How to remove the battery of the mobile phone, how to remove the battery of the mobile phone

1.First, find the "notch" on the side or bottom of the back cover of the phone, pick the back cover outward with your fingernails, and take out the battery.

2.When installing, first align the battery contacts with the battery slot contacts and put them in, and press the back cover slightly hard around it.

There are two kinds of mobile phone battery installation: one is the mobile phone battery installation of the all-in-one machine, and the other is the mobile phone battery installation that we commonly use that can be folded and removed. Of course, the first one requires the use of professional tools for professional dismantling.

The other is simple, open the back cover of the mobile phone battery, then install the battery, and then close the lid and it's OK.

Disassemble the cover on the motherboard, connect the battery to the motherboard and have a cable to open it. Generally, there is glue under the battery, and it can be warped out carefully. Be gentle so you don't break other parts.

Steps. The first step is to find the two five-pointed stars on both sides of the phone's charging port.

Screw. To turn on the iphone6, you just need to unscrew these two screws;

Step 2: Turn off your phone and use the pentagonal screwdriver in your kit.

Unscrew the screws. The head of the screwdriver is small, but it matches the small screw at the bottom of the iphon6.

Step 3: Use the suction cup to pull out the screen above the home button. Hold the suction cup directly above the home button, hold the body with your other hand, and pull it out. You just need to pry open enough space between the screen and the body to fit in a plastic sheet.

Fourth, use a pick to pry out the screen. Start with the home button and pry upwards around the screen little by little.

Step 5: Hold the screen up at 90 degrees, but not more than that. The top of the screen is still attached to the body, so don't pull too hard. As you can see, you'd better be able to hold the screen up at 90 degrees.

Step 6: Hold the screen up at 90 degrees, but not more than that. The top of the screen is still attached to the body, so don't pull too hard. As you can see, you'd better be able to hold the screen up at 90 degrees.

Step 7: Locate and unscrew the screws that hold the screen wired in place. It's a good idea to remove the screen when removing the battery, as the battery is secured with glue and it can be a hassle to remove it. Unscrew the screws on the protective cover, and then remove the protective cover as well.

Step 8: Disassemble the connector of the screen. There are several connectors between the screen and the body, and you can pick them out of the port with a small pick or a thin nail file.

Step 9, Remove the Battery Connector Protective Cover. The battery connector cover is secured by two screws, unscrew them off, and then remove the metal cover as well.

Step 10: Disassemble the battery connector. There is only one connector between the battery and the circuit board, which you can pick apart with a small pick or a thin nail file.

The eleventh step is to use a hair dryer.

Heat the back cover and blow the glue soft. The iPhone 6 uses a lot of glue to hold the battery, and they need to soften to remove the battery. You can use a hair dryer to heat the back cover of your phone to soften the glue.

Do not use a heating tool with a higher temperature than this, and use the heating to be comfortable to hold the phone in your hand.

After unplugging the charger with a full charge, it reduces the power by dozens of times? If so, it's worth reading today's article, because I'll tell you how to replace your phone's broken battery without having to pay for it at a repair shop.

Nowadays, the function of the mobile phone can be said to have reached its peak, it is because the function of the mobile phone is too strong to cause people to live without the mobile phone, the frequent use of the mobile phone on the mobile phone battery requirements are high, some mobile phone addiction friends may charge several times a day, some people root the mobile phone charger will always be plugged in and not unplugged at all, which will increase the aging speed of the battery and reduce the life of the battery, especially in winter, due to the battery life and design of the mobile phone battery storage is getting worse and worse, I want to change the battery and worry about the high level of the repair shop, so I can also accept the ** of the battery on the Internet, but the problem is that I won't change it. In fact, the current mobile phones are modular assembly,Disassembly is very simple,Generally, after the two screws at the tail are removed, either the screen assembly is taken down or the rear cover plate is removed,This step is basically disassembled,The place that stumps everyone is basically not to remove the old battery on the original machine。 Apple mobile phones are used more and the difficulty is relatively large, today we will take Apple mobile phone battery replacement as an example.

The mobile phone battery that needs to be replaced has three or two adhesives on it, we don't need to disassemble it violently, we only need to pull the adhesive on the battery outward according to the picture drawn, and the battery will be successfully removed after all three tapes are pulled. The attention here is not to violently pull the adhesive off, when the bad battery is removed, and then put the original adhesive strip on the new battery, so that the next time you change the battery, the method is as easy to remove, and the new battery is ready to be pasted with adhesive.

Then turn the new battery over and attach three adhesive strips.

After the new battery is ready, install the new battery into the mobile phone, press the battery down firmly, and install the battery after everything is ready. The above is the most important step to change the battery of your mobile phone, so that you can buy the battery yourself online and replace it yourself. Remember to have moderate strength, don't use brute force.

<>1. We all know that mobile phone disassembly must require mobile phone disassembly tools, so the first one is to prepare a set of disassembly tools. The second is that when disassembling the machine, there will inevitably be some parts, so how to place it, you need to prepare a box to put the parts.

2. Now the mobile phone is basically engaged in an integrated design, if you want to replace the battery of the mobile phone, we should first take out the mobile phone card slot in the mobile phone, and then remove the back cover of the mobile phone through the disassembly tool (shrapnel and adsorption tool), pay attention to the connection of wires on the back shell.

