Is the foot bone crutch softer or smaller, and the greater the curvature value, the better? Or is sm

Of course, the deflection value is the smaller the better, the more dense the deflection value, the better the overall strength, the road is smooth, and the driving safety can also play a certain role, the larger the deflection value, the denseness of the soil is not enough, the strength is not high, and it is easy to cause damage and destruction of the road.

Road engineering capital construction refers to the process of converting certain building materials into fixed assets through construction and installation activities. Fixed assets refer to material materials that can be used for a long time and maintain the original material form unchanged during their use, such as roads, bridges, workshops, machinery and equipment and means of transportation.

Fixed assets are constantly depleted in long-term production and use, and the value of their losses is calculated through depreciation and installment in the cost of products or commodity circulation expenses. When the use value of a fixed asset has been exhausted and the end of its life is reached, it must be reinvested in the construction or purchase of new fixed assets to replace it.

Any new fixed asset to replace the old fixed asset to be scrapped without expanding the scale and capacity of production is called simple reproduction of fixed assets; If fixed assets are added on the original basis, it is called expanded reproduction of fixed assets.

The smaller the better, and theoretically 0 bends will never rut.

When a car overwhelms the road, the road will sink, we use the specified vehicle (weight, number of tires, tire inflation pressure) to press different roads, sinking (or the amount of rebound) will be different, and the instrument measures such a value, which is the deflection value.

The greater the deflection, the worse the quality.

I just remember that there was a ring on the index finger of my left hand, a silver-white ring, that had been clinging to my heart.

It depends on whether the method of exertion is right or not, just like exercise, some people will be athletic**, but some people will exercise more and more strongly.

Or don't rub it well to avoid getting worse. Sleepy.

You Wang Guanpei can be plastered with Yunnan Baiyao brand plaster, or you can buy it for internal use, and the swelling will disappear soon.

I've twisted my foot in the previous letter.

In the mechanics of materials, the angle dw dx

The shape of the hill formwork beam after bending and teasing is regarded as a plane curve without inflection point, that is, the slope of the corresponding point on the curve, it can be seen that the larger the deflection and the smaller the angle without considering the lead finger!

Of course, the smaller the better.

ms is the meaning of milliseconds, which is the unit of network delay, the smaller the value, the better, the smaller the value means that the user's network latency is low and the network is smooth, the larger the network delay is high, and the network speed is not good.

What you're talking about is internet speed.

Bandwidth or ping?

If it is the bandwidth (in m), the larger the better, such as 1m, 6m, 10m, etc., and 10m is the fastest among them.

If it is ping, the smaller the better, the unit is ms, such as 2ms, 10ms, 100ms, and 2ms is the fastest.

The higher the detection limit.

The lower, of course, the bigger it is, the more slippery it is.

According to the strength of the signal, it is OK to be moderate, too large is easy to absorb interference clutter, too small to induce the signal is weak.

Elongation has nothing to do with external force, it is the property of the material itself, only determined by the organizational state of the material itself, even if you do not add external force, the elongation of a material should still be more or less. You confuse the length of the elongation of the material with the elongation under the action of external forces, and the unit of elongation is the percentage cavity ratio.

The greater the deflection, the better the flexibility, but the large and small should also be combined with practical value.

It's good to be sure that it fits the application.

Welcome to adopt, thank you!

If the curvature is concerned, the smaller the better, so that it can ensure that her flexibility is not easy to break.

It depends on what you are for, to be flexible, the greater the deflection, the better, if used as a structural part, the less elasticity is better.

The less the deflection of the part, the better. The greater the deflection of the plastic part, the worse the quality and the easier it is to deform.

The smaller the better, the better the curvature, the better the plasticity of this plastic part, and the larger the plastic, the more brittle the plastic is, easy to crack and deform.

Deflection is the linear displacement of the axis of the member perpendicular to the axis or the linear displacement of the middle surface of the plate and shell in the direction perpendicular to the midsurface when the force or non-uniform temperature changes. The deflection is related to the magnitude of the load, the cross-sectional dimensions of the component, and the material physical properties of the component. There are many shortcomings in the direct measurement method, which requires pulling steel wires or erecting frames at various measurement points, so direct measurement cannot be carried out when there is water under the bridge; For cross-line bridges, this method cannot be used due to the influence of railway or highway traffic limits; High bridges crossing canyons, etc., cannot be measured by direct methods; In addition, the direct method of deflection measurement is more complicated and time-consuming, whether it is to lay out or cancel the instrument.

The greater the deflection of the plastic, the better, and the greater the deflection of the plastic, the higher the value.

Bigger is better. The bigger it is, the more soft it is, and the better its elasticity. The better the quality.

In simple terms, the flexural modulus determines the bending resistance of the object, and the smaller the value, the easier it is to bend the part.

However, deformation not only includes bending, but also stretching, contraction, twisting, etc., and cannot be generalized.

I think the greater the curvature of the shrinking circle, the better, the greater the curvature, the stronger, stronger and more elastic, it will be more durable, and vice versa, it will be easy to break.

This is not the bigger the better, or the smaller the better, there is a safety, generally the actual use does not exceed 20mm

Is it better to have more deflection or smaller deflection of the part? Why?

It still depends on where it is used.

It's not good if the plastic is too hard, it's not good if it's too soft, you should travel far, and moderate is better.

I see that the curvature is bigger, or the smaller it is, I think it's not good, moderate is better.

This kind of piece is still better with a small bending.

This shouldn't be so simple to distinguish between good and bad, it should be distinguished according to needs.

And each product has different requirements for flexure.

The plastic pallets on the shelves must first be able to adapt to the load capacity and forklift forklift, and cannot be put on the shelves because the load on the shelves does not meet the requirements, and if they are placed on the shelves, they will be deformed and broken, and there is plastic.