-
Anonymous users2024-02-12Only damaged electronic originals can be replaced.
-
Anonymous users2024-02-11It depends on what kind of wrong way it is.
1. If the high voltage is connected to the low voltage, and it exceeds the withstand voltage value of the receiving circuit, it will definitely burn.
2. If the power supply and ground are reversed, and the circuit does not have an anti-reverse plugging design (generally only the power input has this design), most of them will burn.
3. If the power pin is connected to the signal pin, most of them will burn.
4. The low voltage is connected to the high voltage input pin, and it will not burn normally.
-
Anonymous users2024-02-10Does it mean that the motherboard is connected to the chassis signal cable? Generally, the 4 groups are power and hard disk indicators, as well as boot and restart. Carefully check the motherboard's instructions or printed logos when plugging in.
If the power button of the case is connected to the LED indicator interface, it will only fail to send a boot signal, if it is connected to the restart interface, the boot button will become a restart function, which will not cause the motherboard to burn out, and the power button 2 wires do not distinguish between positive and negative poles.
-
Anonymous users2024-02-09There are a few main ways to learn about computers.
1: The computer is very important for beginners, and the teacher introduces the door, but in the future, it will depend on self-study. Self-learning ability is particularly important for computer learning, the reason is that the computer is developing rapidly, and only by mastering self-learning methods and having self-learning ability can we cope with the ever-changing development situation of computers.
Some people say,"Self-learning is easier said than done! "I said that other subjects may be more difficult to learn on your own, but computers are relatively easy. Why?
Because the computer is getting better"Approachable", so that people can see and touch. Things that can make people move are easy to learn, such as how old a doll dares to turn on the TV and adjust the channel, can control the VCD, etc., isn't the TV and VCD machine high-tech products? As the learning object, the theoretical knowledge and practical environment are unified, the learning content and progress can be mastered by oneself, and most of the things that cannot be understood in self-study can be solved by the computer.
Therefore, I say that it is easy to learn on your own, easy to learn on your own. Of course, it would be better to have a guide book that is easy to study on your own.
-
Anonymous users2024-02-08If you connect your monitor to power incorrectly, the cable or adapter may be damaged, causing the monitor to not work properly, or it may even damage other parts of your computer. In fact, sometimes connecting the monitor to the power supply incorrectly can also lead to an electrical fire or other safety issues, so if you encounter this situation, you should disconnect the power supply as soon as possible and take the necessary steps to fix it.
1.Disconnect the power supply: First, you need to disconnect the power supply from the monitor and the computer. Make sure that all devices on your monitor and computer are turned off and disconnected from them. This protects against electrical shocks and protects yourself and your equipment.
2.Check the connections: Next, check your monitor's power supply, cables, adapters, and cables to your computer. Make sure all connections are correct. If you find any damaged or incorrect connections, replace or adjust them in time.
3.Try power on again: If you've confirmed that all connections are correct, plug it back in and try to power it on. If the monitor is still not working properly, you may need to check other related equipment further and may need to replace the monitor or other damaged parts.
4.Send a professional to check it: If you're not sure what's wrong with your computer or monitor, or if you don't know how to fix it yourself, it's best to take it to a professional repair center for inspection and repair.
They have specialized technology and equipment that can better diagnose problems and provide more reliable fixes.
In conclusion, incorrectly connecting the monitor to power can cause serious problems, so it's important to check and fix it promptly. Take the necessary steps as soon as possible to keep your monitor and computer running at their best and keep you and your device safe.
-
Anonymous users2024-02-07The short circuit will not burn out the motherboard, the circuit short circuit current does not pass through the electrical appliances, see if your power switch jumper jumps wrong, if not, connect your power supply green wire with a wire diagonally opposite it to see if the power supply fan turns, if not, the power supply is broken.
-
Anonymous users2024-02-06It's hard to say such a problem, but according to my experience, the motherboard may have been broken before, and as long as you replace the power supply in the past, it is good, and the motherboard should not be burned.
