How to remove limescale stones in the sewer, how to remove limescale in the toilet sewer

Scale is generally alkaline, can be neutralized with acidic liquid, soften off scale, to remove, generally can be used white vinegar, edible vinegar, can be, because vinegar is relatively acidic.

You can pour a small amount of warm vinegar water into the sewer, pour slowly, little by little, let the scale on the sewer pipe slowly soften and eliminate, after pouring the vinegar, suddenly rinse it with large water to try.

To remove dirt from the toilet drain, you can choose to use toilet cleaner and 84 disinfectant.

But since it has some corrosion to iron, be sure to rinse it several times.

Precautions for using toilet cleaners:

1.Many toilet cleaners mainly rely on hydrochloric acid to remove urine alkali, and hydrochloric acid has a strong corrosive function of dredging sewers, so contact should be avoided as much as possible when using toilet cleaners**. In case the toilet cleaner is spilled on the **, rinse with clean water.

2.Toilet cleaners are generally corrosive, so they should not be used on non-porcelain surfaces such as wood floors, cement floors, marble and aluminum.

3.Toilet cleaners should not be used at the same time as other detergents.

4.In view of the fact that some toilet cleaners were found in this test.

There are almost no anti-corrosion measures, and it is highly corrosive, so it is recommended that you rinse it several times when using Toilet Cleaner.

Formation of sewer dirt:

1. Due to the long-term accumulation of sewers: vegetable oil, animal fat, manure and other viscous flows into the pipeline and sticks to the inner wall of the pipeline, forming scale; Hair strands, rags, decoration residues, iron bacteria, microbial reproduction, and the formation of scales on the inner wall of the pipeline. The emission of the above objects is undoubtedly an important cause of fouling, and with the prolongation of the existence of the building, the circulation is not smooth or the blockage is aggravated.

2. Backward cleaning methods: the traditional methods to solve the blockage problem, bamboo dredging and dredging machine dredging, the above two means can only solve a small part of the sewage in the pipe, but can not fundamentally solve the blockage problem.

In our daily life, the kitchen and bathroom consume a lot of water, if the sewer is blocked and the drainage is not smooth, it will directly affect daily life, many friends want to dredge the sewer by themselves, but they don't know the method, the following credit family will tell you, how to remove the narrowing and scaling of the bathroom sewer, and how to deal with the stones on the sewer wall.

How to get rid of the narrowing of the toilet drain and the scale.

1. Water pressure dredging method:

How to get rid of the narrowing of the toilet drain and the scale.

If it is just a small object caused by a blockage of the toilet drain, it is easy to solve, and the impact of water pressure can be used to flush away the small object and unclog the pipe. It is recommended that you first plug the other gaps in the sewer outlet, then connect the faucet and the sewer outlet together with a pipe, then turn on the faucet and adjust the water volume to the maximum for a few minutes.

2. Acid-base reaction method:

If there is a serious blockage in the bathroom sewer pipe, which cannot be solved by physical methods, then there is only a real thing. First prepare baking soda and vinegar, mix baking soda and vinegar in a ratio of 1:2, stir well, then slowly pour in an appropriate amount of water, stir well again, pour it into the blocked sewer pipe, wait for a while, wait for the foreign matter in the sewer pipe to be dissolved, and then rinse the sewer mouth several times with water.

Here is a reminder to everyone that when using this method, you must wear rubber gloves and masks to avoid unnecessary trouble in the process of dredging.

3. Wire dredging method:

How to get rid of the narrowing of the toilet drain and the scale.

Clearing the drain with wire is also a very common method, especially when the drain is clogged by hair, using wire to deal with it is the best way. After all, girls will lose their hair more or less when they wash their hair, and some of the hair will stick to the inner wall of the sewer when the hair rushes into the sewer, and it will be clogged after accumulation. At this time, we find a wire, break one end of the wire into the shape of a hook, and put the wire into the sewer to pull out the blockage.

If there is no wire at home, you can also find some long strips to replace it, which can also play a role in dredging.

4. Pipeline dredging agent:

If you feel that unclogging the sewer is dirty and tiring, it is quite convenient to buy some pipe unclogging agent. It is most suitable for dredging blockages caused by various organic substances such as grease, hair, vegetable residue, paper cotton fibers, etc., and at the same time, it can also remove the foul smell of the pipeline, kill the bacteria and parasites of the pipeline.

