What is the reason for the non stop replenishment of water in the washing machine

There are several reasons why the washing machine keeps replenishing water:

1. The general situation is that the valve core of the inlet valve is stuck, and it cannot be reset after being opened by power, resulting in water inlet all the time, and the water inlet valve is replaced first.

2. If the fault is not solved, the problem lies in the water level switch, after a long period of use, the water level switch can stop the water ingress, causing the water inlet not to stop, at this time the water level switch should be replaced.

3. If the pressure pipe is worn and broken due to a long period of use, or the pressure pipe is in poor contact with the water level switch and the outer barrel air nozzle, causing air leakage, it can also lead to more than water ingress.

4. Due to the use of a long time, there is a foreign object blocking the air valve mouth, resulting in the pressure can not be transmitted to the pressure switch, at this time the big nut should be unscrewed, and then take out the inner barrel to take out the foreign body blocking the air valve.

5. If everything is invalid, you should try to replace the computer board, because all actions are controlled by the computer board.

There is a problem with the water level switch.

How to overhaul the water level switch of the automatic washing machinecomputer-controlled automatic washing machine, after turning on the power and selecting the washing program, the washing machine will start to enter the water, and when the water level reaches a certain height, the wave wheel will begin to rotate. If the water is not stopped, and the wave wheel does not rotate, first check whether there is air leakage in the air duct, if there is no air leakage, it means that the water level switch is faulty, and it can be repaired according to the following methods: 1. Check whether the insert on the water level switch is loose and open the control seat, and check whether the plug on the water level switch and the plug of the control wire is loose or in poor contact.

The plug can be unplugged, cleaned and reinserted. 2. Check whether the two inserts of the water level switch are on and cut off the power supply, unplug the control wire, and measure the resistance value between the two inserts of the water level switch with a multimeter resistance file to judge whether it is on. 3. Check the control spring of the water level switch Check whether the control spring of the water level switch is normal, if the elastic force of the spring is too large, the movement of the rubber sealing ring will be blocked, and it will not be able to move, resulting in more than water ingress, at this time, the adjustment screw on it can be adjusted to make it in the correct position.

4. Check the other parts of the water level switchIf the other parts of the water level switch are damaged, or caused by the water level switch being used for too long, the water level switch should be replaced with a new one. The model type program controller automatic washing machine water level switch is basically similar to the computer-controlled program controller automatic washing machine water level switch, the difference is that the computer-controlled automatic washing machine water level switch has only two inserts, and the mechanical automatic washing machine water level switch has three inserts, divided into two groups, in the free state, one group conducts and the other group is disconnected, when the air pressure rubber seal ring acts, the group of energy conduction is disconnected, and the group of disconnected is on, which is normal. When a fault occurs, the maintenance method is the same as that of the computer-controlled washing machine water level switch.

The reasons why the washing machine does not stop filling with water are as follows:

1. The hose between the return pipe of the washing machine and the water level switch falls off.

2. The return pipe is blocked. Section

3. The water level switch of the washing machine is damaged, or the return pipe is leaking.

4. The valve core of the water inlet valve is stuck, and it cannot be reset after being turned on by power. Section

5. The computer board of the washing machine is faulty, and the operation of the washing machine cannot be controlled.

When using the washing machine, do not place or use flammable chemical solvents such as sprays, spray paints, paints, gasoline, and other organic solvents around the washing machine.

Extended Information] Washing machine maintenance method:

1. When placing the washing machine, do not place it in a too humid place, which is easy to make the computer board in the washing machine damp, and try to place the washing machine in a cool and ventilated place.

2. When doing laundry, it is best to take out the items in the clothes, and at the same time close the zipper of the clothes to prevent damage to the laundry trough.

3. When the washing machine is running, it is best not to overload the washing machine, because it is easy to make the washing machine abnormal if the time is too long.

4. Regularly check that the washing machine is placed very horizontally, if the washing machine is tilted, it will easily lead to the phenomenon of bucketing during washing, and the noise of the washing machine will be very large.

1. The problem of the valve core of the water inlet valve may be that the water inlet valve core is called by a foreign body card leakage, and the return spring is corroded.

2. The water level switch is faulty.

3. The pressure pipe is worn or in poor contact.

4. There is a foreign object blocking the mouth of the air valve.

1. The washing machine cannot be reset after the washing machine is turned on by power, resulting in water ingress all the time, which is generally the fracture of the return spring and the electromagnetic coil.

The fixed iron core is deformed by heating, and the water inlet valve needs to be replaced.

2. If the fault is not solved, it may appear in the water level switch, because the water level switch can stop the water inlet after a long time, causing the water ingress not to stop, and the water level switch should be replaced at this time.

3. If the pressure pipe is used for too long, it is worn or broken, or the pressure pipe is in poor contact with the water level switch and the outer barrel air nozzle or disconnected, causing air leakage, which may also lead to water ingress. Because the computer board does not operate because the pressure does not reach the water level, and the misunderstanding is that the water level does not stop, at this time, it should be checked whether the pressure pipe is worn and whether the joints at the two ends have poor contact or disconnection.

4. Due to the long use of the washing machine, there are foreign objects blocking the air valve mouth, resulting in the pressure cannot be transmitted to the pressure switch.

At this time, the big nut should be unscrewed, and then the inner cylinder should be taken out to return to the field, and the foreign body blocking the air valve should be taken out.

Mainly check whether the water level switch is broken, the water level switch has a trachea stretched up from under the barrel to see if it falls off or is damaged. If you finish Hu Xian, just change a water level switch.

If the electricity is not turned on, the water inlet valve is damaged as soon as the faucet is turned on, and the water inlet valve needs to be replaced.

Press the power button, but do not press the start button contained in the washing machine, and it is found that the water ingress is a damaged computer board and needs to be sent to the factory for repair.

After the power supply and start button, the water inlet valve will automatically enter the water, but the washing machine will not be washed when it reaches the predetermined water level, it may be that the water level switch is damaged, the air pressure pipe is leaking or the air pressure hole of the water bucket is blocked, and it needs to be dredged.

The washing machine is a cleaning appliance that uses electrical energy to produce mechanical action to wash coarse laundry in Xiaozhen, and is divided into two categories according to its rated washing capacity: household and collective.

China stipulates that the washing capacity of less than 6 kg belongs to the household washing machine: the household washing machine is mainly composed of a box, a washing and dehydration bucket (some washing and dewatering buckets are separated), transmission and control systems, etc., and some are also equipped with heating devices.

There are several reasons why the washing machine keeps filling with water:

1.Faulty water level sensor: There is a water level sensor inside the washing machine that is used to detect if the water level has reached the set value. If the sensor fails, the washing machine will be filled with water. Royal Teasing.

2.Faulty water valve: There is a water valve on the inlet line of the washing machine to control the inflow and exit of water. If the water valve fails, it will cause the washing machine to keep filling with water.

3.Clogged leaking lines: Leaky lines in your washing machine can become clogged, preventing water from draining out, causing the washing machine to keep filling with water.

4.Leakage in the washing machine: If there is a leak in the inside of the washing machine, the water will not be able to drain out, which will cause the washing machine to keep filling with water.

5.Control panel failure: The control panel of the washing machine is faulty, which may also cause the washing machine to keep filling the jujube water.

It needs to be troubled and repaired on a case-by-case basis. It is recommended to contact a professional maintenance personnel for maintenance.