How to make a bracelet? How to weave homemade bracelets

I know if you think it looks good. No. 5 rope bracelet, chain length 17cm, requires rope 1 meter. The easiest way to weave a bracelet:

1.First fold the rope in half and twist it into a twist shape, braided a few snake knots and button knots in the middle, how many depend on your preferences and the length of the bracelet, and then twist a twist rope and the symmetry of the front, and finally weave a button knot end (burn the two threads together with a lighter, pay attention to the flames not to touch the line, use the heat of the fire to burn the thread, and finally put the thread into the knot, first put the beads on the rope and tie the knot, grasp the two ends of the rope to be closed together, and use a rope to wrap these two buckles like five or six knots, Then cut off the excess and burn it with a lighter...

I guess I didn't make it clear ... Teach people? You can go to a bracelet shop near your home and ask... Bookstores also have some corresponding books for sale... Because I've seen it in bookstores ... Six types of red strings for braiding bracelets. (e.g. **).

The required material is 25 gauge embroidery thread, and 6 embroidery threads are about 1 meter long. The first step in knitting a bracelet is to choose your favorite color, as shown in the picture above

A line red, B line orange, C line yellow, D line green, E line blue, F line pink. Put six red strings of different colors, arranged according to your favorite color, and glue them with transparent glue so that one end is fixed and cannot be moved. This is shown below.

The second step of the bracelet weaving begins: the first step of the bracelet weaving begins.

Bracelet knitting step 4: A and then re-wrap the B line for 1 time, and then tighten the second line.

Bracelet knitting step 5: Next, circle the A thread around the C thread 2 times, and then tighten the two threads. (The method is the same as Figure 3, Figure 4, Figure 5, Figure 6) Bracelet weaving step 6:

The A line is also circled twice with the D, E, and F lines in the same order. (The method is the same as Fig. 3, Fig. 4, Fig. 5, Fig. 6) Bracelet weaving step 7: Then, the B line is circled twice with the C, D, E, F and A lines.

The method is the same as in Figure 3, Figure 4, Figure 5, Figure 6).

Knit to the appropriate length, depending on the thickness of each person's wrist.

10 beads on each side. A small jade mound hangs in the middle. Tie a snake knot in the middle of the beads from bead to bead. Please refer to the method of how to tie the snake knot.

As follows:

1. First take a long enough bracelet line.

2. Fold this line in half and pinch the fold with your left hand.

3. Wrap one of the two wires pinched by your left hand around your left index finger.

4. Then remove the small circle and pinch it with your fingers.

5. Wrap another wire around the left index finger again, and after winding it from below, pass through the small circle that was wound for the first time.

6. Tighten the thread that was wound for the first time.

7. Continue to compile backwards using the same method as above.

8. As shown in the figure below, the bracelet is knitted to a certain length, and it can be placed around the neck to determine the desired length.

9. Take a beautiful bead and thread the bracelet through the bead.

The bracelet recipe is as follows:

Prepare materials: rope, scissors, thread.

1. Select a few strands of embroidery thread you like. Embroidery threads are thicker than regular sewing threads and have a wider variety of colors. A variety of colors can be chosen to create a stripe effect. The higher the number of strands, the wider and <> the bracelet

2. Measure the first strand. The length of the thread is slightly longer than the fingertips to the shoulders and then cut shorter.

3. Trim the remaining thread according to the strand that has been cut.

3. Trim the remaining thread according to the strand that has been cut. At least 3 strands of thread are required, generally the bracelet made of four to six strands is slimmer, and the bracelet made of eight to ten strands is a little stronger.

4. It is not necessary to choose a different color for each share, you can use a color many times to create a thick stripe of this color, 5. Pin the bracelet to the pants with a pin during the production process. Tie a square knot at the end of all the lines and fasten them. There are many ways to fix the bracelet, and you can choose the one that is convenient for you.

6. The most common method is to use a pin to pass through the knot and fix it on the trouser leg (on the thigh); Given the length of the bracelet, the pins should be positioned farther away so that the lines do not crawl on the body.

7. I like to leave more threads at the tip and tie them on the toes. As long as the body is flexible enough, the toes are still very convenient.

8. In order to make the bracelet more attractive, you can weave a few small twists before weaving the pattern.

9. Wrap the leftmost strand around the nearest strand on the right strand and tie the knot.

10. When tying the first strand, tighten the second strand.

11. Repeat the above weaving until the length of the bracelet is moderate.

12. If necessary, you can write a small twist.

13. You can also add some amulets or beads at the end.

The meaning of different bracelets is different, according to the material, style, number of bracelets, etc., the meaning is slightly different. A bracelet represents love at first sight, a single girl wears it for innocence, and a girl in love wears it for a lifetime with her Prince Charming, single-mindedly; Wearing two bracelets represents the joy of being in love, sweet love.

