Can that computer whiz tell me what could be the reason 25

It's hard to judge without reinstalling the system! There are many, many reasons that will lead to the above problems, your situation, the network card problem is the majority, you can remove the network card to try, if the card is returned, reinstall the system (because there are viruses, Trojan programs, etc., anti-virus can not be completely solved, and reinstallation after the format is drawn can solve the problem most thoroughly).

Look at how much CPU is used, if it is used at 100%, then there may be a problem with the system. The suggestion is to reload.

There are many reasons why you might be in this situation, and it's not clear what other configurations you provide, such as the operating system, motherboard, and so on.

1. Your memory configuration is very high, it should not be a memory problem;

2. The L2 cache of the Celeron processor is smaller, and the support for games is not very good, and the TNT2 graphics card has better support for games than GeForce;

3. CS According to my personal operation experience, although there are certain requirements for the graphics card, it is not very high, even the integrated graphics card will not encounter the situation you said, so it is necessary to consider whether the computer is poisoned;

4. The hardware may be incompatible, for example, you can install the correct driver for the graphics card;

5. The operating system is also a problem, and it can be optimized appropriately with optimization software;

In terms of hardware, the temperature may be high and the heat dissipation difference may cause the whole machine to run slowly, and in the software, it is likely that it is a virus, resulting in a large amount of system resources being occupied.

Your configuration is high, if not for poor compatibility, it could be the following issue:

1 Anti-virus software problem, (do you have more than one anti-virus software installed).

2 The system is unstable, it is recommended to reinstall the system.

The best solution is to reinstall the system and install the drivers as required.

The biggest reason is that you are poisoned.

Playing those games according to your configuration should be smooth.

It should be a problem with the graphics card, is your graphics card 64 64mb 128bit or 64mb 64bit? If it is the latter, it should be a performance problem of the graphics card, or it may be that the video memory is too small; In the case of the former, it may be that the graphics card does not have good heat dissipation.

Hard disk! It may be that there is a problem with the L2 cache of the hard disk, such as after the DM is formatted

Failure analysis. Hardware:

Generally speaking, the possibility of memory problems is not large, the main aspects are: the memory module is broken, the memory quality is problematic, and there are 2 different brands of memory with different capacities mixed, which is also more prone to incompatibility, and it is also necessary to pay attention to heat dissipation problems, especially after overclocking. You can use memtest

This software will check the memory, and it can thoroughly detect the stability of the memory.

If this problem occurs when you have dual memory, and you are mixing different brands of memory modules or buying second-hand memory, you should check whether there is a problem with the memory or that the noisy and other hardware are incompatible.

Software: Let's briefly talk about the principle: there is a place in the memory called a buffer where the data is stored, and when the program puts the data in one of its positions, because there is not enough space to type it, overflow will occur.

For example: a bucket can only hold one pound of water, and when two pounds of water enter, it will overflow. And the system is represented on the screen.

This problem often appears on Windows 2000 and XP systems, Windows

The 2000 XP is very demanding on the hardware, once it encounters a resource deadlock, overflow, or similar to Windows

98 illegal operations, in order to maintain the stability of the system, the above situation will occur. It can also be caused by poor compatibility between hardware devices.

Hard Disk Detection Failed:

1) SATA wire is not of good quality or is not well plugged in.

Solution: Change the SATA cable or plug the SATA cable into another SATA slot on the motherboard.

2) The hard drive is faulty and may need to be replaced.

3) The BIOS setting is wrong, go to the BIOS to find the BOOT option, and check whether the hard disk is blocked.

4) Try to set the hard disk to boot (whether it is set incorrectly).

Analyze the reason: Hello, friend! Judging from the **000000001a of the blue screen above, there may be two reasons:

The first reason: the memory or graphics card cheat is oxidized, resulting in poor contact between the memory and the memory slot, and the poor contact between the graphics card and the graphics card slot, resulting in hardware incompatibility, and the resulting blue screen phenomenon is accompanied by errors**.

Solution: You can turn off the power first, open the compartment, dial out the memory, use the eraser against the part of the gold finger (that is, the place where there is a copper sheet,) wipe back and forth a few times, and then change a memory slot to insert it back, it's OK, if there is an independent graphics card, you can also use the same method to deal with the graphics card, just don't change the slot, it's OK, if possible, it's best to put the computer's motherboard button battery down, that is to say, remove the button battery for a minute, and then install it back, This saves you from doing the above and makes your computer more stable. Then set the optical drive or hard disk as the startup item,Turn off the software drive,It's OK,The second reason:It's your system poisoned,It will also be the same**,So Jianyi one-click restore or reinstall the system,After the system is done,Install antivirus software,Full antivirus。

Either the IDE compatibility mode is not turned on, please change the hard disk mode to IDE compatibility mode in the BIOS, the specific operation is to press F1 (different brands of machine buttons are different) to enter the BIOS when booting up, enter the configuration, and then set the SATA mode to compatibility (compatibility mode) in SATA, the default is AHCI mode (advanced master interface).

Either the system files are corrupted.

Either your computer's memory module is loose (or burned), open the case and take it out and install it, and check for odors.