amount of brush must be small, not too thick; After the surface is dry, gently polish and wipe the coated object, and it can be applied for the second time in 12 hours.

6.Before wiping, soak the dust-free cloth evenly and squeeze out part of the excess wax oil; When wiping, the force should be even, not too heavy or too light, first along the surface of the coated object alternately horizontal and vertical rubbing several times, and finally along the direction of the wood grain at the end, so that the wood wax oil fully enters the wood grain, let it stand to dry; After the surface is dry, gently polish and wipe the surface of the coated object, and operate it again in the same steps.

How to maintain the outdoor antiseptic wooden gazebo? What kind of paint is generally used? I think that outdoor antiseptic wooden gazebos generally need waterproof paint. Because he's outdoors. Sun. If you use waterproof paint, this will prevent it from rotting.

Pro, the anticorrosive wood pavilion is generally built with wood and steel structure, the wood part requires treatment of anti-corrosion, generally using plastic powder spraying or paint treatment, the use of paint coating can better protect the wood from corrosion, and the steel structure part requires the treatment of fire prevention and anti-corrosion, generally using hot-dip galvanizing or spraying epoxy powder paint treatment. Therefore, the anticorrosive wooden gazebo requires the brushing of fireproof paint and anticorrosive paint. Fireproof paint is a kind of coating made of epoxy resin as the base material, with a variety of polyolefins and additives, and dried, which has good fire resistance to prevent the wood pavilion from being burned by fire, and can effectively extend its service life.

Anticorrosive paint is a kind of coating that uses epoxy resin as the base material and anti-acid and alkali additives to resist corrosion. It can effectively prevent the wood gazebo from being eroded by acid and alkaline pollutants and prolong its service life.

1. Determine whether it is anticorrosive wood or carbonized wood, if it is carbonized wood, brush the varnish, and maintain it once every six months to a year.

2. If it is anticorrosive wood, you did not brush the color at that time, it is the natural color of solid wood, brush varnish, if the color becomes older over the years, you can also consider brushing the color, there are anticorrosive wood paint, California red, rust red, brown and black and other colors are used more.

3. If there is already a color, it is best to brush the original color or brush a darker color to cover the original color.

Varnish (also called varnish) is generally used, and paint shops generally sell it

When the color fades, paint twice with weatherproof wood oil, and the paint on the market is 40-50 a barrel, and the good one is about 200.

There are special anticorrosive wood oils, and those who sell anticorrosive wood are sold, and they can also be colored.

Wood wax oil is a combination of vegetable wax and vegetable oil. Vegetable oil can penetrate into the wood and deeply maintain the wood; Vegetable wax can protect the surface of the furniture, have a good gloss, traditional paint like a plastic sheet to seal the furniture, wood wax oil this perfect combination allows the furniture to breathe freely. ——Huibao wood wax oil.

Wood oil is fine, and wood wax is fine.

In contrast, wood oil and wood wax are kept for a short period of time (about one or two months. more suitable for indoor woodware).

Wooden gazebo, with the most traditional tung oil bar. (The retention time can reach one or two years).

For antiseptic wood, there is generally no need to brush wood oil or wood wax oil.

If I had to ask, I would choose wood oil. Wood wax oil is definitely useless at all.

Unless there is a case, it is "fake preservative wood".

Of course, it's good to use wood wax oil! Now Yi Zesi wood wax oil factory has developed anticorrosive wood wax oil for anticorrosive wood, which is weather-resistant and anti-corrosive, and has stronger anti-ultraviolet rays, which will play a good role in protecting your anticorrosive wood. The weather resistance of wood oil is not as good as that of wood wax oil, and it is almost half a year or a refurbishment.

Needless to say, it's good or bad, the choice is yours!! Huh

Generally wood oil. I don't know what the effect of wood wax oil is when I haven't touched it, but the effect of wood oil is very good.

1. When building, try to use long wooden boards, reduce joints, and leave 5-10mm gaps between the orange surfaces of the boards for beauty. All connection points of the anti-corrosion wooden house should be galvanized fasteners, or stainless steel and hardware, and prevent rust and loss of preservatives.

2. It should be stored in ventilation and avoid direct sunlight as much as possible. In the design and construction, the existing size of the full-width and anticorrosive wood materials should be as much as possible, and if it is necessary to cut and drill, etc., it must be remedied by brushing with the preservative of the Absolute Hall to ensure the integrity of the imitation anticorrosive layer. The hole should be pre-drilled when joining, which can reduce cracking.

3. The adhesive used should be waterproof and weather-resistant, and the surface of the anticorrosive wood must be treated with water-based anti-ultraviolet paint.

4. The most important thing is to choose the materials, so that the gazebo can be used outdoors for a longer time.

A look at the exterior of the gazebo. The high-quality gazebo is well-made, the carving is fine, and the pure hand-carved is not computer-engraved. Whether there is a gap in the connection and inlay. Whether it is a pillar or a guardrail, a table and a chair and other places that can be touched by the hand, there is no place for piercing.

