How to choose a cheap and easy to use straw pellet machine?

How can I choose a cheap and easy-to-use straw pellet machine? I summarized four points from my own experience combined with the knowledge I learned from Shandong Kinge: First, what are the raw materials of users?

How much moisture? If it is dry sawdust, wood chips, wood chaff, wood flour, sanding powder, small shavings, then start simple, a trommel screen plus a biomass pellet machine, and the middle can be connected with a belt conveyor to connect the feeding and electrical control cabinet. Such a process has low investment, simple work, convenient operation and intuitive effect.

Many old users have entered this industry by configuring biomass pellet machines in this way.

Second, the user's power condition. The operation of the straw pellet machine needs to consume a lot of electricity, so the specifications of the transformer should not be too small. Generally speaking, if the transformer is less than 80kva, do not purchase straw pellet machine for conventional production.

Because such power conditions make it difficult for biomass pellets to produce profits. Small transformers can only use small straw pellet machine, and small straw pellet machine has high production cost due to waste of labor, low output, high power consumption, large wear, many faults, and short continuous operation time. Most of the old users choose small straw pellet machines to be experimental, looking for data from the use of straw pellet machines, learning the use and maintenance methods, and not preparing to obtain benefits.

Third, multiple hosts are used in parallel. Many old users consider the manual factors in the selection of straw pellet machine, and choose two or more straw pellet machine hosts to combine into a production line. Among them, the old users of the combination of two straw pellet machine hosts account for almost 30-40%, and the old users of the combination of more than two straw pellet machines account for 5-10%.

Fourth, the configuration of the dryer. The dryer is an auxiliary equipment for the normal operation and continuous production of the straw pellet machine, and its main role is to provide biomass raw materials suitable for the moisture of the straw pellet machine. Most of the old users have taken this into account when choosing a straw pellet machine and configured a suitable dryer.

According to the market in January 2020**, the straw pellet machine is between 4000 and 8000 yuan.

The straw pellet machine uses crop straw or wood chips as the main raw material, and presses it into cylindrical pellets through the straw pellet machine. According to the different qualities of raw materials, the pressed pellets can be used as biomass fuel or livestock and poultry feed.

Classification of straw pellet machine: Straw pellet machine is divided into extrusion type and stamping type, and the extrusion type has flat die straw pellet machine and ring die straw pellet machine, extrusion type is suitable for making feed pellets, and stamping type is suitable for fuel.

How about the rice of the straw crusher in Tongtian, hello pro 1, the staff should carefully check the material before the straw crusher works, and Chi Changzhong prevents hard objects such as metals and stones from entering the crushing room and causing accidents. 2. When feeding, the staff should stand on the side of the straw crusher to prevent being injured by the debris that comes out of the straw. Do not grip your hands too tightly when crushing long stalks to prevent your hands from being brought in.

3. The straw crusher stops feeding before stopping, and after the materials in the standby are cleared, the power supply is cut off and shut down. Cleaning and maintenance should be carried out after the shutdown. 4. After 300 hours of operation of the straw crusher, the bearings must be cleaned and the oil replaced; When installing oil, it is better to fill the gap of 1 3 of the bearing seat, and not more than 1 2.

In the event of a prolonged shutdown, the drive belt should be removed.

There are many manufacturers of straw crushers in Henan, and the quality is clear, so you can go to the manufacturer for a field visit.

The straw crusher is mainly suitable for crushing a variety of plants with a growth period of one year: such as crushing corn, sorghum, wheat straw, bean stalk, corn stalk, straw, peanut seedling, sweet potato seedling, peanut skin, dried weeds, dried sweet potato, crushed bean cake, cotton, corn stalk, eggplant, pepper straw, cotton stalk, bark, branches, corn stalks, straw, etc., and the crushing length can be manufactured according to customer requirements.

Our company's dry and wet fine grinder (patented product) can crush dry, wet and semi-dry materials (organic fertilizer, greenhouse tomatoes, cucumbers, eggplant whole rhizomes and leaves, whole corn straw, tobacco straw and other straw crushing and feed crushing, etc.), the whole straw does not need to be cut off in advance, which can perfectly solve the problem of large water content of materials, large output, and can reach feed level fineness after crushing!