Specification and function of the maintenance port of the street lamp pole

The access port of the street lamp pole refers to an opening set on the street lamp pole, which is used to facilitate the maintenance personnel to overhaul and maintain the street lamp. The following is an introduction to the specification for the production of street lamp pole access and its function.

First of all, the production specification of the maintenance port of the street lamp pole includes the following aspects:

1.Size specification: The size of the access port should be designed according to the actual needs, and it is generally required to be able to accommodate maintenance personnel to enter and operate. Generally, the height of the access port should not be less than meters, and the width should not be less than meters, so as to ensure the safety and convenience of maintenance personnel.

2.Material requirements: The material of the access port should have sufficient strength and durability to withstand the influence of the external environment. Common materials include steel plates, aluminum alloys, etc., and their thickness should be selected according to actual needs.

3.Design requirements: The design of the access port should take into account the operation needs of maintenance personnel, and it is generally required to be able to be easily opened and closed. At the same time, waterproof, dustproof and other functions should also be taken into account to protect the normal operation of street lighting equipment.

Secondly, the role of the street lamp pole maintenance port is mainly in the following aspects:

1.Convenient maintenance: The setting of the maintenance port of the street lamp pole can facilitate the maintenance personnel to enter the inside of the lamp pole for overhaul and maintenance work. Maintenance personnel can enter the inside of the lamp pole through the maintenance port, which is more convenient to replace lamps and lanterns, line maintenance and other work, and improve maintenance efficiency.

2.Protective equipment: The design of the access port of the street lamp pole can effectively protect the street lighting equipment from the external environment. Through the setting of the access port, it can prevent dust and moisture from entering the inside of the light pole, reducing the damage and failure of the equipment.

3.Improved safety: The setting of the access port of the street lamp pole can improve the safety of maintenance personnel. Maintenance personnel can enter the inside of the light pole through the access port, without the need to climb the light pole, which reduces the risk factors in the work and reduces the work risk.

To sum up, the production specification and function of the maintenance port of the street lamp pole are of great significance for the normal operation and maintenance of the street lamp. Through reasonable design and production, it can facilitate maintenance personnel to carry out maintenance work, protect equipment from damage, improve work safety, and ensure the normal operation of street lighting equipment.

The function is to facilitate the maintenance of wiring.

Question 1:

Solution 1: If there is no threading well, then the light will not be too high, you can put the light pole down and lead out the cable through the broken wiring.

Solution 2: If it is a light pole above 8 meters, there will be a wiring well, then you can pump the cable back into the wiring well, make a joint in the wiring well and thread a small wire into the light pole.

Problem 2: At least one meter of margin should be left for wiring of embedded cables.

1.After connecting it on the outside (make an intermediate joint), thread it in.

2.At least 50cm, it is most convenient to crimp copper pipes on the ground.

A copper-core cable can be used as a grounding wire to connect the lamp pole and the grounding grid, but because the cable is sheath-insulation, it cannot be used as a grounding body and grounding grid to reduce grounding resistance.

Maintenance and repair of street light poles:

1. Standardize operating procedures and strictly prohibit illegal operations.

2. Maintenance and replacement of high-pole lamps.

1. In the process of retracting and releasing the wire rope, on the other hand, check the appearance of the wire rope, and on the other hand, pay attention to whether the wire rope has overlapping, strands, rust, broken strands and serious stress. Check whether the individual sliding parts are flexible and reliable.

2. Replace damaged light source appliances, cables, etc., and check whether all fixing bolts are loose, firm, safe and reliable, whether the positioning pins and automatic hooks are flexible and reliable, etc., and should be replaced if the rust is serious.

3. The transmission mechanism such as the motor and gearbox fixed at the bottom of the lamp pole should be closed and covered as much as possible, so as to prevent the insulation damage caused by moisture in the protective ring, check whether the oil in the gearbox is sufficient, and whether the oil is black or has impurities. The movable motor transmission mechanism should be placed in a dry place, and its insulation resistance (not less than 1m) should be tested by a shake meter before operation.

4. The AC contactor, thermal relay, travel switch, command controller and other control appliances in the control circuit of the high pole lamp should be carefully and carefully inspected before operation, and the electrical components found to be problematic should be replaced as soon as possible, and it is strictly forbidden to operate with illness.

5. The grounding protection device and lightning protection device of the high-pole lighting facilities must be routinely inspected before the rainy season every year, and the grounding resistance should be tested and dealt with in time if the grounding resistance value (should be less than 10).

6. The above maintenance contents must be recorded in the establishment of a ledger.

After the maintenance work is completed, the electrical part of the high-pole lighting facilities and the lifting transmission mechanism should be fully inspected again to confirm that they are correct, and then the rising lamp panel can be directly hooked and unloaded before leaving the scene.