How to use: How to deal with sewer wall stones.

1. Take out about 40 grams of dredging agent and pour it into the sewer, add 1 kg of water, wait for about 10 minutes, and wait for the pipeline dredging agent to fully react;

2. Pour another 40 grams, add 1 kg of water, and wait for 10 minutes;

3. Wait for 20-30 minutes, and flush with a large amount of water to dredge.

Depending on the blockage, the specific dredging method is different.

We're happy to answer for you! How to remove limescale from toilet sewer 1Vinegar bubbles:

To remove limescale from bathtubs, walls and faucets, soak a cloth in vinegar and leave it on top of the grime overnight. The next morning, mix the baking soda and vinegar into a paste, then use a toothbrush dipped in the paste to scrub the area and clean it. 2.

Old newspaper wipe: Wipe the bathtub with old newspaper to remove old dirt, or you can use a clean cloth or brush dipped in some decontamination powder to gently wipe it, and then rinse it with water. 3.

Special cleaner: If you don't care about the cost, use a special bath cleaner! It can not only effectively remove the common soap scale and scale on the surface of the bathtub, but also the organic Chen Ling old yellow scale that is difficult to remove, saving time and effort, and there is no damage to the surface of the bathtub.

4. Use a small steel wool ball to dip some used waste vegetable oil (such as peanut oil left over from frying), then squeeze some toothpaste on it, and wipe the limescale place! Rinse it out with water! Thank you.

1. Sewer dredging agent: It is the best product on the market at present, and this product has a good effect on the noisy and filial blockage caused by hair, greasy, paper towels, etc. It is used to dredge blockages such as washbasins, wash basins, floor drains, toilets, etc.

It does not damage sewer pipes, including PVC pipes, and the use method can be used according to the above instructions. 2. You can use the support handle of the home to aim at the sewer mouth, and then put the water in the semi-land pool, and the toilet can also be opened under the action of suction and pressure. 3. Go to the market to buy a special pitot for toilets, aim at the sewer and touch the mountain crossing early, pound hard, and under the action of suction, the toilet can also be passed.

4. Put caustic soda into the sewer mouth, and then pour a pot of boiling water into it, which is generally not a serious blockage that may solve the problem. 5. Get some baking soda powder and vinegar, and use the acid in soda and vinegar to react to remove the alkali scale in the pipeline. In this way, toilets and sewers can also be accessed.

Poor sewer lead dirt stones refer to a thick layer of stone matter formed in sewers due to the accumulation of sewage and other substances. These stones can seriously affect the efficiency of the sewer in terms of drainage, and may even lead to a clogged sewer. Therefore, it is important to treat sewer dirt stones.

The first step in solving the problem of sewer dirt stones is to thoroughly understand the problem itself. The cause of the formation of sewage dirt stones is the accumulation of sedimentary material in the sewage in the pipes. These substances include oils, fibers, sediment, bacteria, and minerals, among others.

Dirt stones can also cause odors and other sanitation problems in sewers.

The way to deal with sewer dirt stones can be in the following ways:

1.Chemical Cleaning Method: Adding professional cleaners, such as potassium hydroxide and copper, to sewer pipes can break down and eliminate dirt in the pipes, thereby reducing the accumulation of dirt and preventing the formation of stones.

However, the use of this cleaner requires careful operation to prevent damage to equipment and pipes.

2.High-pressure flushing method: In the sewer, a high-pressure water flow is used to forcibly flush the inside of the pipe to remove dirt and stones inside and outside the pipe. This method can quickly rule out stones.

3.Mechanical cleaning method: through manual or mechanical equipment, clean up the heavily blocked sewer stones, and scrape off the dirt attached to the pipe without affecting the pipeline. This method is suitable for dealing with very thick sediments.

For pipes with long-term dirt and stones, regular maintenance and cleaning are required to ensure that the pipes are unblocked and clean. When using chemical cleaning agents, the required dosage should be followed to avoid causing harm to people. Stress pants should be selected with an experienced professional company or technician for operation and maintenance.

Therefore, dealing with sewer fouling stones requires a method and systematic process to ensure cleanliness and safety. By regularly maintaining and cleaning the pipes, while complying with safety regulations and operating guidelines, the formation of sewage dirt stones can be effectively reduced, the operational efficiency of the sewer system can be guaranteed, and the environment can be kept clean.