How to connect the network cable at home if it is not long enough, and can it be connected if the le

Of course, you can also buy a long line and replace this one**. That is, the whole line is replaced.

It's better to buy a wireless receiver, plug it into the host, it's convenient, the signal won't be too bad, and the router is a gigabit, which is easy to use. Hope.

It's okay to buy a new long one.

Just go to the hardware store and buy one, just go straight to it.

The network cable is not long enough to be connected. There are two ways to do this, one is to use insulating tape to connect like a wire, and the other is to use a dedicated adapter for docking with a docking head. Here's how:

Method 1: Insulating tape docking method (generally used for connection without network cable pliers), find 8 thin wires of different colors inside the network cable, connect the wires of the same color, and wrap them with insulating tape. However, due to the difference in docking techniques, this method may lead to the easy interruption of network signal transmission, or frequent network disconnection, etc., which requires strong professionalism to operate.

Method two, use a professional docking crystal head converter (generally used for the connection of network cable pliers), this method needs to use a network cable adapter, the general computer consumables store can be bought, use it in the middle of the two network cables, not only to lengthen the network cable, but also to connect the network cable, just a conversion head can only connect two network cables, need to connect more network cables, need to buy more than one conversion head.

Or find a professional computer repairer, they have the tools to connect you to the network cable.

If the length of the optical fiber network cable is not enough, it can be lengthened.

There are two ways to connect the network cable. One is to use insulating tape to connect like a wire, and the other is to use a dedicated adapter for docking with a docking head.

Method 1, insulating tape docking method (generally used for connection without network pliers):

Inside the network cable is 8 thin wires of different colors, and after the wires of the same color are connected, they can be wound with insulating tape. However, due to the difference in docking techniques, this method may lead to the phenomenon that the network signal transmission is easily interrupted or the network is frequently disconnected.

Therefore, the following connection is recommended.

Method 2: Use a professional adapter for docking the crystal head (generally used for the connection method with network cable pliers):

1. Go to the computer consumables store to buy a network cable adapter, which is a rectangle, and both ends are crystal head sockets;

2. Use it to add it between the two network cables to make the network cable longer. It is fast, convenient, beautiful and reliable.

In contrast, it is cheaper to make a strip or buy a longer strip than to buy a switch. You can buy a network cable docking joint, and then buy a longer network cable, you can dock the two lines. Routing is only used by multiple computers to access the Internet at the same time.

Do we dare to get a longer network cable? It's a big deal.

It's really not possible to buy a network cable connector two-way crystal head plugged in!

Hehe, if you think about this, there is a way. As said upstairs.

1.Cut it in the middle, then buy a network cable, and indirectly according to the color!

2.Buy a long strip.

Now is the Internet era, people's life and work are inseparable from the existence of the network, and the network that allows people to connect so conveniently only relies on a network cable for data transmission. Therefore, if you want to use the network normally in every family, the network cable must be connected, of course, in the process of connection, it is inevitable that the network cable is too short, so how to connect the network cable if it is not long enough? Let's take a look at it with Qeeka Home experts.

1. How to connect the network cable if it is not long enough.

Prepare a network cable and a network cable connector first, and the network cable needs to have a connection crystal head at both ends; The network cable connector has two interfaces, insert the prepared network cable into one of the interfaces, and insert the original network cable into the other interface; Finally, plug the other end of the network cable into the computer, turn on the computer to see if it is connected to the network normally.

Second, what should be paid attention to when pulling the network cable at home?

1. Pay attention to choosing the right one.

Now the home network is the same as the mobile phone account opening, there are a variety of ** to choose from, different prices ** in terms of network speed is different, if it is an ordinary family use, choose the ordinary**, do not need to pursue high-speed network. When pulling the network cable, you can first consult the relevant operator for details.

2. Pay attention to the account opening contract.

At the same time as pulling the network cable, you need to sign the corresponding account opening contract with the operator, here you need to pay special attention to see if there is a limit to the number of networking devices in the contract, and whether the router can be configured, if there is no router is very troublesome, you can not use the wireless network.

3. Pay attention to the length of the network cable.

Generally speaking, the home network cable does not need to be too long, if the excess network cable is exposed, it is easy to be damaged, such as being bitten by rats and other problems, and at the same time, remember to pull hard when pulling the network cable, it is easy to tear.

Summary: The above is about how to connect the network cable is not long enough, and what matters to pay attention to when pulling the network cable at home, I hope the content shared can give you some reference code, Maessen wants to know more about relevant knowledge, you can **** Qijia information.