Greasy clogged kitchen drains, is there any way to solve it?

Greasy clogged kitchen drains, is there any way to solve it?

1. Pour hot water directly, because the pipe is blocked by some oil, hot water can effectively dissolve the oil, directly boil a pot of boiling water, quickly pour it into the sewer pipe, and the dissolved stains can be dredged. Dredging can also be carried out by pumping water, which is directly fed into the sewer with a pump hose, and then continuously pumped and poured water, which can also play a certain role. Diameter 10 mm, about 1 meter long plastic pipe (or rubber tube), one end of the faucet tight, the other end of the pool plugged, with a rubber cloth tube, put the pool outlet, open the faucet, the screw is large, the water pressure is enough to wash off the blockage.

2. Increase the water pressure through the water pressure, connect the faucet and the sewer pipe with a plastic pipe, open the faucet to the maximum, continuous irrigation, and through high-pressure water flow, it can play a role in dredging. If it still doesn't work, a combination of unclogging agents should be used to effectively dissolve the dirt. Both baking soda and white vinegar dissolve stains quickly.

In addition, it can be diluted with hydrochloric acid and poured down the drain. Dilute carefully, otherwise it is easy to corrode the inner wall of the pipe. Not only does it unclog it, but it also acts as a disinfectant.

If it doesn't work, the ultimate solution is to disconnect the pipe interface and remove debris from the inner wall of the pipe to solve the blockage problem at the root.

3. How to prevent kitchen sewer oil from clogging? Clean kitchen drains regularly with boiling water and laundry detergent. How to use:

Boil a pot of boiling water, add laundry detergent and wash it down from the sink together, which will melt more of the pipe wall oil, and the sink has a similar funnel to filter the larger residue, try not to take it off. Extend the time of tubing blockage.

4. Bathroom sewer, toilet is generally connected with toilet and washbasin, washbasin and toilet sewer blockage causes hair loss, bathroom sewer blockage is the user carelessly, or does not pay attention to the toilet sewer as a trash can, everything is thrown in. When you're combing your hair, try to clean your hair instead of flushing it down the drain.

1. Boiling water. Flushing the sewer with boiling water is using hot water to melt the oil that remains on the wall of the sewer pipe. 2. Baking soda and boiling water.

After the baking soda and the oil ester of the sewer have fully reacted, pour it with boiling water, and it is basically dredged. 3. Pipeline dredging agent. Insert the dredge into the sewer and clean the oil stain from the sewer by rotating the dredger, and the sewer is basically unclogged.

You can sprinkle some baking soda and vinegar, so that you can wash away the greasy things, you can also use rice water, or you can directly pour hot water, which can effectively dissolve the oil stains, and can also be solved by pumping and dredging.

You can buy a pipe dredging agent, and then you can also ask a professional sewer master to pass it, you must be careful when you usually use it, don't pour greasy food into the pipe, you can pour hot water directly into the pipe, you can pump up the dredging, you can increase the water pressure.

You can sprinkle some baking soda or some vinegar on it, you can also pour it with hot water, or clean it with professional grease stain remover, you can also use iron wire to poke it open, or you can put an oil filter on it.

In this case, you can first use hot water for rinsing, or use professional sewer items to carry out, if it is more difficult, you need the help of professionals to solve it, or use some professional utensils to remove the greasy substances in the sewer, and then clean.

1. Rice washing water, baking soda.

Rice washing water has a strong decontamination ability, and when used with baking soda, the cleaning effect will be doubled.

The method is to add a small amount of rice washing water and an appropriate amount of baking soda, mix well, pour it into the drain, and wait for 10 minutes to see the effect.

2. Laundry detergent.

Laundry detergent not only has the ability to remove stains, but also dissolves oil stains.

Method: Add an appropriate amount of laundry detergent to three cups of hot water, add a little vinegar, mix and pour into the drain.

3. Round wooden sticks.

In addition to using chemical principles to solve oil blockages, it can also be solved by physical means.

Find a stick that is slightly smaller than the diameter of the drain, tie a towel, put some water in the sink, and quickly pump the stick up and down to poke the garbage and oil clogged in the drain and the kitchen drain will be unblocked. And it can not only solve the problem of oil pollution, but also if the sewer is blocked by solid objects such as bones, it can also be solved by this method.

