What is the difference between angle valve and ball valve, is it better to have angle valve or ball

1.The angles are different. The inlet and outlet angles of the valve are 90 degrees, while the inlet and outlet of the ball valve are straight-through.

2.Different occasions of use. Angle valves are mainly used for heating pipes and connecting hoses. Ball valves are mainly used for heating and are used to connect hot and cold pipes.

3.Performance is different. Angle valves can change the direction of flow, and their resistance and throttling effect is greater than that of ball valves.

4.The features are different. Ball valves can't change the direction of water flow, angle valves can.

5.The flow is not the same either. Comparatively speaking, the flow resistance of angle valves is slightly greater than that of ball valves, mainly because of their different structures, so the flow rate of ball valves is slightly larger at the same diameter.

Learn about angle valves, ball valves.

Angle valve, that is, angle stop valve, also known as triangle valve, angle valve, because the angle valve at the pipeline is at an angle of 90 degrees. The angular flow path is simple and the flow resistance is small, which is suitable for high viscosity, suspended solids and granular fluids. The body of the angle valve has three ports:

Water inlet, water control and outlet, so it is called a triangle valve.

The angle valve is an angle globe valve, similar to a ball valve, and its structure and characteristics are modified by the ball valve. Angle valves are also called triangle valves, angle valves, and angle water valves. Triangle valves are available in both hot and cold (distinguished by blue and red signs).

Most manufacturers are made of the same material. Hot and cold signs are mainly used to distinguish which is hot and which is cold.

Angle valves are generally used in washbasins or toilets, and ball valves are used in water heaters where there is a home as the main water inlet.

Angle valve is good. Angle valves can change the direction of fluid flow, while ball valves do not. The throttling effect of the angle valve is greater than that of the ball valve.

The angle valve is:The angle valve is an angle globe valve, which is similar to the ball valve, and its structure and characteristics are modified from the ball valve. The difference with the ball valve is that the outlet of the angle valve is at a right angle of 90 degrees to the inlet.

Angle valves are also called triangle valves, angle valves, and angle valves. This is because the pipe is shaped at an angle of 90 degrees at the angle valve, so it is called an angle valve, an angle valve, and a corner water valve.

The angle valve has a simple flow path and small flow resistance, and is suitable for high viscosity, suspended solids and granular fluids. Angle valves can change the direction of fluid flow, while ball valves do not. The flow resistance of angle valves will be greater than that of ball valves.

Due to structural reasons, the actual flow of the ball valve will be larger with the same caliber. The throttling effect of the angle valve is larger.

The main difference between the two is that they play different rolesBall valves cannot change the direction of water flow, but angle valves can.

At the same time, the flow resistance between the two is also different, relatively speaking, the flow resistance of the angle valve is slightly larger than that of the ball valve, mainly because of their different structures, so in the case of the same diameter, the flow of the ball valve is slightly larger.

Related introductions

As the name suggests, the ball valve core is like a ball, and the water is discharged along the round hole in the middle, and the ball valve can only play the role of opening and closing, but it cannot adjust the flow rate.

For example, if you open it halfway, half-open and half-closed, and there's water flowing through, it's not 50% flowing. If it is opened halfway, it is not feasible and will damage the ball valve, which is generally used in the hot and cold inlet pipes of heating.

If you choose an angle valve, its inlet and outlet are 90 degrees, perpendicular to each other, and ball valves, not straight in and out. Not only does it open and close, but it also changes the flow of water. Generally speaking, the sink of the washbasin, including the kitchen sink, and the hot and cold inlet pipe of the water heater, will choose an angle valve, so that the switch will be more convenient.

1, as said upstairs, the angle valve can change the flow direction of the fluid, and the ball valve will not 2, due to the reasons of the previous article, the flow resistance of the angle valve will be greater than the ball valve 3, due to structural reasons, the same caliber, the actual flow of the ball valve will be larger 4, the throttling effect of the angle valve is larger, generally speaking

There is a difference, the angle valve is similar to the ball valve, and its structure and characteristics are modified from the ball valve. It is divided into quick-open and ordinary

The inlet and outlet fluid directions of the ball valve are the same, and the inlet and outlet fluid directions of the angle valve are perpendicular View the original post

The angle valve is generally installed at the bottom of the reactor and is used for discharging, which is generally divided into upper and lower expansion. Specifically, you can take a look at the original post

Summary. A valve core is spherical, the ball core diameter is large, the water flow resistance is relatively small, the flow rate is fast, and the flow rate is large. One is the ceramic valve core quick opening type, the diameter of the ceramic core is smaller than the ball core, the water flow resistance is relatively large, the flow rate is slow, and the flow rate is small, the difference between the ball angle valve and the ordinary angle valve.

A valve core is spherical, the ball core diameter is large, the water flow resistance is relatively small, the flow rate is fast, and the flow rate is large. One is the ceramic valve core quick opening type, the diameter of the ceramic core is smaller than the ball core, the water flow resistance is relatively large, the flow rate is slow, and the flow rate is small, my water heater wants to change the angle valve.

Then you can consider the spherical one.

My water heater in my house has zero cold water.

Do you choose a spherical type for all four angle valves?

If there is zero cold water, it is recommended in general.

Can't you use a spherical one?

Yes. The general one is more suitable.

Oh, spherical water flow fast.

So what brand should you choose.

Zero cold water is easy to scald.

<> difference is that the angle of export vs. import is different. The angle of the outlet and inlet of the angle valve is at a right angle, that is, 90 degrees, while the ball valve is straight, which is the fundamental difference between the two. The angle valve mainly acts on the heating pipe, that is, the hose connecting the faucet and the wall, because the position of the pipe at the corner is at a right angle, so the angle valve is applicable, while the ball valve is not.

The ball valve is mainly used for the hot and cold water inlet pipe of the heating, because of the different design of the inlet and outlet angles, the place where the Ersen Zen people sell and use is also different.