How to unblock the smart toilet when it is blocked

You can find a half-inch wide bamboo strip and put it into the toilet to dredge it, which can solve the problem; Many times the toilet flushes more and flushes itself, especially if it is a soluble or breakable item such as dirt or paper. If it's greasy, then rinse a basin of boiling water to melt it. Buy some caustic soda, boil water to melt the caustic soda, and pour it into the toilet.

After ten minutes, everything will be cleared; Find a property, they have the responsibility and obligation to help you; Buy a puff. Use an appropriate amount of oxalic acid (usually you can also use oxalic acid to clean the toilet, just neutralize with the urine alkali to achieve the unobstructed toilet); You can buy a loach and put it in a squatting toilet, pour warm water into the toilet, and the loach will desperately drill down when it is hot, so as to achieve the purpose of making a toilet. If there's nothing hard about it, I think it'll work.

The old-fashioned mop, fill the toilet with half of the water, and then press the hole a few times with the mop, moving quickly, relying on pressure to get it through; You go into the water halfway through it with a round mop, or with a round-tipped soft brush, and you pound it hard against the hole in the sewer.

The smart toilet blocked the dredging methods: leather pegs, dun cloth method, water pipes, caustic soda, and large bottles of coke.

1. Leather picks.

Add water to the toilet, and then look at the amount of water that can have a certain momentum, put the leather hammer at the mouth of the toilet bowl and press it violently, as long as you hear a loud bang, the explanation is clear, if not, repeat many times.

2. Dun cloth method.

Mop the floor with your mopping cloth. First put the dun cloth at the mouth of the toilet, then put the water to ensure that the water submerges the dun cloth, and then press the dun cloth hard, stuff it into the toilet mouth as much as possible, and finally lift the dun cloth as quickly as possible.

3. Water pipes. Find a longer length of plastic water pipe, connect the tap water at one end, plug the toilet mouth with the other, and then plug the toilet mouth with something like rags, and then turn on the tap water, which will use the water pressure to unclog the pipe.

4. Caustic soda. Buy some caustic soda, boil water to melt caustic soda, pour it into the toilet, after ten minutes, the toilet will be passed, such a principle because of the burning of the alkali has a corrosive effect on fibers, **, glass, ceramics, etc., and even has a corrosive effect on some metals, and the toilet itself happens to be a ceramic item, but caustic soda is too alkaline, and at the same time will cause pollution to water resources, from the perspective of environmental protection, it is not suitable for daily life to use.

5. Large bottle of Coke.

Buy a large bottle of Coke, come back, drink the drink first, then cut off the bottom of the mouth of the Coke bottle, cut it off and put it upside down in the toilet, just hold the bottom with your hand and pump it up a few times.

If the smart toilet is blocked, you can try the following methods to dredge it:

Use a toilet unclogner: Purchase a toilet unclogger (also known as a toilet piston), insert it into the toilet drain, and push it firmly a few times to create pressure and unclog the blockage.

Use chemical unclogging agents: In some cases, chemical unclogging agents can be used to dissolve blockages. According to the product instructions, pour an appropriate amount of chemical dredging agent into the disassembled toilet, then wait for a while before rinsing with water.

Please be sure to use the travel base in accordance with the product instructions and warnings, and pay attention to safety.

Manual cleaning: If the toilet is severely clogged, it may need to be cleaned manually. Rubber gloves can be worn and tools such as toilet brushes or pliers can be used to remove the blockage as much as possible. Make sure to turn off the water source and drain beforehand to prevent water from splashing.

Seek professional help: If the above methods don't work or you don't want to deal with it yourself, you can seek a professional toilet unclogging service. Professional unclogging masters usually have more specialized tools and techniques to solve the blockage problem.

Whichever method you use, safety comes first. When dealing with blockages, take care of your own safety, follow proper operating methods, and avoid using too much force to avoid damaging the toilet bowl or causing other problems. In case of severe blockage or inability to deal with it, please seek professional help in time.

What should I do if the fully automatic toilet is blocked, and how to dredge it quickly.

Hello dear, I have found out for you how to quickly dredge the fully automatic toilet blocked The method is as follows: Method 1: Homemade dredging agent with baking soda and white vinegar can be said to be an artifact, these two products can be said to be very common, almost every household must-have.

