What are the core technologies of Tianneng new energy batteries?

The core technology is battery, parallel technology, this technology is very advanced, and it is widely used in the United States to pull electric vehicles.

It depends on the specific situation, under normal circumstances, the clean energy it uses is better in this regard, and its endurance is also very good, so the choice of temporary position in this regard.

What are the core technologies of Tianneng's new energy batteries? In fact, this kind of technology is a patented product of others, so it is impossible to publish it easily, only the self-developed one is still very aware of the reliability.

As one of the top ten enterprises in China's battery industry, Tianneng Group has taken the lead in leading the core technology innovation of power batteries for new energy vehicles in China. From.

The core technology of Tianneng new energy battery is mainly for the mastery of new energy and the transformation of battery efficiency.

New advances in the fields of solar energy, hydrogen energy, nuclear energy, biomass energy, chemical energy, wind energy, marine energy and geothermal energy have supplemented the preparation of polycrystalline silicon solar cells and polycrystalline silicon materials, polymer solar cells, dye-sensitized solar cells, rooftop plans and grid-connected power generation technologies.

The core technology of Tianneng new energy battery is not passed on, and only the technical personnel of Tianneng Company know this.

The main thing is that the battery of this new energy has a larger capacity, and it also supports fast charging and is more lightweight.

Tianneng new energy battery, it is the use of a lot of new technology, graphene technology.

The core technology of Tianneng New Energy battery is his chip.

The core technology of Tianneng new energy battery should be the full use of graphene.

There are more detailed descriptions of energy batteries and new technologies on the Internet.

The core technology of the new energy battery is also very secretive, and some alloy technologies are not known outside.

The core technology of Tianneng new energy battery is the amount of storage of the battery and the degree of its attenuation.

What are the core technologies of Tianlong new energy batteries, and some of the core technologies of their manufacturers. You can't go here.

What are the core technologies of Tianneng new energy batteries, I think the core technologies. One is the battery. 200,000 off.

Chen Longji Energy's cemented carbide coefficient should still have many certificates, and it should be a secret of one of their companies, and there should be no way to do this.

The core technology of Tianneng new energy battery is the development of nuclear energy.

In the case of Tianneng New Energy, what are the core technologies of batteries, there are many topics for new energy.

Tianneng new energy battery has stable performance and durable battery.

The quality of Tianneng new energy batteries is stable, thanks to his production model, more than 90% of Tianneng batteries are self-produced, Tianneng has 16 major production bases in the country, and the level of automation is very high, which also ensures the consistency and stability of the product. Tianneng new energy battery will also perfectly integrate black gold with the battery, increase the durability of the power battery, extend the service life, and solve the industry pain points of the previous battery that is not durable, easy to bulge, and afraid of low temperature, and in order to remind consumers to choose a black gold battery with real materials, the product will be named a real black gold battery. The quality of Tianneng battery is still quite good, Tianneng battery self-discharge rate is very low, the advantages of large discharge current, some batteries have a narrow operating temperature range, battery water loss and thermal runaway defects.

However, Tianneng battery type does not have this situation, it has the advantages of stable performance, wide operating temperature range, resistance to overcharge and overdischarge, and long life. The environment with too high temperature will increase the internal pressure of the battery and make the pressure limiting valve of the Tianneng battery forced to open automatically, resulting in an increase in the water loss of the battery, and excessive water loss of the Tianneng battery will inevitably lead to a decline in battery activity, accelerate the softening of the plate, and fatal injuries such as heating, bulging and deformation of the shell during charging.

Three categories of new energy vehicle batteries:

1. The first is NCM ternary lithium battery (on behalf of the manufacturer "CATL").

2. The second is NCA ternary lithium battery (on behalf of the manufacturer "Panasonic").

3. The third and last type is lithium iron phosphate battery (on behalf of the manufacturer "BYD").

Summary. Hello dear, BYD brings the DM-i super hybrid architecture; On April 17, Dongfeng released the Mach power brand in the passenger car field; On April 20, Chery Automobile released the "Chery Power"; On July 21, Great Wall Motor released a super powertrain; Geely launched the global power technology brand "Leishen Power"; In addition to the previously released GAC Trumpchi Julang Power and Changan Blue Whale Power, the Chinese brand internal combustion engine has achieved historic development in terms of power parameters and thermal efficiency.

