How to weave sandalwood bracelet knots, flat knot bracelet knitting

Auspicious knots all over the law**.

First, sandalwood is generally yellow-brown or dark brown, and after a long time, the color is slightly darker, the luster is good, and the pulp is not as obvious as red sandalwood or yellow pear. The texture is hard, delicate, smooth, and feels good, with an air-dry density of up to grams of cubic centimeters, a straight or slightly wavy texture, and obvious or inconspicuous growth rings. Second, the aroma is mellow, long-lasting, and not obvious for a long time, but scraped with a blade, the aroma is still strong, and the pungent fragrance of camphor and fragrant nan is slightly light and natural.

Some people use artificial flavors to soak or spray wood to pass off as sandalwood, and the fragrance is generally pronounced with a medicinal smell and is not persistent. Thirdly, the wood that is passed off as sandalwood. Some of the wood materials of the genus Sandalwood are not comparable to those of sandalwood from India and Indonesia.

Quality The best sandalwood is produced in India, followed by Indonesia. In general, in the international market, sandalwood is used in other woods or different families but similar in appearance to sandalwood, and there are also scented woods to pass off as sandalwood. Some manufacturers in China mostly use white basswood, cypress, yellow rue, birch, and Lu Junsong to remove color, dye, and then soak and spray with artificial flavors to pass off as sandalwood and make a large number of fans, Buddha statues, Buddhist beads and other carvings.

Auspicious knots all over the law**.

Hope it helps.

The flat knot bracelet is knitted as follows:

Tools: one 80 cm rope (axis), one two-meter rope (braided wire), two clips, one pair of scissors, one lighter.

1. Fold the 80 cm rope in half, leave 12 cm in half, and clamp it with a clip. The other end can be clamped directly. Then fold the two-meter rope in half to find the center point, which is placed under the axis.

Then bring the thread on the left to the right. Then thread the right thread from under the left thread to the hole on the left. As follows**, then pull the end of the wire and push it to the clip.

2. Bring the thread on the right to the left. Then put the left thread. Press on the right thread, and then be careful to pass under the axis, and wear auspicious thoughts from the circle on the right.

Then pull the wire taut and push it to the clip. The rest of the process is repeated, and the steps of steps 1 and 2 are kept doing this.

3. This is the effect of making up a paragraph**.

4. Before and after rolling to the required length. Cut off the end of the braided thread and burn it with a lighter.

5. Overlap the threads on both sides of the axis, tie the double flat knots to the required length, cut off the threads and burn them with a lighter.

6. Tie two threads on both sides of the axis and tie a dead knot together.

7. The following is the braided bracelet.

Bracelet greetings

Xingyue Bodhi: Although we don't often see each other, we have the same stars and moon, and we complain about our daily thoughts. Respect the time blank, pick a leaf Bodhi, and wish life a quiet and good life. Vajra Bodhi: The smoke and rain are alive, and the aura is just extraordinary. The past has been tempered, and the years are coming.

Cut the thread about the meter, weave a button knot, and leave a small number of holes as the buttonhole of the bracelet.

Next is the tutorial of button knots, and those who can do button knots can skip this step. I am a two-color thread that is sparked to make it easier for everyone to learn. Put the thread on your middle finger and press the blue wire on the right in a circle on the silver wire on the left, with the end of the blue line at the bottom.

Wrap the silver wire around from the bottom, pass through the silver wire in the blue coil, and adjust the line like a flower basket on the middle finger, also like a money knot, see the picture for details.

Wrap the blue line half a circle from the top, pass through the top line and pass through the middle hole, be sure to go around the top line and go down from the far left through the hole in the middle of the basket.

Wrap the silver wire half a circle from the bottom, go around the lower end of the line and pass through the middle hole. Be sure to go around the bottom line of the Divi pie and go through the hole in the middle of the basket through the far right.

After adjusting the thread, tighten it, and it will be a button knot.

Once you've braided the knots, compare them on your wrists to determine where the next knot will be. The line on the left is tied in a single knot, with the knot on the left and the end of the line on the bottom.

The line on the right passes through the coil on the left.

The line on the right is tied in a single knot, with the end of the line on top.

Pull it tight, adjust the shape, and a cross knot is ready.

Braided a piece of knot, compare it on the wrist to determine the position and length of the knot.

Next is the tutorial on knotting, which can be skipped. I use a two-color thread, the silver thread on the left is wrapped around and the end of the thread is on top.

