iPhone7 can t touch the original screen, but the domestic screen can, what s going on? 45

That means there's something wrong with your phone! Normal certainly won't be like this! It will definitely be original.

Underneath the panel is the touch screen, then the LCD screen, and the three are pressed together. It's just that the external screen is broken, and if the touch and display are normal, the external screen can be replaced separately, but if one of the touch screen or LCD screen is broken, the entire screen assembly can only be replaced. Replace the external screen These are done by private workshops or mobile phone stores, and as long as the screen is damaged after sale, the screen assembly must be replaced.

Let me answer it for you,There are some batches of domestic screens3D touch wiring and the original screen arrangement,The result is directly that the series resistance next to the 3D fingerprint seat is burned or the cable seat is poorly grounded Because the domestic screen does not have 3DThe touch does not affect the touch and home of the screen,The original screen touch and home all need to go from the 3DThe signal So the most direct performance is that the original screen does not touch, The maintenance method is to only buckle the screen touch cable or short the resistor next to the seventh pin of the cable base.

I also encountered this problem today, I bought someone else's original screen, and it doesn't work to install it, and the display is normal, but there is no touch! Speechless! It's all normal to replace the bad screen that you broke and you have tried it many times, and the result is the same I don't know what the problem is!

I also said that it was the manufacturer's problem, but I compared my screen with the dismantling screen I bought, all of which belong to LG! Ay!!! By the way, did the downstairs owner solve this problem! Thank you.

You are sure that it is the original screen, the market for mobile phone accessories is deep, you can use it if you change the brand, the mobile phone is a consumable, and it is appropriate to do so.

The base of the motherboard is broken, and the domestic screen cable is stretched.

Your phone is fake, or you force restart it to give it a try.

Because yours is a copycat.

Has the landlord problem been solved? I have a 7P that's the same as you described.,Buckle the original screen3D cable and don't touch it, and everything is normal when you change the group screen。

1. Drop a drop of water on the iPhone screen (without film), original: water bead type; High imitation: water droplets spread out.

2. The manufacturing method of the fake screen is different from the original screen, just glue it is just glued, then it is inevitable that there will be light leakage, open a white background picture after booting, and the obvious light leakage should be the non-original screen.

3. The front camera and the glass are out of place, and the original screen cannot have any misalignment with the camera, and you can't see anything next to the camera.

4. Look at the resolution, touch, the resolution of the screen that is not the original will be relatively low, and there will even be occasional blurred screens.

Your situation is the same as mine, is it solved now? How to fix it.

There is a difference, the original sensitivity is relatively high, and the non-original screen does not have such good acuity.

Content expansion: 1. Apple 7 plus screen damage: the outer screen is broken, the touch point does not move or jumps randomly, and the display screen is black screen stripes, etc. If it is determined that the screen asks the rent judgment question, you need to replace the screen, and now there are three types of Apple 7 plus screens on the market.

2. What is the difference between different screens?

1. Original screen.

The original screen has a high display resolution, good color brightness, high touch sensitivity, and it is difficult to have problems without falling, pressing, or entering water.

2. Press the screen backwards.

The rear pressure screen is much worse than the assembly screen, so many stores use the pressure screen as the original screen replacement after the pressing. The rear pressure screen is generally the original screen with the outer screen glass broken, and the original outer glass is separated by the instrument and then pressed into a new one. According to the different pressure screen technology, the quality is different, the general display effect and touch sensitivity are slightly poor, and some of them will have touch failure, random jumping, blurred screen, degumming and other phenomena.

3. Assemble the screen.

The assembled punch screen is an imitation of the original screen, and the internal and external screens are not original, and the quality is poor.

3. Therefore, whether it is from the perspective of user experience or quality, changing the original screen is the best choice, but there are too many shoddy ones on the market at present, and ordinary consumers themselves cannot distinguish between them.