If a single girl wears two bracelets, it represents an affirmation of herself, a good life, a happy mood, and a comfortable time, but also shows a contented and happy personality; Three bracelets imply three lifetimes of love, three lives are fortunate, a "three" is a commitment to fate, express a beautiful long-cherished wish, cherish each other's fate, people in love wear the meaning "I love you".

The person wearing the four bracelets expresses a natural and honest personality and entrusts good wishes for the four seasons; The five bracelets represent a flamboyant personality and a life that is completely independent and unfettered; A person who suddenly wears seven bracelets is secretly liking someone and will hint at someone. These are the different meanings of wearing different bracelets.

Prepare the materials that need to be prepared first. 1. Prepare 6 threads and tie a knot together.

2. Pick up the two lines on both sides, wrap around the middle four lines, and use one of the two as the starting line to tie a neat knot.

3. After tightening slightly, tie a knot with the starting line from the other side.

4. Tie the knot 5 times in a row in this order.

5. After that, the most edge of the degree is oblique downward, and then all the lines are knotted around this line, and each line is tied twice in a row.

6. Then turn the line in the opposite direction, at an angle of about 90 degrees. Continue to tie the knot around this line.

7. Continue knitting in this order until it fits the length of your wrist.

8. When waiting for the end, repeat the third and fourth steps to tighten the knot of 5 finishes.

9. After the knotting is completed, tie several threads together to form a knot symmetry.

10. Cut a small piece of line, pull up the two ends of the bracelet like the middle, neatly, and continue to tie a few neat knots.

11. Weave to a suitable length, cut both sides short, and leave a small part.

12. Use a lighter to burn both sides and stick them up immediately.

13. After a little tidying up, a good-looking bracelet is completed.

There are 8 steps to make a bracelet. Tools Ingredients: clay, scissors, thread. 1. Pull out a small pinch of pink clay, knead it into the shape of a droplet, and cut out 5 petals.

2. Roll out the petals with a white stick.

3. The stamens are fixed on the flowers with white glue.

4. Cut off the excess part, pierce the hole, and dry it until the situation changes.

5. Squeeze out a small amount of red oil paint and color the petals with a brush.

6. According to the size of your bracelet, cut out the corresponding length of the elastic cord.

7. Wear peach blossoms, tighten and fix them, and then make bracelets.

8. Finally, use the chain to connect the ring and the bracelet.

Here's how:Prepare materials: two ropes, scissors.

1. Tie a rope into a knot.

2. After bending the other rope from the middle and threading it through the first rope knot, tighten it.

3. Then thread the knotted rope out in the following way.

4. Tighten it.

5. Wrap the left rope from above, and then wrap the right rope from above and thread it from below.

6. Then tighten it.

7. Use the above method to pass the rope on the right through the left.

8. Tighten it according to a certain arrangement interval and repeat the above operation.

9. Tie to a certain length and cut off the extra two.

10. Circle it two small circles first, and then follow the following steps to string forks.

11. Thread the right rope through the middle below.

12. Penetrate the left side in the same way.

13. Pull it into a small ball.

14. Cut off the excess part, and the good-looking bracelet will be successfully knitted.

The steps to make a bracelet are as follows:

1. Choose the appearance. If you need a more formal bracelet, you can make one that's perfect for cocktail dresses and evening downtown events. A simple string of round beads can be used to create a stylish, elegant look.

This will give your bracelet the effect of a pearl bracelet at a lower **.

2. Buy beads. Depending on your style and preference, look for any metal, pearl, or imitation pearl beads. They should be roughly the size of a pea. These should be simple. Try not to use more than three colors and make sure the colors you use are similar.

You may want to use beads of slightly different sizes, use them in random or semi-random mode to give your bracelet a small variation. You may also need to use very small beads to place between larger beads. They act as spacers to create a slightly different look while giving your bracelet some small changes.

3. Look for lines. Find the fishing line or thick line. If you don't want your bracelet to have a clasp, you can also use elastic threads.

These threads will be used to string the beads together. It is also possible to use ribbons to make a bow clasp, but this will depend on the size of your beads and the size of their center hole.

Measure the circumference of your wrist and adjust the length of the thread according to the right amount of tightness you want to achieve. You can also mark the length by measuring the other bracelets you have. Be sure to leave an extra port to add the last knot.

If you don't want a knot, you can choose to use elastic cords. Any unnecessary threads can be cut afterward.

4. Thread the beads onto the thread of your choice. Adjust them to your own feelings. Attach the knot you have chosen to use and follow the advice on the package. Trim off the extra thread and you're done!

1. Prepare 6 threads and tie a knot together.

<>7. Continue knitting in this order until it fits the length of your wrist.

<>11. Weave to a suitable length, cut both sides short, and leave a small part.

13. After a little tidying up, a good-looking bracelet is completed.