The computer cannot access the operating system, error number C0000135 60

Memory issues. There was an error in the memory.

You go to the computer company and ask him to do it for you, they know. What to do if there is a memory problem. You should never disassemble the laptop yourself. It cannot be ruled out that the memory error is caused by system poisoning.

I highly recommend that you go to a computer company and they will do it for you, if you do it yourself, you will have a lot of trouble, unless you are a very good person.

The landlord's problem could be a hardware issue, or a driver error. The landlord can reboot and press F8 to enter the boot option, and select the system boot log to start. Then restart after the same error, enter safe mode, find the system boot log in the root directory of the C drive, the name of the faulty driver is written after fail, uninstall the faulty hardware driver, and then reinstall the driver.

The computer will have a blue screen phenomenon during the boot process, and sometimes it will show the C0000135 error:

Causes of the problem:

1. It may be that some patches in Windows XP Service Pack 2 are incompatible;

2. Caused by the loss of files from some Windows recording hardware;

3. It is also possible that the memory is loose and the contact is not good, or the blue screen is caused by the poor contact of the heat dissipation chip on the motherboard, etc.

Solution: 1. Restart first;

2. If it can't start normally, you can turn on the computer and press the F8 key to select "Last correct configuration";

3. If it doesn't work, then it's ready to reinstall the system, and if the installation system doesn't work, the hard disk has a problem, but this possibility is relatively small, and it is basically caused by system failure.

Suggestion: In the future, try to avoid abnormal shutdown to reduce the loss of important files. For example, DLLs

vxd files, etc.

The blue screen stop:C0000135 unknown hard error is caused by some patches in Windows XP Service Pack 2 that are incompatible, or some Windows record hardware files are missing. It is also possible that the memory is loose and the contact is not good, or the heat dissipation chip on the motherboard is not in good contact.

Error analysis: It is generally caused by an error in the disk, sometimes it is also recommended to check whether the hard disk connection is not in good contact, or does not use a cable that meets the transmission specifications of the hard disk, for example, the ATA-100 still uses the ATA-33 cable, which does not matter to the low-speed hard disk, but tells the hard disk (supports ATA-66 or above) The requirements are stricter, and the connection with the wrong specification will sometimes cause this kind of failure to boot. If this error still occurs frequently after repair, it is likely to be a precursor to hard drive corruption.

Solution: In general, a reboot will resolve the issue, and it is recommended to do so anyway"chkdsk /r"command to check the repaired hard drive.

Hope it can help you: There are several possibilities: [Poor heat dissipation] The monitor, power supply and CPU generate a lot of heat during work, so it is very important to maintain good ventilation, if the monitor is overheated, it will lead to color, image distortion and even shorten the life of the monitor.

Working too long can also cause the power supply or monitor to dissipate heat poorly, causing the computer to crash. CPU heat dissipation is an important issue related to the stability of computer operation, and it is also the "hardest hit area" where heat dissipation failures occur. Improper movement] In the process of computer movement, it is often loosened by a large vibration that the internal components of the machine will be loosened, resulting in poor contact and computer crash, so violent vibration should be avoided when moving the computer.

Dust Killer] Too much dust inside the machine can also cause crashes. If the floppy drive head or optical drive laser head is contaminated with too much dust, it will lead to reading and writing errors, which will seriously cause the computer to crash. [Device mismatch] If the main frequency of the motherboard and the CPU clock do not match, if the external frequency is set too high when the old motherboard is overclocked, the stability of the operation may not be guaranteed, resulting in frequent crashes.

There are many reasons for the occurrence of **, one is that the virus damages the system file, the second is whether the memory is plugged in well, and the third is the system boot file corruption.

If it is two memory, please try it in a single channel.