-
Generally, the company stipulates that the elevator can not be directly released if it exceeds the level of 50cm, and the power supply should be cut off before the release, and this kind of thing should be done by professionals, you just need to notify them in time, and as long as the door is always kept open, the elevator will not move.
-
You're right, you're right, you're right. You can explain why it can't be operated, you can't do it casually without trained personnel, and there will be problems that you are worried about without a power outage.
-
Do you have an elevator certificate? Will there be a rescue procedure? Can you guarantee that you won't have an accident when you save someone? So you're doing nothing wrong. But as an elevator manager, you should learn some elevator operations, and when the maintenance company comes to you, you will follow and ask more and learn more.
-
You're doing it right.
For the elevator in the machine room, the elevator maintenance personnel will first turn off the power supply of the machine room to avoid misoperation caused by elevator failure, and then use manual cranking to save people. For machine-room-less elevators, the automatic leveling rescue function will be used to carry out rescue (release the brake and slide leveling).
In short, there are many high-risk factors in the rescue process, and it is difficult for non-professionals to ensure that nothing goes wrong.
-
Obviously, you are doing something wrong in that case, I dare to say that the elevator will never move again, it has been fixed on the guide rail, unless you go to the machine room to loosen, you have already opened the elevator door, why don't you help people out
-
Don't you punch and kick him???
-
When the elevator is displayed"out of service", this usually means that the elevator is in a faulty condition or needs to be repaired. Here are some possible workarounds:
1.Check that the elevator doors are closed: Sometimes the elevator will not operate because the doors are not fully closed. Check that the elevator doors are closed correctly, if not, close the doors completely and try to start the elevator again.
2.Check the elevator interior panel: Check if the buttons on the elevator interior panel are working properly. If one of the buttons fails, you can try to use the Changxun buttons on other floors to call the elevator.
3.Restart the elevator system: You can try restarting the elevator system. Locate the elevator's circuit breakers or switches on the control panel, turn them off for a few seconds and turn them back on. This usually resets the elevator system and allows it to function normally.
4.Contact the maintenance staff: If the above methods are ineffective, it is likely that the elevator is faulty and needs to be dealt with by a professional maintenance person, Nafeng. In this case, you should immediately contact the elevator manufacturer or maintenance service provider in order to quickly solve the problem.
It should be noted that the elevator is a very important safety facility, and any unauthorized maintenance activities may lead to safety accidents. Therefore, in the event of an elevator base talk failure, appropriate measures should be taken immediately and the corresponding operating procedures and safety procedures should be followed.
-
Stay calm: If you are trapped in the elevator, first of all, stay calm, do not take drastic behaviors, such as jumping around, etc. Adjust your breathing Try to inhale and exhale as smoothly and slowly. Use the elevator or walkie-talkie to contact the outside world, you can also press the alarm bell on the dial, if the mobile phone has a signal, the trapped person can call the rescue ** in the car for help.
In addition, you can also bang on the door and shout.
In order to transmit the distress signal in time.
Waiting for rescue: When professionals come to the rescue, be sure to follow the command of the rescuer and cooperate with the rescue operation to ensure safety.
Do not forcibly open the elevator door: do not try to force the elevator door, if there is an emergency exit from the elevator ceiling, do not climb out, if the exit plate is closed accidentally, the elevator may suddenly open to imitate the age of jujube movement and make people lose balance. In the pitch-black elevator slot, people may trip over the elevator cable or slip due to stepping on grease, causing them to fall off the top of the elevator.
Hold the handrails tightly to prevent falls: If there are handrails in the elevator, please hold the handrails tightly with one hand to prevent falling due to unstable center of gravity, maintain self-protection actions, and keep your back close to the inner wall of the elevator with your knees bent and your toes on tiptoe. Maintain this protective action, so that in the event of a false blow, it will not cause a fall due to an unstable center of gravity.
Maintain self-protection actions: Keep your back close to the inner wall of the elevator, bend your knees, and stand on your toes, so that you will not fall due to the unstable center of gravity in the event of an impact.
-
Although the floors of housing buildings are getting higher and higher, elevators have become very popular, especially for high-rise buildings, there is no elevator, or power outage, it will bring great inconvenience to travel, and the elevator as a precision, load-bearing equipment, in use is in need of regular maintenance, otherwise it is very dangerous if there is a failure, but the elevator has been used for a long time, it is inevitable that it will encounter failures, so what should I do if the elevator fails? Let's take a look with Qeeka Home experts.
1. What to do if the elevator fails.
If the elevator fails, you must first keep calm, if you think too much panic, it is difficult to save yourself, and then press the emergency alarm button in the elevator, and at the same time you can also try to call 100 to call the police or call relatives and friends**, during the rescue period, it is best to grasp the handrail of the elevator with your hands open, and squat down with your back against the elevator to avoid the elevator falling suddenly, resulting in secondary injury.
Second, what are the common faults of the elevator?
1. The elevator cannot close and open the door normally.
The elevator can not close and open the door normally, presumably many people have encountered, in this case must be reported to the elevator maintenance personnel in time for maintenance and elimination, it may be caused by the control circuit fuse is too loose, fused, etc., it needs to be tightened or replaced.
2. The elevator door does not open.
After arriving at the floor, the elevator door is not opened generally because the secondary door opening limit switch 2km damage caused by the door opening relay is not electrified, at this time it can be checked and determined by shorting two points, if it can open the door, it means that it is 2km damaged, so it needs to be replaced 2km on the line.