Second, look at the selection of materials for the gazebo. Most of the high-quality pavilions are made of fragrant fir fir wood, and the wood grain is clear. Fragrant fir wood is known as "natural preservative wood in wood" benefits:

Natural log fragrance, the cedar alcohol contained in cedar wood can kill bacteria in the air, can inhibit human pathogenic bacteria, and has an inhibitory effect on various ** inflammation; It has a health care effect on the human body to eliminate fatigue and relieve stress! Compared to painted furniture, it is more environmentally friendly and has a special aroma. Fragrant fir wood contains "cedar brain", which can resist insects and rot.

In order to reduce costs, the inferior gazebo often uses loose wood, and the surface is not visible after treatment, so customers should consult carefully with the staff when choosing.

Third, look at the top of the gazebo. The top of the high-quality gazebo is a three-layer design, the inner layer is a layer of carbonized wood, the middle layer is a waterproof board, and the outer layer is a carbonized wood tile. The wiring of the lights in the pavilion is laid out before leaving the factory, and the four rice-shaped beams on the top of the pavilion gourd are slotted, and the gourd top has its own wires.

Fourth, look at the style size. The gazebo is roughly divided into four corners, hexagonal, octagonal, double-layered, three-layered, special-shaped and so on, it is recommended that consumers look at the style in advance when buying, measure the specific size, choose the appropriate style, it is recommended that it is best to lay the foundation, because the weight of the conventional gazebo is generally more than 400kg, considering whether the long-term contact force will cause the ground to deform and sink, so that the gazebo is uneven.

Fifth, look at the production process of the pavilion. At present, the gazebo sold on the market, the production process of the gazebo is different, under normal circumstances, the gazebo has gone through 39 processes such as drug soaking, high-temperature cooking, baking, anti-corrosion, and carbonization. Don't doubt it, it's not about the cooking techniques of the food, but about the craftsmanship behind the special texture of the furniture by a furniture shop owner who makes a gazebo made of carbonized wood.

Natural, environmentally friendly, safe, and more suitable for family use.

In summer, a comfortable pavilion chair, the seats sit around the coffee table, a few cups of tea are served, and a few elderly people can enjoy the shade leisurely.

Anticorrosive wood, as the name suggests, is the wood that has been preserved, and the anticorrosive wood promenade has banned the original use of cement and steel structure of the trellis gallery, and the promenade will not be dried and dried by the hot shelf of the sun, and the cold ones dare not sit in winter, and the hot ones dare not sit in summer. Therefore, antiseptic wood is the first choice for making flower trellis and gallery frames.

Gardens, communities, lawns, flower stands, small bridges and flowing water, small pavilions, seats, engineering land, generally used for outdoor.

Courtyard pavilions, gallery villas, and wooden pavilions are matched with the natural scenery, and the urban architecture is integrated with each other, with a more natural beauty.

Nowadays, in many communities and parks can see the figure of the anticorrosive wood pavilion, it is beautiful and generous, it is an environmentally friendly material, anticorrosive wood is a kind of wood with good anti-corrosion function, and it is also a type of wood that is more common in outdoor comparison now, about the production and manufacture of anticorrosive wood, the most important application is for the gazebo. It has anti-corrosion performance, ensuring that the gazebo is not eroded by rain and microorganisms in summer, and is a type of gazebo with good performance, so what do you need to pay attention to in the process of manufacturing: 1. Dry in strict accordance with the drying curve of the material.

2. Strictly follow the degreasing process and planing mechanically. Without degreasing treatment, the outflow of pine oil in the summer after installation will affect the appearance, pollute the environment, and more seriously, it will become a breakthrough for organic organisms to erode wood. 3. Preservatives with stable quality require special reaction axes and accurate configuration processes to fully solidify and stabilize with wood, and truly achieve antiseptic and healthy effects.

4. Use steel for airtight storage. 5. Strictly implement the full cell penetration process to fully ensure the permeability and solid content of the preservative to ensure the antiseptic effect. 6. Strictly follow the standard process concentration, and strictly implement the curing process at room temperature or medium temperature.

The service life of the anticorrosive wood gazebo can be very long-lasting, so many squares are used, and it also has many shapes, which is full of digging, which satisfies everyone's pursuit of fashion, and at the same time makes the overall environment more beautiful. However, when we produce specific products, we must deal with them in accordance with the relevant requirements to ensure the production of high-quality gazebos. 7. Because the anticorrosive wood contains anticorrosive potion, it does not need to be painted with tung oil, and varnish can be used to maintain the natural color of the wood and the natural body color; Or have special needs, paint wood oil and wood paint to enrich the landscape color.

Precautions for the production of anticorrosive wood gazebo: 1. Construction environment: In order to prevent the function and service life of anticorrosive wood from being affected, when manufacturing gazebo, it should be selected in the morning or dusk when the ventilation environment is better and the temperature is cooler.

2. Material selection: Although anticorrosive wood has outstanding anti-corrosion function, it is still necessary to pay attention to whether the material is cracked or deformed when selecting materials. 3. Request for careful protection of the construction environment:

Considering the cost of construction and the environmental protection of the environment, the waste of wide and wide materials should be prevented as much as possible in the production of anticorrosive wooden pavilions. 4. Beautiful request: Although the anticorrosive wood has outstanding anti-corrosion function, he is still in need of designers to design in terms of beauty, and the beauty of the anticorrosive wood pavilion should be displayed to the greatest extent during construction.