Hello dear, BYD brings the DM-i super hybrid architecture; On April 17, Dongfeng released the Mach power brand in the passenger car field; On April 20, Chery Automobile released the "Chery Power"; On July 21, Great Wall Motor released a super powertrain; Geely released the global Donggao Shizuli technology brand "Leishen Power"; In addition to the previously released GAC Trumpchi Julang Power and Changan Blue Whale Power, China's Pinqi Bad brand internal combustion back alarm has made historic development in terms of power parameters and thermal efficiency.

Electric cars, kisses.

Title: What are the latest power battery technologies or platforms released by major manufacturers?

Hello, no spring heat diffusion, high line surplus manganese iron lithium, large cylindrical battery ......At the World New Zen Rolling Energy Vehicle Conference held on August 28, industry leaders such as CATL and Samsung SDI successively announced the latest progress of the company's power battery technology.

Hahaha, I'm selling Tianneng batteries, let me talk about it. Tianneng batteries have the advantages of high cost performance and large discharge current, and some batteries have defects such as narrow operating temperature range, easy water loss and thermal runaway; Tianneng battery does not have this situation, it has the advantages of stable performance, wide operating temperature range, overcharge and overdischarge resistance, and long life.

The main advantages are as follows.

Large capacity, patented structure design, mining the maximum effective use space inside the battery, 2hr capacity is 5%-10% higher than similar products;

Superior high-current discharge performance.

The grid adopts the latest structure of thin transverse ribs and dense longitudinal ribs, which greatly reduces the ohmic internal resistance of the battery, and the internal electrochemical reaction of the battery is uniform when the high current is discharged, the voltage drop is small, and the recovery performance after deep discharge is good;

The grid has good corrosion resistance.

The unique patented alloy material makes the grid have super corrosion resistance and creep resistance;

High utilization rate of active substances.

The special additives of the patented product refine the tetraalkaline lead sulfate particles generated in the paste and curing, improve the utilization rate of the active substance, and greatly improve the output rate of the battery;

Water loss is minimal. Increase the amount of liquid added to the battery, which solves the problem of water loss and battery expansion in the later stage of battery use;

Low self-discharge rate.

Using a certain amount of anode additives and adding them to the anode active substance with a special process method not only overcomes the effect of large self-discharge, but also reduces the power consumption by 79% at the initial charge;

Good low-temperature performance.

The highly active conductive materials and low-temperature expanders are added to the plates, and the product has a super low-temperature charge-discharge acceptance capacity, which avoids the sharp reduction of the battery's driving range in winter.

Safe and reliable. Each check valve of the battery box is independently designed, and the automatic anti-early drying and detachable safety valve are adopted, which not only has the function of checking and replenishing the liquid of the ordinary battery, but also has the sealing function of sealing the one-way exhaust of the battery, so that the battery loses less water in the process of charging and discharging, and the sealing reaction efficiency is higher.

Long service life.

The battery discharge depth DOD of 80% in the standard state can be carried out for 400 600 cycles, and the next charge in the standard state can continue the mileage of 40 60km

Well, what I want to say is all ...... upstairs

The general electric car battery is divided into: 24V, 36V, 48V, 60V, 64V, of which 36V and 48V are the most common, accounting for more than 95% of all electric vehicle users. 36V is commonly used as:

There are two kinds of 36v10ah, 36v12ah, and some ones are also used in 36v14ah, 36v17ah, 36v20ah. 48V commonly used are: 48V10Ah, 48V12Ah, 48V14Ah, 48V17Ah, 48V20Ah, and some are also used 48V15Ah, 48V16Ah, 48V18Ah, 48V22Ah, 48V24Ah, rarely used.

So how do you know the specifications of your electric vehicle battery? Generally speaking, there are two methods, the first method is the lazy method, which is to look at the output current of the charger, and you can know what type of battery it is according to the following parameters:

Tip, look at the output voltage on the charger.

36V is: output voltage 36V--42V DC**A.

If yes, then it's 10ah.

If yes, then it's 12ah.

48V is: output voltage 48V--59V DC**A.

If yes, it's 48v10ah.

If yes, it's 48v12ah.

If yes, it's 48v14ah.

If yes, it's 48v17ah.

If yes, it's 48v20ah.

The first method sometimes does not work, because there are some poor chargers on these parameters at all, so I have to use the second method to see, this method is the simplest, most direct and most practical, that is: open the battery box, count how many batteries there are, if it is three, then generally speaking, it is 36V, if the battery is marked, the battery is marked.

Same as above, if it is 4 blocks, then it is generally 48V, of course, it is also necessary to distinguish, only 12V or 16V, if it is only 12V, then it is 48V, if it is 16V, then it is 64V.