Ways to prevent sewer blockage:

1. You can install a filter screen device at the drain of the sink and clean the filter screen frequently.

2. Before washing the tableware, it is best to remove the grease and leftovers from the tableware, wash it with warm water, or pour it directly into the trash.

3. When the weather is cold, the grease on the tableware will solidify, and it is very likely to adhere to the sewer pipe wall.

4. When using the kitchen sink, if you want to clean more tableware, vegetables and fruits, remember to fill the water in the sink, and after cleaning, the dirty water in the sink should be put away at one time, so that a certain impulse will be formed to wash away the dirty things in the sewer, and the oil stain on the sewer pipe wall is not easy to form.

The kitchen drain is always blocked, it turns out that it is because of grease, how to solve it.

Answer 1, directly pour hot water, because the pipe is blocked by some oil, hot water can effectively dissolve the oil, directly boil a pot of boiling water, quickly pour into the sewer pipe, the stain can be dredged when dissolved. 2. It can also be used to pump and dredge the method, with a pump hose directly into the sewer mouth, and then continue to pump and pour water, which can also play a certain role. 3. Through the water pressure, increase the water pressure, connect the faucet and the sewer pipe with a plastic pipe, open the faucet to the maximum, continuously fill the water, and through the high-pressure water flow, it can play a role in dredging.

4. If the above methods still do not work, it is necessary to use a combination of dredging agents to effectively dissolve the dirt. Baking soda and white vinegar are both able to quickly dissolve stains. In addition, it can also be diluted with hydrochloric acid and poured into the sewer, pay attention to be diluted, otherwise it is easy to corrode the inner wall of the pipe.

Not only can it be dredged, but it can also play a disinfection role. 5. If there is no effect, the ultimate method is to disconnect the connection of the pipeline interface and remove the debris on the inner wall of the pipeline, so as to solve the blockage problem from the root.

What is the best way to remove oil when the kitchen drain is clogged with oil? Clogged kitchen drains are a common problem, and here are five ways to solve them and win.

1. Boiling water. The main cause of clogged kitchen drains is because of clogged grease, so you can use boiling water to flush the drain and melt the oil remaining on the drain wall. Be sure to prepare enough boiling water to assist in cleaning with dish soap.

2. Baking soda + boiling water.

Baking soda is alkaline when dissolved in water, which can melt the grease in the oil. Therefore, you can take an appropriate amount of baking soda and pour it into a pot filled with hot water, and then pour the baking soda water into the sewer continuously and slowly, wait for a few minutes, and wait for the baking soda and the oil in the sewer to fully react, and water it with boiling water, which can be well dredged.

3. Pipeline dredging agent.

Pipe dredging agent is a material specially designed for sewer blockage, which can dissolve the oil stain problem in the sewer well, and is sold in major supermarkets and **.

4. a dredger.

If the blockage is severe, you can choose to do it with a dredging device, insert the unclog into the drain, and then unclog the drain by rotating the unclogging.

5. Professionals.

In many cases, the blockage of the kitchen sewer is not simply a blockage of oil, but a blockage of food residues, so it is difficult to solve this problem with the above methods, so a professional master needs to open the drain for dredging treatment.

A1Baking soda + boiling water Pour baking soda directly into the sewer, dissolve the baking soda with the water in the sewer, and after a few minutes, after the baking soda and the oil ester of the sewer have fully reacted, pour it with boiling water, and it will basically be dredged. 2.

Pipe dredging agent If the method of boiling water and baking soda still cannot dredge the sewer or the dredging result is not ideal, you can also choose to buy a special pipe dredging agent, which has a variety of ingredients that dissolve the oil. 3.The special dredge inserts the dredge into the sewer, then adds an appropriate amount of dish soap, and cleans the oil stain of the sewer by rotating the dredging, and the sewer is basically dredged.

Now it's basically possible to buy. Sewers are a type of urban public facility that has been used as early as the ancient Roman period. The prototype of modern sewers originated in Paris, France, and Paris still has the largest urban sewer system in the world.

Generally speaking, the sewer system is used to collect and discharge domestic wastewater generated in the city and industrial wastewater generated in industrial production. (Urban rainfall is counted as urban wastewater for the time being).

