Regarding the problem of connecting the S terminal to the TV, how to connect the S terminal of the c

The S terminal only transmits images, not sound. You can connect the audio and TV again, and you're good to go.

Also, connect the audio output of the laptop to the input on the TV.

The main reasons are:

1. If there is a problem with the sound setting of the TV or connected device and there is no sound, you can try to increase the volume according to the corresponding remote control.

2. It may also be caused by the quality of the connection line or the poor contact of the interface, you can reconnect the connection line with another connection and try to plug it in.

3. It is also possible that there is a problem with the current ** program source and there is no sound, for example, the program is originally a silent program; In this case, you can change to other electrical channels for testing.

4. Or if there is no sound due to the hardware failure of the TV or terminal equipment, such as speaker failure, sound circuit failure, other related circuit or component failure, etc., it is recommended to contact the respective after-sales service to repair the equipment to solve the problem.

The S terminal is the image signal transmission line, and the sound signal must also be transmitted through the double-ended Lotus audio line. This question has been hot lately, and I've answered it many times. I've also tried not only that there is no sound but the picture is very blurry s,

Use an S terminal cable, plug in the S terminal interface of the computer at one end, and plug the S terminal interface of the TV at the other end.

If your TV doesn't have an S-terminal connector, it can't be connected with an S-terminal cable.

In addition, the S terminal of some computers is a 7-pin jack, while TVs are basically 4-pin jacks, and the S terminal lines on the market are basically 4-pin. In fact, it doesn't matter, you don't have to look for a 7-pin S terminal wire, you can use a 4-pin wire at both ends. If the computer is 7 pins, just align the 4 pins and plug them in, and the 3 pins can be left empty.

After the computer is connected to the TV, you need to set it up.

There will be slight differences in the exact setting method, but it will be roughly as follows:

1. Right-click in the blank space of the desktop and select Properties.

2. In the pop-up "Display Properties" dialog box, click the "Settings" tab.

3. Click "Advanced" to see the display and graphics card properties dialog box.

There are tab buttons such as "General", "Adapter", "Monitor", "Troubleshoot", "Color Management", etc., and above this row of buttons, there will be a long button, mine is called "inter(r)".

extreme

graphics

2formobile", yours should be about the same. Click on this long button.

4. Click "Graphic Properties".

5. At this time, the left side will appear "TV", "Computer" and other option icons, you can choose "TV".

6、Finally, don't forget to set the resolution here,Generally, the resolution displayed on the TV should be set to 800 600,If it's too high, the display will not be clear。

In this way, your TV can display the content on the computer, and you can take the audio cable and connect the audio interface between the computer and the TV, and it will be perfect.

The audio cable can be connected to the speaker. Generally, there are two speakers, so the connection between the computer and the speaker is exactly one output and two input interfaces. Plug in the TV just right.

No, the S terminal only transmits the chromatic and luminance signals separately to reduce signal distortion. HDMI is currently commonly used for video and audio transmission over a single cable.

The image transmission quality is from weak to strong.

2. S terminal meets the quality of 768 lines.

3. The color difference meets the quality of 768 lines.

4. VGA meets the quality of 768 line.

5. DVI bus transmission quality is equal to HDMI bus (the two interfaces are just different physical interfaces, and the signal coding is the same, but the DVI bus does not include the audio part of HDMI, so DVI can only transmit **.) Meet the 1080 line quality, HDMI is currently the version.

6. DisplayPort performance surpasses HDMI because it can correct errors, but it lacks the support of terminal manufacturers. The future fate is uncertain.