How to solve the system print service exception?

1. Turn off the printer first;

2. Win+R brings up the run, and enters.

point OK, run the service program;

3. The service dialog box pops up;

4. Just one first and then press p, you can quickly find the service that starts with p, find the print spooler service right click, click to stop;

5. Be sure not to close the service window;

6. Turn on the printer and refresh your print job, clear the print job, open the original service window, and find the print spooler service;

7. Right-click to start;

8. The printer will return to normal.

Hello, first of all, it is recommended that you install a good anti-virus software, upgrade and restart the computer, check for computer viruses, and clean the registry and junk. At present, there are 360, QQ Computer Manager, Kingsoft Antivirus, etc., you can choose any one to use. Of course, it would be even better if you could detect and kill viruses in safe mode.

If there is no virus, open the Device Manager to observe whether there is a problem with the printer's driver, if there is a problem, please reinstall the printer driver, or use the driver wizard to type the printer's driver. In addition, it is recommended that you plug and unplug the interface and reconnect the printer.

If the problem does not work, it is recommended that you use a USB flash drive to redo the operating system. Of course, if you have a genuine system, give an official call to the maintenance department, and they will tell you how to restore your genuine operating system. After the system is restored, it is recommended that you reconnect the printer and reinstall the printer driver.

If that doesn't solve the problem, there is a problem with your printer's hardware. It is recommended that you take the machine directly to the official maintenance department, or ask the master to help you repair it.

First of all, update the print driver, if it still doesn't work, delete the printer and add it, it's best to restart the computer and the printer.

When we use the printer, we often encounter some more or less problems, such as such a problem that plagues many people, that is, the printer configuration is abnormal, resulting in the printer can not print. So how to solve the printer configuration abnormality? Next, I will bring you the solution to the abnormal printer configuration.

Here's how:

1. Right-click the start button and select the menu item to run in the pop-up menu.

2. Next, enter the command in the open run window, and click the OK button to run the command.

3. Find the service item of Print Spooler in the service window that opens.

4. Right-click the service item and select the menu item of Properties in the pop-up menu.

5. Next, click the launch button in the opening window.

6. Then click the startup type drop-down button to select the automatic menu item.

1. If there is a problem with the data cable, replace the data cable.

2. If there is an error with the driver, reinstall the driver.

3. The print port is wrong, and the print port is set again.

4. If the printer is powered on for too long and there is an unknown error inside, turn off the power and restart.

5. There is a problem with the network. (Network Printer).

The local print post-handler service is not started, how to deal with it, and the following solutions are used.

2. Change to a large icon interface, and double-click the management tool.

3. On the new interface that pops up, select the service and double-click.

4. Then double-click Print Spooler on the new interface.

5. Finally, in the window that opens, select the startup type Automatic, click Apply, and OK to solve the problem.