Hope it helps, dear

How to remove the restaurant drain that is clogged with oil.

1. Animal fat blockage: If it is oily, it is recommended to use boiling water, of course, if you can buy concentrated sulfuric acid, the effect is better. If something is clogged, the only thing you have to do is clean the pipes like the one you said upstairs.

2. Cement plugging: 70% hydrochloric acid cannot be found, and 35 are sold everywhere, you can try it. Add a small amount of flour to it to act as a corrosion inhibitor, and it is best to have urotropine. It can reduce the corrosion of steel.

3. Go to the market to spend quick money to buy a 2-meter-long spring wire pipe dredging tool, bend 1-20 degrees at 1-2 cm on its head, dredge it back and forth at the entrance and exit of the sewer, and flush it with water.

Causes of sewer blockage.

1. Dump swill Some restaurants and hotels often operate until the second half of the night, and when people are sleepy and tired, they will inevitably cut corners, and some untreated swill will be dumped directly into small waterways. If there are some solid food residues in it, it is easy to get stuck in the inner wall of the sewer, and it will accumulate more and more over time, and finally solidify into large pieces under the action of oil stains, blocking the sewer.

2. Dumping oil pollution Oil pollution is the nemesis of sewers, because it is not easy to flow away, and it is generally attached to the inner wall, so it is easy to catch other impurities and block the sewer.

3. Foreign objects such as plastics Restaurants and hotels are most exposed to easy-to-absorb items such as plastic bags and convenience boxes, and if one of these things falls into the sewer without paying attention, it is difficult to deal with. Our company once treated the sewer for a restaurant, because a piece of plastic stuck to the inner wall, so the high-pressure water gun was helpless, and finally had to ask the environmental protection to cooperate with the construction to clean it up, and the result was a heavy loss.

Sewer blockage prevention methods.

1. Flush the sewer with a certain amount of boiling water every day, and the amount should be determined according to your own sewage discharge. This method can effectively control the adhesion of oil to the sewer.

2. Insist on diluting a certain amount of alkaline water once a week and pouring it into the sewer to prevent oil from forming lumps.

3. Be sure not to take away the sewer covering net for convenient speed, causing blocky objects to fall into the sewer. At the same time, it also prevents odors from being emitted by food rotting in the sewer.

How to deal with the blockage of kitchen pipes First of all, you can use the following methods;

1.Boiled water. Boil a large pot of boiling water and pour it directly into the clogged pipe; Then store a pool of hot water, and when it is full, pull out the plug and release the water.

2.Boiling water + dish soap.

If boiling water is not effective enough, you can add detergent such as dish soap, laundry detergent or laundry detergent to the boiling water, and then mix a large amount of detergent with boiling water to flush the pipe.

3.Pipeline dredging agent.

The main ingredient of pipeline dredging agent is sodium hydroxide, first pour the dredging agent into the blocked pipe, wait for one to two hours, and then pour in a basin of boiling water, which can basically be solved.

4.Dismantling and cleaning.

The most susceptible area of the kitchen to be clogged with oil is usually the "backbend", because a part of the water is stored in the "backbend" to prevent unpleasant smells. However, kitchen wastewater contains a lot of grease, which slowly accumulates in the "return bend" after cooling, and is easy to clog after a long time.

It stands to reason that under normal circumstances, the oil will not agglomerate, but in the case of narrow pipes, in the case of a colder environment, it may condense, there is no special way, the pipe is insulated, the pipeline is thickened, the sharp bends are reduced, etc., and the water is boiled after the blockage, but this method depends on the location of the blockage.

If it is far away from the drain where you pour hot water, and there is already stagnant water in it, it is not good, you can pass it first, wait for the water, and then pour hot water, pour more, hot water can dissolve oil, but if it is dirty, then hot water is not good, how to get it has to be specifically analyzed.

A modern kitchen is a room where food can be prepared and cooked, and a modern kitchen usually includes a stove (gas stove, electric stove, microwave oven or oven), countertop (sink or dishwasher) and food storage equipment (e.g. refrigerator, freezer).

Throughout the evolution of the kitchen pattern in Chinese history, it depends on the development of productive forces on the one hand, and the local natural conditions and living habits of residents on the other hand. Through the evolution of different periods, the functionality of the kitchen gradually became rational.