What should I do if the drain pipe of the balcony washing machine is too high?

You are suitable for washing machines with upper drain (drum washing machines), this kind of small wave wheel washing machine.

It's a little higher, you can cut it shorter and add a washing machine anti-odor outlet head or tee to solve it.

The drain pipe of the balcony is the sewer pipe of the original building, and when the decoration is tiled, a special floor drain for the washing machine should be installed, and the submarine floor drain should also be installed if the washing machine is not placed, and only the bottom of the basin can be left as it is.

Answer: 1. You can put the four bottom cushions under the washing machine to a suitable height. 2. You can also cut the fixed drainage pipe in the figure to a suitable drainage consistent height with a cutting machine.

This is the problem of the decoration company, and you should do it well when you make the balcony floor.

But now that it's like this, it's not a troublesome solution.

1. You can saw off a section of the plastic pipe, which is not difficult to saw, and you can buy a hand saw by yourself.

2. You can raise the washing machine. Buy a washing machine stand, or pad it with bricks.

3. If you want to buy a new washing machine, you can buy the kind with the upper drain.

The drain is too high.

Solution: Water can only drain properly when the outlet is lower than the washing machine, otherwise, water may accumulate.

What should I do if the drain pipe of the balcony washing machine is too high? The drain of the washing machine is too high, it could be shortened a bit.

Cut off two-thirds of it, buy a washing machine tripod and install it.

If the drain of the drum washing machine is not long enough, you can consider the following solutions:

1.Use a drain extension: Extend the length of the drain by purchasing a properly sized drain extension and attaching it to the end of the original drain. This is the easiest and most common workaround.

2.Install a drain extender: A drain extender can bend an existing drain pipe to include a length, which is suitable for situations where a larger length is required. They are usually retractable and can be adjusted as needed.

3.Move the washing machine location: If possible, try moving the washing machine closer to the drain to reduce the length of the drain. This may require a rearrangement of the room layout, but the use of extension tubes or extenders can be avoided.

4.Consult a professional: If you're not sure how to fix the problem or make changes to your drainage system, it's best to consult with a professional plumber or washing machine installer. They can provide specific advice and solutions to ensure that work is safe and effective.

5.Summary: If the drain pipe of the front-loading washing machine is not long enough, you can use a drain extension or drain extender to increase the length.

Also, consider moving the washing machine to reduce the length of the pipes, or consult a professional. Choose the right solution for your situation and make sure it is installed and adjusted in the right way to ensure the proper functioning of your drainage system.

This situation is very normal, Hui how sometimes your washing machine is likely to wash clothes, this time the drainage is particularly far from the drainage pipe, this situation can only find a way to the former yard, the first situation is to put a basin on the side, and then pour it after the water is full, the second situation is to say that you can buy a section, in fact, that kind of pipe can be purchased online, some time ago I bought more than two meters, it should be more than seven dollars or quite cheap, he is all in the joint with that, buy it back and connect it to use, this situation should be unreasonable in design, that is to say, there should be a sewer near the design of the washing machine, so that this situation will not occur.

The drum washing machine drain pipe is not long enough solution:

Use a ruler to measure the distance between the drain and the floor drain. After measuring the size, add about 20 cm to the measured value so that the inner tube can be inserted into the floor drain to prevent the odor from rising.

Use a ruler to measure the length of the bicycle inner tube and cut it with scissors for Heng's use.

Put one end of the cut inner tube on the washing machine drain and insert the other end into the floor drain. Such an extended washing machine drain pipe that is roughly barred and exempted from rock fees is completed.

The length of the washing machine drain pipe is generally.

There are several solutions to the lack of long drain pipes in the rolling down washing machine:

Replace the original drain by purchasing a drain pipe of sufficient length.

Cut a section of the inner tube of a waste bicycle, put it on the drain pipe of the washing machine, and insert the floor drain at the other end to make an extended drain pipe for free.

Clamp the drain pipe on the plastic card behind the washing machine to make it hail at least 70cm to prevent water from entering and exiting at the same time.

The sedan can be connected with a professional drainage pipe extension pipe, and the washing machine can be moved closer to the drainage outlet to close the pipe length to meet the requirements.

<> the drum washing machine drain pipe is so high because the drum washing machine is an upper drain washing machine, and the drainage is by the drain pump, and there is no drain valve to control the drainage. Without a drain valve, the drain system is equivalent to a pipe, which is straight, and if the drain pipe is not placed in a U-shape, then the machine will not be able to store water and the washing machine will not work.

This answer applies to most brands of washing machines such as Haier, Siemens, and Little Swan.

Mimi. The height of the drain pipe of the washing machine should be equal to or lower than the position height of the root of the machine discharge pipe, because there is a section of water pipe between the inner barrel of the washing machine and the external drain pipe in the lower part of the machine, and the position is the same as the height of the root of the external drain pipe.

You choose a washing machine with drainage, that is, a drum, there are no special requirements for the water pipe, as long as it is convenient, or slightly higher than the washing machine, the drum is generally 85 cm high, and it can be used for other purposes in the future. The drain pipe for the drum as long as it is not higher than 1 meter, if you want to lead to the bathroom, it is better to be slightly higher, a few centimeters off the ground, the balcony may be lower than the bathroom.

The machine drain pipe for upper drainage can be a little higher, twenty or thirty centimeters. The height of one meter of the inlet pipe is more appropriate.

300 off the ground, wipe the washing machine pipe directly inside and don't move.

The upper water pipe is better in meters, suitable for any style of washing machine. It can avoid changing to another washing machine that causes the washing machine to be too high to use.

Less than 10 cm above the ground, the lower the better. Suitable for any type of washing machine.

The drum washing machine does not have high requirements for drainage, and it should be a strong drain type, unlike other washing machines that have drop drainage.

Remember, it must be low. Happy decorating.

The sewer pipe of the balcony washing machine is of the floor drain type and has no height.

Because the drum washing machine is an upper drain washing machine, the drainage is controlled by the drain pump, and there is no drain valve to control the drainage. Without a drain valve, the drain system is equivalent to a pipe, which is straight, and if the drain pipe is not placed in an inverted U-shape, then the machine will not be able to store water and the washing machine will no longer work.

Therefore, the highest point of the inverted U-shaped drain pipe must be higher than the page when washing, and under normal circumstances, it will not cause siphoning if it is higher than the page.

The drum washing machine originated in Europe, and the washing method is designed to imitate the principle of beating clothes with a stick hammer. The drum washing machine is made of stainless steel inner barrel, mechanical program controller, phosphating, electrophoresis, spraying triple protection of the shell, and a number of bulky cement blocks to balance the huge centrifugal force generated when the drum rotates to do repetitive motion, plus the joint action of washing powder and water to make the clothes clean.

If it is a washing machine, it is best to build a table, and keep the countertop level, otherwise there will be a situation of shaking or displacement, do not use the foam of the original packaging, because the foam will cushion and click, resulting in failure to work.

If it is a drum washing machine, it was originally set to drain at a high level, and it needs to be drained at a high level, which is just right.