How to remove the scale if it is too thick and too hard

The scale of the boiling water bottle is too thick and too hard, and there are the following ways to remove it:1. Take 3ml of oxalic acid and pour it into an empty hot water bottle, tilt the hot water bottle slightly at an angle, shake it to dissolve the scale and pour it out.

2. You can buy scale cleaner to remove, the main scale cleaner is hydroxymalonic acid, which can not only quickly remove scale, but also be safe, non-toxic and environmentally friendly.

3. Take some pumpkin leaves and cut them into pieces of 3 cm to 4 cm square, put them in a bottle, add a little cold water, gently shake the hot water bottle a few times, pour it out and wash it with water.

1. Fill the kettle with water first, then add lemon slices and heat it, about 10 minutes, and use a brush to scrub the kettle, which can be easily removed.

2. You can also use baking soda and white vinegar, because these two substances can effectively soften the scale, add a little water to the kettle, add two spoonfuls of white vinegar, and a spoonful of baking soda, boil the water, let it stand for half an hour and then use a brush to scrub it, and the scale inside will be easily removed.

3. If you can't find baking soda, white vinegar or lemon slices at home, you can also try its practical toothpaste. Applying the toothpaste directly to the limescale and then wiping it with a clean rag or gauze can also remove the scale.

How to remove limescale from water pipes

1. The material of some water pipes is easy to produce dirt, and the scale in the pipe is getting thicker and thicker, which will affect the drainage, which is likely to cause the water flow to be relatively small after turning on the faucet and shower. In this case, we can pulse cleaning by pickling, which uses water as the medium to slowly peel off the scale to achieve the purpose of cleaning.

2. It can also be put into the pipeline through self-made methods, such as edible vinegar and lemon, which can also avoid dirt in the pipe. Because white vinegar can effectively dissolve limescale, the effect of removing dirt is still very good. In addition, starch is also very effective in removing dirt, it can act as a sticking effect, and can quickly remove the scale.

3. You can also directly buy a special solvent to remove dirt on the market, the ingredients in it are relatively gentle, and will not affect the material of the pipe.

Hello, I am happy to serve you and make the following answers for you: 1. First of all, moisten the scale with warm water, and then use a rag to dip the detergent to wipe the scale, and wipe it hard so that the scale can be wiped off; 2. If the scale is too thick and too hard, you can use a rag to dip the diluted vinegar and wipe the scale. 3. If the scale is too thick and too hard, you can use a rag to dip the diluted alkaline water to wipe the scale, the alkaline water is corrosive, and the scale can be corroded; 4. If the scale is too thick and too hard, you can use a rag to dip the dish soap and wipe the scale, the dish soap is corrosive and can corrode the scale; 5. Finally, wash off the detergent with clean water, and then wipe it with a dry rag to avoid damage to the object caused by the residual detergent.

In the face of thick and hard limescale, it is recommended to use baking soda and a brush to remove it. Thick and hard scale generally accumulates for a long time, covering and soaking with baking soda can effectively soften the scale, and the brush can more comprehensively scrub off some stubborn scale that has not been completely softened.

It is recommended to try to remove the scale that is too thick and too hard, ordinary toothpaste generally has a certain dissolving effect on scale, and after the scale is partially dissolved, it can be cleaned with a toothbrush after brushing.

The scale of the kettle is recommended to be cleaned once every half a month or so, try not to let the scale accumulate for too long, too much scale will be more difficult to clean, and the quality of the drinking water will also be affected to a certain extent.

Summary. If the limescale is too thick and too hard, you can clear it by pouring vinegar, lemon slices, and boiling eggs.

If the limescale is too thick and too hard, you can clear it by pouring vinegar, lemon slices, and boiling eggs.

1. Pour the container with scale, and then the object into the vinegar, pick up the container and shake it, let the vinegar soak in the place where there is scale, shake it a few times, and leave the container for about 20 minutes. After 20 minutes, you can find that the scale has begun to fall off, in order to remove the scale more cleanly, you can pour warm water into the container and flood the area with scale. Soak for about half an hour, the longer the time, the better the effect.

After soaking, you can notice that the limescale at the bottom of the container is almost all off, and then you can clean the container. 2. You can also slice the lemon and put it in a container with limescale. If the container can be heated, you can heat the water and leave it untouched for about 10 minutes.

If the container cannot be heated, it can be poured in and start soaking for 20 minutes. The higher the temperature, the better the dissolution. 3. Boiled eggs to remove scale.

The kettle of boiling water is hard and difficult to remove after a long time. If you boil eggs twice with it, you will get the desired results.

The method of removing limescale depends on the specific condition of the scale and the surface on which it is placed. Here are some common ways to remove limescale:1

Vinegar: Vinegar is a common detergent that can be used to remove limescale. Mix the vinegar in proportion with the water, then pour the mixture into the affected area, let it sit for a while and wipe it with a brush or cloth, then rinse with clean water.

2.Citric acid: Citric acid is also an effective way to remove limescale.

Mix citric acid with water into a solution, apply to the surface of the limescale, wait a few moments, then wipe with a brush or cloth, and finally rinse with clean water. 3.Detergent:

There are some specialized detergent products on the market that can be used as directed in the instructions. These detergents usually contain chemical ingredients that are effective in dissolving and removing limescale. 4.

Abrasives: For hard limescale, abrasives can be used to remove them. Use an appropriate abrasive, apply to limescale and wipe with a brush or cloth until the limescale is completely removed.

Please take care to protect yourself and the surface you are treating when removing limescale, follow the instructions for use of the cleaning product, and take care to use appropriate protective gloves and glasses. If limescale is too bad or can't be removed, consider seeking professional help.

Hello, I am glad to serve you and give you the following answers: 1. Reason: Scale is generally due to the fact that water contains a lot of minerals, such as calcium, magnesium, etc., and the temperature in the water is high, which is easy to form scale.

2. Solution: (1) Use acidic detergent: You can use diluted vinegar or lemon juice and other acidic detergents to smear it on the surface of the scale, let it soak for a period of time, and then wipe it with a rag dipped in water to remove the scale.

2) Use alkaline detergent: You can use a detergent such as strong alkaline dish soap, apply it to the surface of the scale, let it soak for a period of time, and then wipe it with a rag dipped in water to remove the scale. (3) Use of organic solvents

You can use organic solvents such as phenol, methanol, xylene, etc., apply it to the surface of the scale, let it soak for a period of time, and then wipe it with a rag dipped in water to remove the scale. 3. Steps: (1) Wash the surface:

Clean the surface of the scale with clean water to remove impurities and dirt on the surface; (2) Apply detergent: according to the hardness of the scale, select the appropriate detergent and apply it to the surface of the scale; (3) Soaking: let the detergent soak on the scale surface for a period of time so that the detergent can play a role; (4) Wipe:

Wipe the limescale with a rag dipped in water to remove the scale; (5) Cleaning: Wash the surface with clean water and clean the detergent left by the residual locust bucket to avoid residual contamination of the surface.