3. After the back shell of the mobile phone is removed, remove some of the boards on the mobile phone motherboard that affect the replacement of the mobile phone battery, such as the motherboard and camera, and pay attention to disconnect the mobile phone power first when disassembling these parts.

4. After the other influence boards on the mobile phone motherboard are removed, the saved is basically the battery, find a card, insert it into the mobile phone battery, and pull the mobile phone battery out from the side little by little, pay attention to the glue under the mobile phone battery.

5. After the mobile phone battery is removed, re-install the newly bought battery, and then install the parts in order, and then the battery can be replaced when the replacement is completed, and the replacement can be turned on for testing.

--- it's actually not that difficult:

How to change your phone's battery Learn these 5 steps and you can change it yourself.

1. Disassemble the back cover: Before disassembling the phone, be sure to turn off the mobile phone first to avoid accidents. You should first take out the mobile phone card slot in the mobile phone, and then use the suction cup, suck the upper part of the mobile phone, and slowly pull it apart.

2. Remove the mobile phone board that affects the replacement of the battery: After the back shell of the mobile phone is removed, remove some of the boards on the mobile phone motherboard that affect the replacement of the mobile phone battery, such as the motherboard and camera, and pay attention to disconnect the power supply of the mobile phone first when disassembling these parts.

3. Remove the old battery: There are generally two white easy-to-pull glues under the battery, and you can remove the battery after pulling it apart, if you still can't take it off, find a card, insert it under the mobile phone battery, and pull the mobile phone battery out from one side little by little.

4. Replace the new battery: install the newly bought battery, and then install the parts in order, then the battery can be replaced when the replacement is completed, and the replacement can be turned on to see if the battery is installed and can be charged.

5. Install the back cover: Tear the waterproof adhesive protective tape on the back cover of the mobile phone, first align the front half with the fuselage, and then slowly glue the back cover to the fuselage and flatten it, and then use a hair dryer to heat it up to ensure a better bonding effect. If you just replace the battery, some of the sealant will lose its adhesion or be damaged during the disassembly process, in order to ensure the rugged performance after assembly, it is best to buy and reseal a new circle of sealant in advance.

If you are using a Huawei phone and you want to replace the battery of your phone, it is recommended that you back up the data in your phone in advance (third-party apps such as QQ and WeChat need to be backed up separately) and bring the warranty certificate to a nearby Huawei customer service center for repair.

Make an appointment for service. Huawei Customer Service Center.

Boarding service.

If it is a separable kind of mobile phone, it has a matching charging equipment, and it can also be charged with a universal charger clip.

A battery is a device that converts chemical energy into electrical energy in a cup, tank, or other container or composite container that contains an electrolyte solution and metal electrodes to generate an electric current. With the advancement of science and technology, batteries generally refer to small devices that can generate electrical energy. Such as solar cells.

The performance parameters of the battery mainly include electromotive force, capacity, specific energy and resistance, using the battery as energy, you can get a current with stable voltage, stable current, stable power supply for a long time, and little influence from the outside world.

And the battery structure is simple, easy to carry, simple and easy to charge and discharge, not affected by the external climate and temperature, stable and reliable performance, and plays a great role in all aspects of modern social life.

Charging requirements: For the "activation" of lithium batteries, many people say that the charging time must exceed 12 hours, and the full charge and discharge must be done three times in order to activate the battery.

This "the first three charges to charge more than 12 hours" statement, is for the 90s of the last century rechargeable battery, the kind of nickel-cadmium battery has a memory effect, need to be fully charged to ensure battery capacity, mobile phones are used lithium-ion batteries, it has no memory effect, generally 2-3 hours can be fully charged, full is enough.

Taking the Apple 6 mobile phone as an example, it can be disassembled through the following steps:

Tools: iPhone, pentagonal screwdriver, triangular sheet.

If you are using a vivo mobile phone, you can bring your mobile phone and purchase voucher to the customer service center for processing, customer service center address: enter vivo official website vivo**app - my - service outlets or vivo official website web version - bottom - service support - service outlets query - select provinces and cities to query the address of the customer service center. It is recommended to contact ** in advance before going to avoid empty running, plan the itinerary reasonably, and travel safely.

To change the battery of a mobile phone, you have to go through the following steps of disassembly and assembly:

First, to remove the outer cover of the mobile phone, you need to use a suction cup, and be careful when dismantling, otherwise the cover will be broken.

Second, after removing the outer cover, you have to remove the inner cover, and you have to remove several screws.

Third, remove the battery interface, remove the battery, this is also laborious, and there is double-sided tape glued inside.

Fourth, replace the battery with a new one, and stick double-sided tape tightly.

Fifth, screw back the screws, install the cover, and finally complete the disassembly.

To sum up, you said that users have to waste so much labor in order to change the battery, and it takes so many steps to disassemble and assemble, although now the mobile phone has a lot more software functions than before.

For mobile phones with replaceable batteries, changing the battery is very simple, as long as you buy the appropriate mobile phone battery, and then turn off and open the back cover of the mobile phone, you can complete the replacement, for the mobile phone with a non-replaceable battery, you need to go to the local mobile phone brand after-sales service center, and the battery will be replaced by professionals.

Just open your phone's battery cover and you're good to go.

Because the current mobile phone is basically integrated, it is necessary to disassemble the device along the edge of the mobile phone, and then remove the pressure strip, and you can do it.

Today's mobile phones basically have built-in batteries, so there is no way to replace them, only to send them to a repair shop, and then use professional equipment to disassemble and replace them.