What should I do if I want to treat the top paint of the wall?

The putty should be re-scraped to get a good treatment, and some better brands should be used. You should also buy some eco-friendly paint, so that it will not be particularly pungent, and scrape the wall surface before applying.

The putty must be scraped again, and it needs to be re-sanded, and then brushed with latex paint, you can get a good treatment, and it will not peel in the later stage.

First of all, some gaps should be filled with foam glue, and then some super glue should be used, and after the edge is sealed, you can scrape the putty.

1. Wet the original wall first, and then use cement mortar to plaster and level the top surface of the wall, the general thickness can not be too thick, about 15 cm is more reasonable. 2. After drying, use a roller brush to brush the putty to the top of the wall, brush a thin layer first, and then re-brush twice and wait for air drying. 3. Paste fiberglass mesh cloth on the top of the wall to prevent the wall from cracking, and take partial or comprehensive pasting according to the needs of the owner.

4. Finally, paint the top surface of the wall, and apply it evenly.

1. When brushing putty on the wall, the first time should not be too thick, it is more reasonable to brush a thin layer, about two millimeters, to prevent the wall from cracking, and then paint again, smooth the uneven place, and finally wait for the air to dry, and then proceed to the next step.

2. The putty on the wall should match the performance of the outer coating, so as to ensure that the two can be completely bonded after painting, and the firmness will be better, and it is less likely to peel and crack.

3. When brushing the putty after brushing the paint, the stirring of the paint must be uniform, and the material should be selected with good waterproofness.

Clean the wall Repair the wall Scrape putty Brush the first latex paint (primer) Brush the second latex paint (topcoat) Brush the third latex paint (topcoat).

Step Method.

Clean the wall: Remove the peeling and loose parts of the wall, and use cement mortar to repair it, shovel the residual ash clean, and then sweep the wall.

Scraping putty: the number of times of scraping putty can be determined by the flatness of the wall, generally three times, polyvinyl acetate emulsion for kitchen, toilet and bathroom: cement: water = 1:5:1 water-resistant putty.

Brush the latex paint for the first time:

The painting sequence is to paint the top plate first and then the wall, and the wall is up and then down. After drying, the putty is replenished, and then dried and polished with sandpaper and cleaned.

Brush the latex paint a second time:

The operation requirements are the same as the first time, fully stir before use, if it is not very thick, it is not appropriate to add water to prevent penetration. After the paint film is dried, use fine sandpaper to polish off the small bumps on the wall and the brush bristles, and clean them after grinding them smooth.

Brush the latex paint for the third time:

The method is the same as the second latex paint. Due to the rapid drying of the latex paint film, it should be operated continuously and quickly, starting from one end and gradually brushing to the other end, and the upper and lower brushes should be connected with each other, and the latter row of pens should be followed by the previous row of pens to avoid the appearance of dry rear joints.

I heard that it should be a person who decorates the nest, the nest is strong, I haven't heard of it, there are currently a few slightly better paint brands that are strong, it's best to find them, so that if there is any problem in the moment, you can find them responsible, it's best not to buy things from one east to the west, so that they end up most of you push me, I return you, no one cares. Whose paint do you buy ask them to buy these things, it seems that Nippon, Dulux, China Resources, and Carberry all have these, I don't know if your dealers there have purchased them.

Colorful seaside - the process is correct, most workers know how to do it, but it is best to follow the common methods of your local workers, so that they can do better, and it is better to use his method or you can directly find someone who can do this work

Remove the original aging paint layer. Brush with another layer of construction glue. Then scrape the putty and flatten.

Look at what is the base layer of the wall of your house, is it rough or does it already have a bottom layer?

Paint on roofs and walls can fade or peel off over time. In order to protect the surfaces of walls and roofs, repainting is required. However, the walls and roof must be cleaned before repainting.

1.Clean walls and roofs.

Dust, dirt and old paint must be removed from the walls and roof first. Use high-pressure water or a hand-brushed sail brochure to wash the surface, remove old paint or patent leather and remove any remaining parts of the paint.

2.Repair the damaged part.

If there are cracks or other damage to the walls or roof, they must be repaired before they are repainted. Use a filler or brickwork toner to repair the damaged part and smooth the surface.

3.Choose the right paint.

It's important to choose the right paint for your walls and roof. For roofing, choose paints that are weather-resistant and reflect the sun's rays to reduce your home's cooling bills. For the wall, choose a paint with bright colors and good durability.

4.Start painting.

Before you start painting, apply a layer of edge banding paint to the edges of the walls and roof to avoid paint spillage. Before you start painting, you can apply a layer of primer with a paint roller to improve paint adhesion and protect the surface. When applying paint, pay attention to horizontal brushing to avoid brush marks.

5.Apply a second coat of lacquer.

After applying the first coat of lacquer, wait for about 12 to 24 hours to dry before applying the second coat. Apply the primer again, then apply a second coat in the same way.

Summary. Repainting not only improves the appearance of the house, but also protects the structure and increases its value. Once you've completed the cleaning and painting steps, you can enjoy a whole new living experience.

Before painting, the wall needs to be treated with some necessary treatment to ensure that the paint can be adhered normally and the coating is uniform and beautiful. Here are the steps you need to take to treat the wall when you paint it:

1.Clean the wall: Use a cloth or vacuum cleaner to remove dirt and dirt from the wall, and make sure the wall is clean and smooth.

2.Sanding the wall: Use a sander or sandpaper to smooth the surface of the wall to remove unevenness and aging of the coating.

3.Fill the damage: For the damaged or cracked parts, use caulk to fill in the wall surface so that the surface of the wall is flat and smooth.

4.Joint treatment: For newly renovated walls, joint treatment is required. Use a primer to seal the gaps in the wall to prevent the penetration of paint and enhance the adsorption.

5.Determine the type and color: Choose the right paint type and color according to your needs. In general, bedrooms and living rooms need warm and comfortable colors, while kitchens and bathrooms need to choose water-resistant and wear-resistant coatings.

6.Apply primer: Apply an even layer to the wall using an appropriate primer. Primers enhance the adhesion of the paint film while masking the base color and improving coverage.

7.Coating: After the primer has dried, the coating is applied.

It is necessary to pay attention to the uniformity and continuity of the coating to avoid multiple overlapping brushes and the formation of dripping. It is best to leave plenty of time to dry before application and between adjacent coats to ensure that the coating is dry, hardened, and fixed.

In short, before painting, be sure to treat the wall carefully to ensure the painting effect and durability. At the same time, choosing the right paint brand and color, and preparing for painting, can not only make the wall beautiful and durable, but also make the living room more warm and comfortable.