Generally, the bathing time is relatively long, which water heater is suitable for a long bath?

It depends on how your tap water situation is If the water pressure is enough, I think it is better to use the storage type electric water heater General** is about 1000---3000 It is also more convenient to use Take a bath while heating Even if it takes a long time to wash, it doesn't matter And now the electric water heater has the function of preventing electric walls It is also very safe After-sales service is also very good Almost all have to be guaranteed for more than 6 years.

The bathing time is relatively long, and it is better to use an electric water heater, which does not burn oxygen and does not emit carbon dioxide.

If you take a long bath and still need hot water, I think it is more convenient to use an instantaneous water heater, which is not limited by time and can have hot water when you turn it on.

This mainly depends on how much stock you choose in the water heater. If you use a large stock, it will take a long time.

For water heaters that take a long bath, consider large-capacity water heaters and water heaters that heat up quickly.

It is more suitable to use a gas water heater Only natural gas can meet your requirements.

What brand is good for bathing, and the bathing time is longer in winter than in summer, what kind of bath is more suitable for you? Air energy water heater, air energy water heater, also known as air source heat pump water heater, air source water heater is to absorb the low-temperature heat in the air, after fluorine medium vaporization, and then the general compressor compresses the pressurized heating, and then through the heat exchanger conversion to water heating, the compressed high-temperature heat energy is used to heat the water. Its advantages are that the separation of water and electricity is safer, easy to use, not affected by the weather, as long as there is air, there is hot water, there is hot water 24 hours a day, simple installation, long service life, no maintenance is required during the period, convenient and efficient, you don't need to consider the best choice.

Buy a regenerative electric water heater. Generally, a case of water can be washed for a long time.

This thing seems to have no brand restrictions.

You can consider using an air energy water heater, which is much safer than a general water heater and a gas water heater.

It depends on the temperature of the water in the tank, if it is cold water, it takes more than 3 hours to heat the water to 75 degrees, and the water heater will automatically stop heating, and there is an indicator light on the water heater, and you can take a bath when the heating indicator light is off.

If you take a bath in summer, you can take a bath after about 20 minutes of electricity, and the appropriate temperature for human bathing is generally about 42 degrees, but it is better to have a higher heat temperature in winter. The 50-liter water tank is generally enough for one person to take a bath after the water heater burns until the water heater automatically stops heating.

A 60-liter electric water heater can be washed continuously for more than 16 minutes at most.

An electric water heater generally has a maximum boiling water temperature of 75 degrees Celsius, so a 60-liter bucket of 75-degree water is equivalent to a bucket of 40 degrees Celsius of hot water.

The storage type electric water heater can heat a tank of water, and how long the hot water can be used depends entirely on the capacity of the hot water tank, the speed of the amount of hot water used, and the temperature of the water set by heating.

1. If you are using a storage water heater and the bathing time is not long (less than half an hour), the water heater does not need to be turned on all the time.

Because of the storage type electric water heater, the water is heated by the electric heater, the water temperature is controlled by the temperature switch, when the water temperature reaches the temperature, the temperature switch automatically cuts off the power to stop heating, when the water temperature drops to 65 degrees, the temperature switch automatically turns on the power to start heating, so the cycle is repeated in the cherry blossom ring, so turning off the water heater for a period of time does not affect the use.

2. If you use an instantaneous water heater, you must keep it on when taking a bath, otherwise there will be no hot water.

Because instantaneous electric water heater is a kind of water heater that can quickly heat the water through electronic heating components, and can control the water temperature, flow rate, power, etc. through the circuit, so that the water temperature can reach a temperature suitable for human bathing.

Instant heating, no waiting, usually within a few seconds to start heating, so there is no hot water when the song is turned off.

3. If you are using a gas water heater, then you should always leave it on when taking a bath, and there will be no hot water as soon as the fire stops.

Because of the gas water heater, turn on the water heater switch, cold water enters the water heater, flows through the water quantity sensor, the integrated element located outside the water quantity sensor sends out an electronic pulse, the combustion fan starts, the gas enters the burner, the colleague igniter makes the ignition needle rub out the spark discharge and ignition, at this time, the flame detection rod located in the upper part of the burner detects the flame signal, and the combustion indicator light is lit through the control circuit, and it is maintained, so once the flame is turned off, there is no hot water.

It is better to wash it once in two or three years, and if there is a pre-water purifier, it is okay to wash it once in five years, because if you don't clean the rust and scale in the water tank for a long time, it will harm the human body and be unsafe.

Generally, the newly bought water heater is cleaned once every three years or so, and it is best to clean it once a year after three years, and it is also determined according to the quality of the water source used in the water heater.

The water heater for bathing is best to clean it simply every six months, which is perfect for one or two or three years to find a brand after-sales service for a deep cleaning. If the number of washes is too small, it may affect the quality of the bath water, and also affect the heating efficiency of the heating rod and waste electricity.

It depends on the capacity of the water heater, the hot water heating temperature, the tap water temperature, the speed of hot water consumption and other key factors, these factors are different, the length of time that hot water can be used is different.

For example, if you have an 80L electric water heater, the hot water heating temperature is 60, the tap water temperature is 15, the hot water temperature is 42, and the hot water usage speed is 80*(60-42) (42-15)+80] = minutes, and the actual continuous use of hot water will be shorter than this.

The bathing time of a storage electric water heater is determined by the capacity of the electric water heater.

1. After taking a bath every time, turn off the power first, and then turn off the water after 5 seconds, so that the heater can be maintained;

2. If there is no one at home for a day and a night, turn off the power supply and inlet angle valve of the water heater to ensure the safety of water and electricity;

3. For some users who are not accustomed to turning off the power of the water heater, it is necessary to check whether there is any problem with the water heater frequently, and if any abnormal situation is found, it should be sent to the maintenance point for maintenance in time. It takes an average of 3 years to replace the heater and thermostat at the maintenance point when using a normal water heater;

4. If you find that the water output of the shower shower is reduced, then you should clean up the clogged debris in the shower in time, so as to ensure the smoothness of the outlet and prolong the service life of the water heater. If the installation and use of the instantaneous electric water heater is not correct, it will also cause the product to not work properly, so pay attention to the following matters when using:

1) Do not use the mixing valve, the instantaneous electric water heater does not need to use the mixing valve, because the use of the mixing valve will have cold and hot water flowing out at the same time, which will lead to the flow of hot water becoming smaller, resulting in the water temperature of the water heater being too high, resulting in the phenomenon of overheating. The customer service staff of the product manufacturer should inform the customer who uses the mixing valve that the machine is directly turned on to the end of the hot water and does not need to mix cold water, so as to extend the service life of the instantaneous electric water heater.

2) The flow of water should be controlled. When installing the water heater, you must use the special shower with the manufacturer, and adjust the flow and temperature of the water when the water heater is working.

If the basin is also hot at the same time, set the water heater temperature to the highest before bathing. When the temperature is reached, start bathing. After taking a bath, adjust the temperature to close to the human body temperature, that is, about 40 degrees, and do not turn off the power to keep warm, so as to save electricity and do not produce scale.