Can an aircon socket share a circuit with other outlets?

Generally, the home decoration air conditioner uses 4 square plastic copper wires.

According to the power, it can share a four-way with other sockets, but in order to ensure the safe and stable operation of the air conditioner, it is not recommended to share a circuit. In this way, it can avoid using the same line with other high-power electrical appliances, and can avoid the fluctuation of air conditioning caused by the instability of other electrical appliances.

If the air conditioner is small, and the total power with other electrical appliances is not very large, the specification and thickness of the power cord can withstand the same circuit, and there is no problem.

No, the air conditioner has a large current, and it must be a dedicated line.

As long as the line capacity is large enough, it is completely fine, if the line capacity is not enough, it will affect the use of other electrical appliances, especially fixed-frequency air conditioners, the starting current is large, and the circuit voltage instability factor is too large when starting.

It's best not to share sockets, because the power of the air conditioner is relatively high, which will cause the life of other appliances.

The air conditioner has a high power socket and is best used separately.

Bedrooms can have a set of 4 square wires for air conditioning sockets and ordinary sockets, but it is best to go back to the electrical box control in each bedroom. Of course, it is also possible to separate each socket and control the return box independently. Most of the main line is 6, the living room and bedroom electricity is too much, I'm afraid your main line can not stand it, so 4 is enough, the air conditioner should be a separate line, don't forget to install an overload switch on the line, a circuit is not how many lamps and sockets can be used, but how much wire you use in your circuit and the wattage you use, first of all, the lighting line and the socket line are separated, and the key to connecting the lamp line is whether your switch button is one or two presses.

It has lasted for decades, the people are installed bright wires, can be seen and repaired, very convenient, anyway, this 220V on a fire and a zero two wires, how to go around is to reach the fire wire into the switch bedroom on a route, you also have to connect it with the socket how can it send electricity? The neutral of your lighting wire is not inside the switch, while the neutral wire of the socket is inside the box, and they come from the two branch wires (small gates) of the two entry wires.

The lighting control switch used, and the socket is an old-fashioned control switch with a matching wire safety current-carrying fuse, and the old-fashioned socket is OK and safe, otherwise it is not possible and unsafe First of all, the wire backbone should be increased. Then the branch knot should be tight, and it is best to break the skin and install the branch line through it with needle-nose pliers! Wrap it firmly in good electrical tape!

It's just that now there are more electrical equipment at home, and a single set of wires must be very thick to be able to use, considering the cost of installation and construction, and the failure to affect the other electricity in a room, so it is better to divide a few more roads. The indoor route can also be used, but the main line must be thick to meet. The corona of each branch will do...

If the branch. If something goes wrong, there will be a power outage, and I personally think that this is too inconvenient or it is better to do a few more circuits than to hand it over. It is strictly forbidden to mix lighting with sockets or with kitchen sockets in the building electrical design code.

It can be shared with the air conditioning line, because the power of the air conditioner is not large, and it is similar to ordinary electrical appliances.

It is not recommended to share it with the air conditioning line, because the air conditioner generally uses a large current, which will cause a large number of sockets to be shunted when starting, affecting the normal use, and there will also be large current noise.

No. Because the power of the air conditioner is very large, it is easy to overload the line, so it is best to use it separately.

First of all, it depends on how much power the air conditioner is, if it is a batch of goods is a batch, in fact, ordinary sockets can be completely driven. So there's no need to take another route to use it alone.

The air conditioner plug should not be plugged into a regular socket.

Difference Between Air Conditioner Socket and Normal Socket:

1. The panel of the air conditioning socket is equipped with a power supply indicator, a special jack for air conditioning, and an infrared receiver, which has high safety when the power supply is not provided. Ordinary sockets have one or more sockets that can be plugged into the electric furnace wiring, through which various wiring can be inserted, which is conducive to connecting with other circuits. Through the connection and disconnection between the line and the copper parts, the circuit is turned on and off.

2. The opening distance of the blade of the air conditioning socket and the ordinary socket is different. The thickness of the ordinary insert is 30 filaments. The thickness of the blade of the air conditioner socket is 60 wires.

3. After the air conditioner is turned on, the air conditioner socket will start to supply power until the air conditioner is turned off, and the socket will automatically power off. If the air conditioner is not turned on, the power supply of the socket will be automatically cut off for about 180s, and it will return to the normal state of no power. These are features that regular outlets don't have.

Precautions for socket selection:

1. The power socket should be made of products that have been inspected and qualified by the relevant national product quality supervision departments.

2. The rated current of the power socket should be greater than the rated current of the known use equipment. Generally, the rated current of the single-phase power socket is 10A, and the special power socket is 16A.

3. Safety sockets should be used for power sockets in residences, and splash-proof sockets should be used for wet places such as toilets.

Fourth, in a relatively humid place, the installation of sockets should be accompanied by a waterproof box.

5. For household appliances that are plugged in and have a risk of electric shock, they should use sockets with switches to disconnect the power supply.

Hello, one socket cannot be used for two air conditioners at the same time. This is because each outlet has a current rating, which is the maximum current that the Rising Ridge Socket can withstand. If two air conditioners are connected to an outlet at the same time, their total current will exceed the rated current of the outlet, which may lead to safety problems such as overloading the outlet and even causing disasters.

Also, even if you use one power outlet extender, you can't connect two air conditioners at the same time. Because the rated current of the extender is also limited, if its rated current is exceeded, there will also be an overload. Therefore, in order to guarantee the safe use of household appliances, each air conditioner should be connected to an outlet separately.

If you don't have enough sockets in your home, consider adding a plug socket or using a power extender, but be careful not to exceed the rated current of the socket and extender. Off-topic expansion: In addition to air conditioners, other high-power appliances such as electric water heaters, rice cookers, etc. should also be connected to a separate socket to avoid safety issues.

At the same time, when using electrical appliances, you should also pay attention to the rated power of the electrical appliances, and do not exceed the carrying capacity of the socket and the electrical appliances themselves. <>

The air conditioner cannot share the socket with other electrical appliances, because the current of the air conditioner will be very large at the moment of starting, about 4 amps of normal 1 horse, about 5 amps, and the air conditioner compressor cylinder. When the shaft is held, the current will be greater about 27 amps, so it is recommended that it is best to take the air conditioning line alone.

Yes, of course, the special socket for air conditioning can be used to make a common socket. Theoretically, it would also be safer, as the air conditioning socket can be connected to a larger load. The air conditioner socket is 16A, which can meet the needs of the air conditioner or other high-power appliances (water heaters) in the home, and you should pay attention to the specifications of the plug when buying the socket.

Product Differences:

Clause. 1. Air conditioners belong to motor products, and motor products have starting current, and the maximum value of starting current can reach 3 times of the peak current. Therefore, the rated current of the air conditioning socket is large, generally 16A, 20A, 25A, 32A, etc., while the rated current of the ordinary socket is generally 10A.

Clause. Second, the opening distance of the socket is different for different amperes. The thickness of the plug of the air conditioner socket is usually 60 wires, while the thickness of the ordinary plug is usually 30 wires.

Generally speaking, a 16A socket is suitable for an air conditioner with 2 and a half horses, a 20A socket is suitable for a 3 HP air conditioner, a 25A socket is suitable for an air conditioner with more than 3 HP, and a 32A socket is suitable for an air conditioner with more than 5 HP.

Clause. 3. Compared with ordinary sockets, the copper sheet of the air conditioning socket is thicker and the jack is larger.