When we encounter that the toilet drain is not very smooth, we can mix the two of them together to make a dredging agent. We only need to pour some baking soda into the toilet, and then pour in a small half bowl of white vinegar, and then wait quietly for 5-6 minutes next to it, let the "dredging agent" dissolve the foreign matter, and then pour in a basin of hot water, so that our toilet will be dredged.

We first prepare the unwanted drink bottles, then take out the scissors, cut off one-third of the drink bottles, and then pour the remaining part into the toilet, and then hold the bottom with your hands to pinch it flat and pump it up about three to four times, after the operation, the problem of toilet blockage will be solved. Method 3: The garbage bag dredging method only needs to prepare a garbage bag and a toilet brush, of course, you can also prepare two garbage bags, which can be more firm and not easy to break.

Don't underestimate these two humble things, they can help us a lot at a critical time. First of all, we take a round-headed toilet brush and then put the garbage bag we prepared on the toilet brush head, and tie the bag after the set, here "the point, the bag must be firmly wrapped around the toilet brush head, otherwise it will fall later" Then we take the toilet brush and poke it into the toilet mouth, quickly poke back and forth, so that the pressure will be formed, and the foreign body will naturally be flushed away when the pressure is enough, method four: the tape dredging method needs to prepare two to three rolls of yellow tape, in case the tape is not enough in the middle of the operation.

At first, wipe the outer edge of the toilet bowl dry, otherwise the unclogging effect will not be good enough because the tape is not sticky. Next, just seal the edges and corners of the toilet bowl with tape, and then press the water button, then the tape will feel an oncoming pressure and bulge, if my answer is helpful to you, please also give a like (in the lower left corner of the evaluation), look forward to your like, your efforts are very important to me, your support is also the driving force for my progress. If you feel that my answer is still satisfactory, you can click on my avatar for one-on-one consultation.

Finally, I wish you good health and a good mood!

What to do if the toilet is clogged, teach you how to dredge it quickly by yourself, and solve the clogged toilet in one trick!

First, use a leather picker, add water to the toilet, pay attention to the amount of water can not be too much, when the water is about the same, when there is a certain momentum, you can use the leather pick to press the toilet mouth, when you hear a 'knock' sound, then it makes sense. Second, the dun cloth method; 3. Use plastic water pipes; 4. Buy some caustic soda; 5. Use boiling water.

If you don't have any tools at hand, fill a bucket of water, quickly fill it down at one time, and through high-pressure gravity, the blocked part will be washed down, if the strength of the obstacle is not high, then it is relatively easy to dredge, this way is suitable for the situation that the toilet water level is not completely blocked, and the water level of the toilet is slowly declining, in the case of the toilet is completely blocked, the water surface is already very high, and it is impossible to pour water into it.

Method 2: Use a traditional leather picker.

The method of skin picking, I believe everyone has tried, a bit by luck, repeated many times if it does not work, in fact, because of the lack of suction, can not guarantee that the blockage will be loosened, so this method is not particularly effective. When choosing a leather pouch, remember to choose a product with soft edges and a high fit, the effect will be much better.

In addition to the flush toilet blocked, other sinks and other sewers are blocked, this also works, always have one at home, and you won't have to worry about trouble.

The plastic bag is covered with a toilet brush, and the toilet brush is used to poke the hole in the drain when pressing the flush, which is suitable for the situation of slight blockage, and it is effective in personal testing.

It doesn't matter if it's an ordinary toilet or an automatic toilet, the principle of draining water is the same. Once a blockage occurs, find a way to unblock it. There are several ways to unclog the toilet:

The first is to squeeze vigorously with a leather puff and push away the clogged dirt with the help of air pressure.

The second is to use a hand-cranked dredge or the dirt blocked by the claws that are very hot on the net to take out, so as to achieve the purpose of dredging the pipeline.

The third is to use pipeline dredging agent to dissolve and differentiate blockages according to the instructions.

Which method is more appropriate to use, please choose according to the specific cause and situation of the blockage.

Your adoption is the motivation for me to answer the questions.

The smart toilet is blocked and dredged as follows:

You can use a leather puff to get through. You can also go to the market and buy a loach and put it in the smart toilet for dredging. In addition, you can also put a long flexible ventilation pipe into the smart toilet for ventilation, and then flush it to dredge it.

But if you use these methods and the smart toilet is still not unblocked, you can only find a property or professional to help.

