Very hard and thick scale removal tips, very hard and thick scale removal tips?

1. Fill the kettle with water first, then add lemon slices and heat it, about 10 minutes, and use a brush to scrub the kettle, which can be easily removed.

2. You can also use baking soda and white vinegar, because these two substances can effectively soften the scale, add a little water to the kettle, add two spoonfuls of white vinegar, and a spoonful of baking soda, boil the water, let it stand for half an hour and then use a brush to scrub it, and the scale inside will be easily removed.

3. If you can't find baking soda, white vinegar or lemon slices at home, you can also try its practical toothpaste. Applying the toothpaste directly to the limescale and then wiping it with a clean rag or gauze can also remove the scale.

How to remove limescale from water pipes

1. The material of some water pipes is easy to produce dirt, and the scale in the pipe is getting thicker and thicker, which will affect the drainage, which is likely to cause the water flow to be relatively small after turning on the faucet and shower. In this case, we can pulse cleaning by pickling, which uses water as the medium to slowly peel off the scale to achieve the purpose of cleaning.

2. It can also be put into the pipeline through self-made methods, such as edible vinegar and lemon, which can also avoid dirt in the pipe. Because white vinegar can effectively dissolve limescale, the effect of removing dirt is still very good. In addition, starch is also very effective in removing dirt, it can act as a sticking effect, and can quickly remove the scale.

3. You can also directly buy a special solvent to remove dirt on the market, the ingredients in it are relatively gentle, and will not affect the material of the pipe.

Kettles and other kitchen utensils for boiling water should now be available in every house, and it is fast and convenient to use it to boil hot water, and this electric kettle is generally not expensive, and it is not distressing to buy one. However, since the kettle has advantages and disadvantages, it will slowly start to have problems after it has been used for a long time. Electric kettle because of the long-term use of boiling water, so at the bottom of the kettle will accumulate a thick layer of scale, if not cleaned for a long time, these scale will enter our body by boiling water, will have a certain harm to health, in addition when the kettle appears scale, its heating speed will also slow down, so it will consume more electricity.

If you want to get rid of limescale quickly, Huahua has a little trick to use these 3 things.

1.White vinegar White vinegar is a common condiment at home, but its role is not only for seasoning. Because white vinegar is acidic, it is naturally corrosive, we use it to clean scale can get good results, in addition to white vinegar also has the function of sterilization and disinfection, which can ensure the health of boiling water.

When we use white vinegar to remove limescale, we only need to mix some in the water and then boil it in the usual way, so that the scale will slowly dissolve and fall off in it.

2.Sodium bicarbonate. Since we talk about white vinegar, we can't fail to mention baking soda, baking soda is a good thing to clean at home, because it is a strong alkaline substance, so it can react with the scale in the kettle when it is used, and then it can play a cleaning role.

The method of using baking soda to remove scale is similar to white vinegar, which is to dissolve the baking soda in water, and then put it in an electric kettle to boil, and the simple effect is very good!

3.Potato. The above two cleaning methods work very well for kettles with thick limescale, but if the kettle at home has a thin limescale, we can use the potato cleaning method.

Potatoes are known to contain sufficient starch inside, which can effectively remove the limescale when cleaning. We cut the potatoes into thin slices, then put them in an electric kettle and add water to boil, so that the starch in the potatoes will slowly react with the limescale and play a cleaning role.

These 3 small things all have strong cleaning power, and they are very good for cleaning limescale.

To remove very hard and thick limescale, you can use vinegar and baking soda.

The common methods are as follows:

Tools required: toothbrush, vinegar, baking soda.

1. Pour some vinegar on the yellow dirt in the wash basin, sprinkle some baking soda on it, and soak it for a while.

2. Then use the usual discarded toothbrush to brush repeatedly in the area with yellow dirt.

3. After brushing, rinse with water, sprinkle some baking soda on the yellow dirt that has not been brushed off, and then scrub vigorously with a toothbrush, do not sprinkle baking soda in a large area, where there is yellow dirt sprinkled in which place, while scrubbing, sprinkle some baking soda, and repeat the operation.

4. After cleaning with water, there are still some yellow scales that have not been brushed off.

5. Squeeze some toothpaste on it, and then brush it with a toothbrush, it will also have obvious effects.

6. After thoroughly brushing off the yellow scale, rinse it with water, and then wipe it dry with a dry rag.

7. In this way, the dirt can be removed.

Very hard limescale removal trick, simple and practical.

If the kettle has a very hard and thick scale, you can use lemon slices to remove it, first fill the kettle with water and put in the lemon slices, then heat it, wait until the water boils and pour it out, and then start to scrub the kettle. To clean up very hard and thick limescale, you can add baking soda to the water and bring the water to a boil, after which the limescale can be easily removed.

Very hard and thick limescale removal method

1. Lemon slices

nbsp;If the kettle has a very hard and thick scale, you can use lemon slices to remove, fill the kettle with water and put it into the lemon slices, then heat it, leave it for 5-10 minutes and pour out the water in the bar, and start to brush the kettle, the scale in the kettle will be easily removed.

2. Baking soda and white vinegar

nbsp;When cleaning up very hard and thick scale, you can add two spoons of baking soda vinegar to the water, then boil the water, let it stand aside for about an hour, pour out the water, the hard and thick scale becomes soft, and the scale that is difficult to wash off can be easily removed when cleaning.

3. White vinegar

If the electric kettle has a very hard and thick scale, you can pour in edible vinegar, pick up the electric kettle and shake it, let the place with scale soak the white vinegar, and leave the electric kettle for about 20 minutes to remove the scale, in order to avoid residual scale, you can rinse it with clean water.

Here's how to remove very hard limescale:

1. Vinegar to remove scale.

Pour vinegar (black vinegar and white vinegar are acceptable) and boiling water into the kettle at a ratio of 1:10, let the water fully submerge the scale wall, and then let it stand for more than half an hour before cleaning the kettle, at this time you will find that the scale has naturally fallen off.

2. Baking soda removes limescale.

Put 1 teaspoon of baking soda in a high rock kettle, then pour the water and bring to a boil for a few minutes, at which point you will notice that the limescale gradually dissolves. Or directly use the mixture of baking soda with a high degree of conliminence to gently rinse the kettle, which can also remove the scale.

3. Lemon descale.

Slice the lemon, then put it in a kettle with scale, add cold water to boil (or pour boiling water directly), and let it stand for more than half an hour to remove the scale.

It is important to know that the main component of lemon is generally citric acid, which is a weakly acidic substance, which will have a certain chemical reaction with scale under heating, which will cause the scale to fall off, so as to achieve the purpose of removing scale. The principle of limescale removal for lemon and vinegar is actually the same.

Vinegar cleaning steps

Pour 200 ml of white vinegar into a bowl.

Soak a paper towel or soft cloth thoroughly.

Then wrap a paper towel around the limescale faucet and let it sit for 30 minutes.

White vinegar can dissolve limescale, and after 30 minutes, uncover the paper towel.

Then rinse with clean water and wipe off the water stains.

1.Use a vinegar and baking soda mixture: Mix the vinegar and baking soda into a paste, then apply it to limescale, let it sit for a few moments, and wipe it with a brush.

2.Use acidic cleaners: There are many acidic cleaners available on the market that can remove limescale, such as hydrochloric acid, nitric acid, etc.

However, it is necessary to wear gloves and masks when using them to avoid causing harm to the ** and respiratory system. 3.Use citric acid:

Dissolve the citric acid in water and apply it to the limescale and let it sit for a while before wiping it with a brush. 4.Use a professional limescale cleaner:

There are also some professional limescale cleaners on the market that can be used according to the product instructions.