What kind of interface is the BenQ S6 hard drive, and what is the socket of the BenQ s6 hard drive

I don't know if you're talking about this or not, if yes then take a look, model mid s6 hit the market in 2009.

Processor: Intel Atom Z500 800MHz Processor Type: Intel Atom (Atom).

The processor is clocked at up to 800MHz

L2 cache 512KB L2

System bus 400MHz

Storage device memory capacity.

Memory type DDR2

Hard drive type: SSD, solid state drive.

Hard disk capacity 8GB

Display screen size inches.

Speakers Built-in speakers.

Communication: 3G Internet access function None.

Wireless communication: wireless network card, Bluetooth.

Input/output mouse replacement device touchpad.

Card reader SD

Other interfaces RJ45, sound input, sound output port, DC power jack, safety lock hole structure features Weight Approx. 370g

Size 158 90 22mm

Power Specification Battery type 1880mAh

Other operating systems Windows XP Home

Do you want to change the hard drive or do you want to do something?

This hard drive is an SSD (which SSD type).

IDE and SATA interfaces. The full name of IDE in English is "IntegratedDrive".

electronics", that is, "electronic integrated drive", it originally refers to the hard disk drive that integrates the "hard disk controller" and the "disk body". SATA is serial

An abbreviation for ATA, i.e. Serial ATA.

Interface. SATA interface is the interface with the largest number of users, and SATA interface has strong error correction ability and simple interface, so the number of users is relatively large.

Interface, in fact, IDE represents the type of hard disk, which has been eliminated in the changes of the times.

Interface, SCSI interface hard disk is not used for ordinary PCs, and is widely used for high-speed data transmission on small machines.

4.The Fibre Channel hard drive interface, specifically designed for networking, has only begun to be applied to hard disks as the operating system demands the speed of hard disks.

interface, which is primarily designed to improve the performance of the storage operating system, provide availability and scalability, and compatibility with serial ATA hard drives.

Interface is a new generation of interface standard tailored for ultrabooks, and the hard disk interface with extremely fast transfer speed has gradually become the mainstream.

The above are the types of hard disk interfaces.

At present, there are two kinds of hard disks on the market, IDE port (parallel port) and SATA port (serial port), and the read and write speed of SATA port is higher than that of IDE port.

2 kinds; Personally, I think Seagate is the best.

There are two types, one parallel port and one serial port, and the serial port is better.

Two types: IDEs

SATA you open the case of your computer.

See what the cable on your hard drive looks like.

If your computer is connected to the motherboard, the cable is that wide.

The thread is removed. There are a lot of small pins on the hard disk interface.

Then your computer is a parallel port of hard disk, if you want to change the hard disk, you can say to the person who sells the hard disk to be parallel, if your computer is connected to the motherboard, the data cable is the same as a thin strip, the wire is removed from the hard disk interface like a small memory plug, that is the serial port, also called SATA port, then the person who sells the hard disk says to the serial port hard disk.

Now, there are generally two kinds, one is the IDE port, which is the kind that uses the cable, and the other is SATA, that is, the serial port, which is connected with a red data cable.

Now look at the new motherboard to support the mechanical hard disk has only one interface, that is, SATA interface. In the case of solid-state situations, low-end motherboards support SATA interfaces. The mid-range generally supports SATA

Interface. High-end motherboards can support SATA

interface.

Hello! ide sata scsi sas

The first two are mainly used on personal computers, the IDE interface is rarely used now, but the old computers are still used, and the latter two are mainly used on servers.

There are two types, one wide one is called parallel port and the other narrow one is called serial port.

Sata, IDE, I know both. There seems to be something else.

IDE and EIDE interface: IDE (Integrated Drive Electronics) actually refers to the hard disk drive that integrates the controller with the disk, we often say IDE interface, also called ATA (Advanced Technology Attachment) interface, most of the hard disks used by PCs are IDE compatible, Just connect them with the motherboard or interface card with a single cable. The integration of the drive with the controller reduces the number and length of cables in the hard drive interface, enhances the reliability of data transmission, and makes it easier to manufacture the hard drive, because manufacturers no longer need to worry about whether their hard drive is compatible with controllers from other manufacturers, and the hard drive is more convenient for users to install.

ATA-1 (IDE): ATA is the official name of the earliest IDE standard, and the IDE actually refers to the hard drive itself connected to the hard disk interface. ATA has a socket on the motherboard, supports a master and a slave device, the maximum capacity of each device is 504MB, ATA supported the PIO-0 mode (programmed I O-0) only, and ATA-1 stipulates a total of 3 PIO modes and 4 DMA modes (not used in practice), to upgrade to ATA-2, you need to install an EIDE adapter card.

ATA-2 (EIDE Enhanced IDE Fast ATA): This is an extension of ATA-1, which adds 2 PIO and 2 DMA modes to increase the maximum transfer rate, and introduces the LBA address translation method, breaking through the inherent 504MB limit of the old BIOS, and supporting up to the highest HDD. If your computer supports ATA-2, you can find the settings (LBA, LogicalBlock Address) or (CHS, Cylinder, Head, Sector) in the CMOS settings.

The two sockets can be connected to a master and a slave setup, respectively, so that four devices can be supported, and the two sockets are also divided into master and slave sockets. It is often possible to place the fastest hard drives and CD-ROMs on the main socket and the less important devices on the slave socket, which is necessary for 486 and earlier Pentium computers, so that the main socket is connected to the fast PCI bus and the slave socket is connected to the slower ISA bus. I won't talk about it earlier.

The most common ones are IDEs, also known as parallel ports. It has now been eliminated. The IDE interface is easy to distinguish.

The data line is wide. There are about 2 finger wide SATA interfaces that are now mainstream. It is also called serial port.

Bi-IDE is fast. The data cable is small. It's the size of a little finger.

SCSI is the fastest. One of the most convenient interfaces. However, because the related accessories are too high.

This makes this interface only available on the server.

IDE old wide line sata new thin line.