-
Anonymous users2024-02-05Short circuit is generally not burned out of the motherboard, this thing because the circuit short circuit when the current does not pass through the electrical appliances, according to the situation you said, because the motherboard has a problem, your power supply green wire and black wire are connected to see if the power supply fan turns, if the turn is the power supply has no problem and does not turn, then the power supply is broken, you look for other reasons, the easiest way is to find a piece of the same motherboard to try, you know that the problem is **, good luck! (Hopefully you have the basic skills in this area, otherwise the problem will get bigger and bigger).
-
Anonymous users2024-02-04Generally, it will not be plugged incorrectly, your motherboard may be broken before the power supply is replaced, or it may be that the motherboard is broken due to the connection of parts or static electricity when you change the power supply.
-
Anonymous users2024-02-03Is it the wrong power connection of the start button? Double-check whether the chassis front power supply start-up jumper is connected incorrectly!
-
Anonymous users2024-02-02I have also encountered this situation, which is generally caused by the aging of the motherboard and power supply, and it may be okay to plug and unplug it a few more times.
-
Anonymous users2024-02-01If it is wrongly connected, it will be, because the output voltage on the same power supply is different, there are 5V 12V
The question is how can you connect it wrong, the current power supply is designed with fool-proof interfaces.
-
Anonymous users2024-01-31Switching power plugs and motherboard sockets.
Poor contact will occur!
But modern motherboards don't appear.
Plug in the wrong "phenomenon, so you can't "burn" the motherboard!
When you plug it in.
It must be guaranteed to be in place!
Their locking hooks must:
You have to be locked down!
You should mainly check 4 or 8p plugs!
Since it is hardwired, it is most likely to be out of place!
Lonely mountain man.
-
Anonymous users2024-01-30No, he can't plug in the different wires, see if the jumper of the motherboard is plugged in wrong.
-
Anonymous users2024-01-29How to plug in the wrong power supply.
There are two interfaces in total.
No matter how you plug it in, you won't plug it incorrectly!
It should be something else, isn't your power supply broken!
-
Anonymous users2024-01-28The question is not. Show me options. I pressed 8 and it became like this. What is this question that answers the question that you are turning off and on again. When I got to the selected place to take a picture, I saw that in addition to 8, there are other options?
Question: Now it's turned on like this.
You probably have to restore the system for this problem.
-
Anonymous users2024-01-27If you don't have a spark, it's probably fine, you unplug everything and check it all over again. Is it that the wire is not connected?
The power supply fan does not rotate, and the power supply has no current?
-
Anonymous users2024-01-26Switching power plugs and motherboard sockets.
Poor contact will occur!
But modern motherboards don't appear.
Plug in the wrong "phenomenon, so you can't "burn" the motherboard!
When you plug it in.
It must be guaranteed to be in place!
Their locking hooks must:
You have to be locked down!
You should mainly check 4 or 8p plugs!
Since it is hardwired, it is most likely to be out of place!
Lonely mountain man.
The wiring method of the rectifier power supply ZS-2, first of all, you have to know what one of its positive and negative poles is, or the positive and negative poles of it, and then use it in this order, and then you can wire it according to their uh linear energy positive and negative electrodes.
1.Full name: low pin count; In '97, Intel released a new interface specification to replace the traditional ISA bus. >>>More
Personally, I think it's the fault of human nature, I think all people living in the world are equal, don't treat each other differently, this will definitely cause serious damage to the psychology of others.
1.Click the "Search" button on the toolbar, enter the keywords you need to find, that is, the material or component equipment review form, and click to find all of them.
It's very simple Since she is a filial son, then you do what a filial son should do If you can't find a place, you don't have the heart Since both parents know that they are about to get married, then launch the collective power is huge You should hand tea and water to your future mother-in-law, and you should urinate The so-called time to see people's hearts As long as your future mother-in-law is discharged from the hospital in good health, your business will be done.