What are the advantages of a smart toilet

1. Comfortable and warm seat

It definitely takes courage to sit on the toilet and go to the toilet in the cold winter. But the smart toilet is different, because when using the smart toilet, it will automatically heat up to a temperature similar to the body's body temperature. Moreover, the smart toilet also has the characteristics of a temperature-controlled seat, and the user can adjust the temperature according to the change of climate, so it is very convenient.

2. Washing is more hygienic

In fact, the smart toilet also has the function of washing, so that you can avoid the trouble of cleaning the toilet paper. At the same time, the smart toilet also has a variety of flushing modes, which can not only remove stains, but also massage. If you use a smart toilet for a long time, it can promote our blood circulation and prevent hemorrhoids.

3. It has a variety of functions of self-cleaning, deodorization and power saving

It is understood that most smart toilets can be cleaned automatically. Moreover, most smart toilets have an automatic deodorization function, which can also save energy consumption after long-term use.

If the toilet is clogged, you can use a leather picker to quickly unclog it.

If you have tools at home, use them, and generally have a leather picker or unclogger at home.

If you don't have a leather piston at home, first find unwanted fabric (rotten clothes are fine), a wooden stick, and a rope, tear the fabric into strips, wrap it around a section of the wooden stick, make a simple piston shape, and fix it with a rope. Note that the diameter of the piston you make should be slightly larger than the toilet hole.

Then put the piston into the toilet bowl and pump it up and down, you can put some water to seal. Generally, it will be dredged, and its principle is to use atmospheric pressure to open up the sewer, which has been tried and tested.

Precautions for using skin rakers

1. When we are preparing to dredge the toilet and use the leather lever, we should pay attention to whether the leather lever has sealed the sewer mouth tightly, if it is not completely blocked, there will be air leakage, so there is no way to dredge the toilet. When we unclog the toilet, remember to flush the toilet drain with water to flush the toilet pipe and inner wall bucket.

2. When we dredge the toilet, we should use the leather to pick up as fast as possible, press down quickly, and lift up quickly when we pick it up. However, it is also necessary to pay attention to the strength of the force, otherwise it is easy to cause the sewage to splash out.

3. Now there are many different types and materials on the Internet, and there will be some subtle differences in its effect and use of different types and materials. We should consume ideally, according to our actual situation and economic situation to buy leather picks, in the case of sufficient budget, or buy leather picks with suppression function as well.

The difference between a self-energy toilet and an ordinary toilet is that there is almost no difference between the water supply cleaning and heating, etc., so it can be dredged with a leather pouch or dredge like an ordinary toilet.

You can use a prick, you can also use a dredging agent to try, if not, then you have to ask the master of pipe dredging to deal with it.

Toilet blockages occur from time to time, but the situation is different, so it is necessary to find out the cause of the blockage first, and then take targeted solutions.

If it is a blockage of soft substances, you can pour hot boiling water into the toilet bowl to soften the blockage in the water pipe and let it soak for a while. When it softens, we can see that the sewage is gradually receding, and we can wash it with a large bucket of water. Or use a special toilet unclogging tool or wire agitation, through the principle of pressure, basically can solve this blockage.

There is also a very old-fashioned method, directly use the mop at home to the toilet sewage pipe to smash a few times, open the pressure to dredge, the action should be fast, although this method is also more old-fashioned, but it is also more effective, if your home toilet is blocked, you may wish to use this method to try.

Toilet maintenance guide

1. Make sure the toilet water shut-off valve is in the closed position.

2. After removing the plunger of the float valve, you will see one or two gaskets (or O-rings). If any of these parts fail, water will continue to flow out through the valve plunger and the toilet tank will remain open. Therefore, all gaskets should be inspected and replaced immediately if damaged.

3. If the float valve is sealed, replace it completely. Turn off the water source from the toilet bowl at the water shut-off valve and drain the water from the tank. Unscrew the floating arm from the old ball valve and remove the water injection line from the overflow pipe.

4. Find the connecting nut or sliding nut under the water tank, and the water inlet pipe enters the bottom of the water tank here. Loosen the connecting nut, remove the inlet pipe, and clamp the lock nut or lock nut under the tank with an adjustable wrench. They are located above the slide nut and grip the base of the float valve with another wrench in the tank.

5. Unscrew the lock nut under the water tank and remove the float valve. If the nut is too tight, loosen it with a penetrating lubricant.