3. There is no response when you press the close button.
There is no response when pressing the door closing button, which is generally caused by poor contact and damage to the AGM contact, at this time, you can short-circuit two points for inspection and measurement, and choose to repair or replace according to the specific situation.
Summary: The above is an introduction to what to do if the elevator fails, I hope the content shared can give you some reference, if you want to know more about relevant knowledge, you can **** Qijia to consult.
-
What should I do if the elevator fails? Rescue measures and countermeasures
With the popularization of elevators, elevator accidents have also increased. If the elevator breaks down and the passengers are trapped in the elevator compartment, emergency rescue measures should be taken, and the rescue should be guided by experienced professional and technical personnel; In exceptional cases, it should also be commanded by professionally trained personnel. In general, there is no danger for passengers to be trapped in the elevator car, and many accidents occur due to excessive panic of passengers or blind rescue by non-professionals.
So what should you do if the elevator is stuck in it? Below we will bring the rescue measures of elevator failure and the response to the search and dry model, I hope to be able to help you.
Rescue measures for elevator failure:
1. First of all, try to notify the trapped passengers that rescue is already being carried out outside, please do not panic, do not force out of the car, so as to avoid secondary accidents.
2. The turning work is usually carried out by 2 staff members in the machine room. Before operation, the main power switch must be cut off first.
3. When cranking the toothless high-speed elevator, you should be more careful, and you should use the "stepping mode" to loosen the brake and proceed slowly.
4. After the car is rotated to the flat floor, the brake must be restored, and then the special key for the elevator hall door is used to open the hall car door and release the trapped passengers.
5. When the elevator cannot be disced, it may be that the safety gear has been activated, and further work should be guided by professional and technical personnel.
6. During the whole rescue process, we should always maintain contact with the passengers in the car, comfort the passengers not to panic, and pay attention to the passengers' situation at any time.
Countermeasures for being trapped in an elevator:
1. If the elevator suddenly breaks down when you are taking the elevator, stay calm and don't panic. Stay calm while comforting those who are trapped together;
2. Defeat to explain to everyone that there is usually no danger, the elevator will not fall off the elevator slot, and everyone should work together to find a way to ask for help;
3. Explain to the trapped person that there is usually a safety anti-fall device at the bottom of the elevator. The anti-fall device will be firmly stuck on the tracks on both sides of the elevator slot, so that the elevator will not fall. In general, the safety device will not fail in the event of a power failure; Call for help immediately with an alarm bell or walkie-talkie;
4. In the case of calling for help and no help, the safest thing to do is to stay calm, retain physical strength, and wait for the opportunity to rescue. Be mentally prepared to suffer from hunger and sweltering heat.
5. If there is no alarm bell or walkie-talkie, you can knock on the door and call for help; If you can't find the elevator mechanic immediately, ask someone outside to call the fire brigade or the police for help. Firefighters usually twist elevators up or down.
6. If there are no trained lifeguards outside, do not climb out of the elevator by yourself; Do not try to force the elevator door open, even if you can open the inner door, you may not be able to open the outside door. The grease on the outer wall of the elevator may make people slip, and it is not easy to get out safely with the outer door;
7. If there is an emergency exit on the ceiling of the elevator, do not climb up easily. Because as soon as the exit plate is opened, the safety switch makes the elevator sand immobile. However, if the exit plate is closed unexpectedly, the elevator may start suddenly, causing people to lose their balance, and if they trip, they may fall from the top of the elevator and cause serious injury.
-
Stay calm and don't panic, stand against the wall and press the call button.
1. When the elevator suddenly fails, panic is inevitable, but after a short period of fear, you should calm down. Start by stabilizing your emotions and keeping your head level.
2. First of all, press the staircase button on each floor to observe whether the elevator responds. And look for a trouble-free distress button in the elevator, and press it at the same time to wait for rescue.
3. Stand in the corner of the elevator and try to keep your back close to the edge to protect your spine. If there is a handrail in the elevator, hold on to the handrail and stand firmly with your legs slightly apart.
4. Start to try to shout loudly to people outside, at this time, it is best to use the newspapers around you to roll into a cylindrical horn and then shout for help, which has the function of amplification, and can also use hard objects to knock on the elevator.
This should be a number-stealing Trojan virus, and the Trojan scavenger should be able to solve your problem. >>>More
No, most likely it is a field output failure.
My little p has been in water and the condition is similar to your own, but I still have a problem is the string of keys, and then I took the battery out of the napkin and wrapped it in a napkin, and then wrapped the host well, put it in a dry place for a week, and then take it out and you can use it I don't know if you have as good luck as me. >>>More
Elevators are divided into passenger elevators, sightseeing elevators, machine-room-less elevators, medical elevators, freight elevators, machine-room-less freight elevators, car elevators, sundries elevators, escalators, moving walks, three-dimensional garages and other products. The company has introduced advanced CNC laser cutting machines, imported CNC machining centers, CNC bending machines, CNC shearing machines, large-scale automatic spraying lines, large-scale assembly tooling, automatic welding robots and other international leading equipment to fully meet the diverse needs of customers Through strong information technology resources and the introduction of cutting-edge technology and rich practical experience from Singapore, the use of international advanced production and processing technology, to achieve technology transformation and quality improvement of the whole machine, highlighting the perfect and noble style of Kaier Lingdian! Sales....
It is most likely that the file is corrupted, and it is an important mechanism to control the boot process of the operating system. For example, the default value in the [boot loader] section is missing or invalid, the partition path in the file is set incorrectly, and the file should be missing or corrupted. Actually, you can file it yourself, if you can enter the system right-click on my computer --> Properties --> Advanced --> the third item: >>>More