How do I set up disc boot on an HP desktop computer?

It is recommended that you can set up the optical drive boot as follows:

Put the installation startup disc into the CD-ROM drive and restart the computer;

When the "HP Compaq" logo appears on the screen, press the "F9" button continuously;

Select "cd ***."

romdrive", press the enter key to confirm.

Note: Due to the different models, the interface of the optical drive boot is slightly different, please select the one that represents the optical drive.

Enquire further.

After backing up the data, you can insert the system installation disc into the optical drive, restart the computer, press the F9 key repeatedly after booting up to enter the startup item settings, and choose to boot from optical drive (e.g. *** cd-rom or optical

diskdriver), and then you can boot the disc from the optical drive to install the system.

Remind you that after entering the disc boot interface, if pressanykey appears

toboot

fromcd

or***...Tips, please press a button quickly and casually, and you can continue to install.

We hope you find the above reply helpful.

Here's how to put discs on HP desktops:

2. Click the button on the right side of the optical drive with your hand to open the computer optical drive.

3. Place the disc according to the CD drive card slot, and then turn off the CD drive.

4. Find the computer shortcut on the desktop.

Double-click to open the computer.

5. Under the device with removable storage, you can see my optical vertical travel template.

1. First open the computer's optical drive or insert the external optical drive, and then put the optical disc of the system into the optical drive.

2. Then restart the computer, press the F10 button on the keyboard at the same time, which is the special button for HP laptop to enter the BIOS. (F9 is a fast boot option, you can directly choose how to start).

3. Then enter the BIOS interface and select the System Configuration option in the title bar.

4. Go to the options interface of the system settings, and select the boot options at the bottom.

5. Enter the boot setting interface, first of all, make sure that the cd-rom boot option switch is enabled on, some notebooks do not have this option to ignore this step.

6. Next, select the boot method in the list below, there are two ways to UEFI and Legacy, choose the corresponding list according to your own situation, among which Internal CD *** ROM Drive is the option to boot the disc.

7. Here you need to adjust the internal cd *** rom drive option to the first position, press F5 or F6 to adjust the up and down of the option after selection, and adjust to the first position to start from the disc.

8. After the setting is completed, you need to save it to take effect, press the F10 button on the keyboard, and select the yes option in the pop-up prompt to change the saved window, and this is done.

Here's how to put discs on HP desktops:

2. Click the button on the right side of the optical drive with your hand to open the computer optical drive.

3. Place the disc according to the CD drive card slot, and then turn off the CD drive.

4. Find the computer shortcut on the desktop and double-click to open the computer.

5. Under the device with removable storage, you can see my disc.

If you have an optical drive on an HP desktop, open the optical drive and put the disc in, if you don't have an optical drive, you can't use the disc;

A CD-ROM is an item that uses optical information as a storage carrier and is used to store data. Non-rewritable discs, such as CD-ROM, ***-ROM, etc.; and rewritable discs, such as CD-RW, ***-RAM, etc.

Optical disc is a device that uses the principle of laser to read and write, and is a rapidly developing auxiliary memory, which can store a variety of text, sound, graphics, images and animations and other digital information.

Definition of optical disc: that is, high-density optical disc (compact disc) is an optical storage medium (for example: magnetic disc is also an optical disc) that has been developed in modern times and is different from a completely magnetic carrier, and the method of storing and reproducing information with a focused hydrogen ion laser beam processing recording medium, also known as laser disc.

HP Desktops If you want to install a system on CD, what should you do? The following is for you to make a detailed HP desktop disc boot method introduction! Hope it helps!

HP Desktop Disc Boot Method 1:

Enter the BIOS settings first, the keys to enter the BIOS are different for different machines, generally there will be a prompt at the bottom of the motherboard screen that appears just after booting, after entering the BIOS, select the BOOT item, and then select the BOOT DevicePriority item, and then put the inside.

1st boot device to your hard drive.

HP Desktop Disc Boot Method 2:

BIOS is a term for read-only memory, which of course you can't see (you can see it when you take the computer case apart).You can see the boot setup is right, click it, select the boot room, and then press f10 to exit, click yes after the system automatically restarts, that is, the optical drive starts.

HP Desktop Disc Boot Method Three:

When you start the computer, press F12 to enter the interface shown below.

Move the up, down, left, and right cursor keys on the left side of the keyboard, select the instructions in the figure below, and press enter to enter after selecting the effect in the figure above.

Do you see the place where the circle lives, press enter to enter, select the one shown in the figure below and then press the cursor to select cdrom, press enter to confirm.

Then press F10 to save.

The contents of the disc will appear after the computer restarts.

HP Desktop Disc Boot Method IV:

HP's computer enters the BIOS setting press F1, advanced settings press F11, this is different from other machines, the others are much the same, you can refer to the upstairs settings, only this one is the easiest.

Don't know how the HP laptop enters the BIOS settings disc boot, so how does the HP laptop enter the BIOS settings disc boot? The following is my collection of how to enter the BIOS settings disc boot of the HP notebook, I hope it will be helpful to you

How it works: 01 Press F2 to enter the BIOS system immediately after booting.

02 Locate the boot option, find the optical drive boot item (ATAPI CD-ROM) below, and then use F5 F6 to set the disc drive as the first boot item.

03 After setting, press F10 to save and exit.