If it's 5 blocks, then it's 60V.

The voltage is determined, and then the capacity is determined, if the battery is written on it is 6-dzm-10, then it is 10ah, if it is 6-dzm-12, then it is 12ah, and so on.

Is there a direct supply of Tianneng battery in Binzhou City, Shandong?

The Tianneng battery I bought broke down in a few months, and the Tianneng can't buy junk products, and the customer service is also poor.

It is possible or impossible to be charged, and it is a little uncertain, anyway, it will definitely work well when charging.

Compared with ordinary miscellaneous batteries, Tianneng batteries use high-purity dilute sulfuric acid. The sulfuric acid we generally see is a yellowish liquid, while the high-purity sulfuric acid is transparent. This is because there are 3-valent iron ions in general sulfuric acid.

This is an unavoidable defect of general sulfuric acid. Ordinary sulfuric acid is synthesized from iron sulfide, in which it is difficult to remove this small amount of iron ions, which is why ordinary sulfuric acid is yellowish. Batteries made of dilute sulfuric acid containing iron impurities will cause serious self-discharge due to the cyclic catalysis of iron ions.

The life span is greatly reduced, and irreversible sulfation can be caused in 1 month in severe cases. Tianneng battery does not hesitate to spend a lot of money to use high-purity sulfuric acid, and the extremely low impurity has become the guarantee of the durability of Tianneng battery.

First of all, how far an electric car can run has a lot to do with the capacity of the steamer and the electrical function.

Electric bicycle power battery series.

This series of batteries is a series of batteries specially designed and developed by Tianneng for electric mopeds and electric bicycles. The product has a number of national patent protection technologies, and is a world-leading high-performance, long-life lead-acid battery.

Traction battery series.

Lead-acid batteries for traction are mainly used as DC power supply for electric forklifts, electric storage vehicles, electric tractors, electric flat cars, electric yachts used in industrial and mining enterprises, warehouses, wharves and stations, and can also be used as supporting DC power sources in other aspects.

Electric vehicle battery series.

Pure electric cars, hybrid vehicles, electric buses, sightseeing vehicles in tourist areas, ships and patrol cars, etc.

Electric tricycle battery series Lead-acid battery for electric tricycle is a power DC power supply for electric tricycles, and can also be used as a DC power supply for electric four-wheeled vehicles and other aspects.

Golf cart battery series.

Lead-acid batteries for golf carts are used as a power DC power supply for golf carts, electric sightseeing vehicles, electric tour buses, electric police cars, electric recreational vehicles, etc., and can also be used as a DC power supply for other aspects. Civil high-capacity nickel-metal hydride battery series.

It is used in digital cameras, flashlights, remote control, cordless ** and other civilian products.

NiMH batteries (packs) for low temperatures

Nickel-metal hydride low-temperature batteries (packs) suitable for use in low-temperature environments

NiMH batteries (packs) for high temperatures

Mining lamps, high temperature closed environments, etc.

NiMH batteries (sets) for light power tools

Electric bicycles, light lawn mowers, vacuum cleaners, sweepers, all kinds of light power tools, etc. Lithium-ion batteries for electric bicycles and electric vehicles.

This product is used in portable electric bicycles, electric bicycles, pure electric cars, hybrid vehicles, electric buses, golf carts, sightseeing vehicles in tourist areas, boats and patrol cars, etc.

High-safety lithium-ion batteries for lighting fixtures.

This product is used in the lighting fields such as mining lamps, street lights, and garden lights.

High-power lithium-ion batteries for power tools.

This product is used in power tools, lawn mowers, electric toys, electric model airplanes, hybrid electric vehicles and other fields. Charger series.

The smart charger for electric vehicles is mainly based on lead-acid batteries for rechargeable electric vehicles, and extends to nickel-metal hydride battery chargers.

Electric motor series.

Tianneng electric bicycle hub motor is optimized for the characteristics of similar products after extensive market research. The performance indicators of the product have been tested by the relevant appraisal departments and proved by the long-term use of users: large starting torque, strong climbing force, high efficiency, low noise, low failure rate, and leading design technology.

Controller series.

This controller adopts high-performance single-chip microcomputer imported from Europe and the United States. Higher reliability, more functions, and wider applicability than other similar products; Soft start effectively reduces the impact on the motor, prolongs the service life, excellent circuit design, has reliable over-current, under-voltage protection, stable control performance; Super load performance, which can achieve zero start and excellent climbing ability; Efficient control and small self-power consumption make the vehicle performance the best.