What material is the Philips 1430 baseplate?

In general, he chooses high-density plastic materials for this material, and the effect is relatively good.

1. Philips lighting source has the advantages of using low-voltage power supply, low energy consumption, strong applicability, high stability, short response time, no pollution to the environment, multi-color luminescence, etc., although it is more expensive than the existing lighting equipment, it is still considered that it will inevitably replace the existing lighting devices. A 60-watt incandescent light source consumes electricity per hour; A 15-watt energy-efficient light source consumes electricity per hour. If the lights are turned on for six hours a day, the use of energy-saving lighting sources can save more electricity than incandescent lighting sources, and can save LCOE in a month.

2. If the 11-watt energy-saving lamp is used for 5 hours a day, the electricity cost is calculated according to yuan kilowatt hours, and the use of an energy-saving lamp is about 50 yuan per year compared with the use of incandescent lamp. Philips lighting is divided into different wattages such as 3W, 5W, 9W, 11W, etc. Philips lighting can be driven by direct current, and the working current is around, which makes its power consumption lower than that of more than 80% energy saving compared with traditional light sources, and about 30%-50% energy saving compared with energy-saving lamps of the same wattage.

3. The advantage of Philips lighting is energy saving and environmental protection. The advantage of Philips lighting is that it is energy-saving and environmentally friendly. The luminous efficiency of light reaches more than 100 lumens watts, ordinary incandescent lamps can only reach 40 lumens watts, and energy-saving lamps hover around 70 lumens watts.

Therefore, with the same wattage, Philips lighting will be much brighter than incandescent and energy-saving lamps. The brightness of 1 watt LED lamp is equivalent to about 2 watts of energy-saving lamp, 5 watt LED lamp consumes 5 degrees of electricity in 1000 hours, and the life of Philips lighting lamp can reach 50,000 hours, and the LED lamp has no radiation.

Generally speaking, the bottom plate material is a relatively high-strength, plastic-based material, composite material.

If it's fast 1 to 30, what kind of base plate is it? I feel like I want to think about what brand of baseplate, different models of materials, floor covers and grades are also different.

Hello, you can go and buy according to your liking. The material of this base plate is also different.

You should pay attention to the official website of Fenfen Feihu to inquire, what do you want about this condition, take a look at the online introduction.

The bottom plate of this Philips you are talking about is a plastic bottom plate.

T-ionicglide is Philips' highest quality baseplate. The optimaltemp iron sets a new standard for smoothness and scratch resistance. The new coating with patented technology ensures excellent results.

This steam iron has a well-designed shape and vents to ensure even steam distribution for effortless wrinkle removal. The Steamglide is the highest-end Philips baseplate. It is excellent scratch resistant, glides smoothly and is easy to clean.

The coating is multi-layered, so the scratch resistance is more significant, and you may need to call their customer service for specific materials, after all, there is no specific material on the official website.

GC1418 is a 13 g min steam output, non-stick soleplate, water repellent, 1000 watts, spray function to provide a suitable temperature mist for uniform wetting of laundry. Covered with a non-stick coating. The water tank filling door prevents water from accidentally spilling out of the tank, and there are specific features on the official website, so the landlord can go and see for himself.

The thermal conductivity of the Teflon plate is lower than that of the ceramic plate, and it is not easy to burn your hands, and then Teflon is not as brittle as the ceramic plate, which is more tolerant of leakage and easy to store and carry without worrying about breaking, and the temperature resistance of the ceramic plate is higher than that of Teflon, but the temperature of the iron ruler bucket is far from exceeding the melting point of the two, because we are ironing clothes, not burning clothes Teflon bottom plate is much more expensive than ceramics, if you need it.

The function of the ceramic bottom plate is smooth, and the bottom plate of the general electric iron is pure stainless steel or iron, so that the ironing will be more difficult, in addition, the temperature is also high, and it is easy to damage the clothes. The ceramic base plate is different, and it is smooth and maintains a constant temperature. But there are also disadvantages of pure ceramic bottom plate, that is, the thermal conductivity is not as good as stainless steel, and the bottom plate of Cuori Zhuoli ironing machine is ceramic + stainless steel, which can not only ensure the smoothness of the ceramic, but also ensure the thermal conductivity.

It is recommended that you can take a look, ** are all about the same.

Obvious quality problems, you should be able to ask for a return, Philips is also a well-known brand, if it is not a human reason, you can return it, don't buy Philips again, because Philips's electric iron is basically 500 yuan before the quality. If you want to be economical, you should choose Panasonic, I have never heard of Panasonic electric iron quality problems, and it also has a two-year warranty, that is, if you have a problem after more than a year, it is also warranted.

It may be that there is a problem with the internal system of the product, and you can call ** to consult after-sales service to repair.

Philips irons feature a special cutting-edge design, special steam holes and a smooth bottom plate, all designed to be fast. The GC4630 is ironed efficiently with IOONIC DeepSteam technology, which uses deep ion steam technology to remove stubborn wrinkles. This powerful steam iron produces 50% smaller steam particles that penetrate deep into the most difficult fabrics such as cotton and linen for easy wrinkle removal.

Not a normal situation!

You can go to the shopping mall with a valid proof of purchase and ask for repair or replacement. Philips small appliances are free of charge for two years, so don't worry.

The electric iron used at home does not need to have too many functions, as long as it is simple and practical.

The bottom of the base plate and a slotted screw. Twist it with a knife. There is no other way.