The blue thread doubles through the silver coil and tightens the silver thread. Next, you have to pull and slide tightly every time to prevent the elasticity from being different and the bracelet is not looking good at different sizes.

Double the silver wire, put it into the blue coil, and pull the blue wire tight. Each time, a strand of wire is put into another coil, and the two wires are locked with each other, hence the name lock knot.

The next steps are all similar, put the blue wire into the silver coil and pull the silver wire tight.

Double the silver wire, put it into the blue coil, and pull the blue wire tight.

Once the length is appropriate, put a section of wire into another coil and tighten it.

After the lock knot is braided, make a cross knot, and finally make a button knot on the wrist in the right place. Finally, the excess thread is cut off and the tail is burned.

After the tail is burned with a lighter, it is OK. Let's take a look!

It is not easy to take pictures and code words, so ask for likes and encouragement

The teaching of knotting bracelet weaving** is as follows:

1. Select two favorite silk threads, and cut 4 60 cm long threads for each color, a total of 8 threads.

2. Arrange the silk threads of the two colors together and knot them at one end, leaving a section of about 8 cm on the head.

3. Fix one end of the knotted thin wire on the cardboard with tape or a small clip.

4. Divide the 8 silk threads into two equal strands, 4 on the left and 4 on the right. Each color is also distributed equally.

5. Braiding the silk threads on the left and right sides one by one, starting from the outermost (red) thread on the left. Wrap the thread around the remaining 3 threads on the left in turn, tie the knot and pull it to the top of the yarn harness.

6. Pull to the right side of a yarn, string it over, and pull it to the top.

7. Continue to wrap a piece of yarn until the outermost red yarn runs to the middle position. The first step on the left side of the yarn is finished.

8. Next, wrap the right yarn, first wrap the outermost yarn around the remaining 3 yarns in turn and tie the knot at the top. Tie each knot twice.

9. Wrap the outermost source of wool until the middle position, and tie a knot between the left and right wool slags. (Don't forget to tie each knot twice).

10. Then use the same method to tie the second yarn on the left and right sides. The next step is a bit special: pull up the second left yarn (blue) and wrap it around the outermost yarn (red) and tie it in a knot, tying it twice.

11. The same is true on the other side: pull up the second yarn (blue) on the left side and wrap it around the outermost yarn (red) and tie it twice.

12. Continue the same weaving steps to weave the 2nd and 3rd roots.

13. The left and right sides are knitted with the same steps, and a small heart shape is gradually revealed.

14. When weaving to the 4th row, add the special weaving method just now, wrap the second yarn around the outermost yarn and tie the knot.

15. The left and right sides are synchronized with the same arrangement.

<>16. The next step is to make two rows with the normal arrangement, and then use a special method to arrange two rows, and so on.

17. Finally, tie the knot at the end of the bracelet and trim the thread.

Here's how to weave a bracelet with a piece of rope:

1. First weave a 2 cm diamond knot, fold a rope in half and weave it, and the following picture is distinguished by different colors. Press the yellow rope to the red rope first.

2. Wrap it out from behind the red rope and leave a loop at this time.

3. The red rope passes through the loop left by the yellow rope from the front.

4. Tighten, repeat the above three steps to weave a diamond knot of about 2 cm, and then enclose the braided diamond knot into a circle.

5. Use a clip to clamp the buttonhole to facilitate the weaving of corn knots.

6. Divide a red rope into four parts, and divide the following picture into numbers to distinguish them.

Line 1, Line 3 Line 2, Line 4 Line 3, Line 4 Line 3, Line 4 passes through Line 1.

8. Repeat the above steps to a satisfactory length to tighten the braided bracelet.

9. Put beads on the end of the rope, tie the knot and burn it with a lighter to complete the weaving of the bracelet.

Prepare materials: rope.

1. First of all, we need to prepare two handmade ropes of different colors.

2. For the sake of beauty, the string should be the same color as the bracelet or the contrast color is better.

3. We tie a knot at the end of the overlapping bracelet to fix the bracelet in Kivuchi.

4. Divide this string into the left and right ends, the left string is placed under the orange destruction bracelet, and the right string is placed on the top of the bracelet on the contrary.

5. This completes the finishing touch of a simple beaded bracelet.

The Chinese knot is a hand-woven handicraft, and the sentiment and wisdom it shows are one of the aspects of the ancient civilization of the Han people. It was originally made of Paleolithic sewing and knotting, and then extended to the ritual records of the Han Dynasty, and then evolved into today's decorative craft Bo Li.