The PSP is flooded and malfunctioning

My little p has been in water and the condition is similar to your own, but I still have a problem is the string of keys, and then I took the battery out of the napkin and wrapped it in a napkin, and then wrapped the host well, put it in a dry place for a week, and then take it out and you can use it I don't know if you have as good luck as me.

If it doesn't work, you have to repair it, and generally the place where you buy the machine can be repaired, 2000, about 300, if you go to the place where you bought the machine, and there is a warranty card (not expired), it can probably be cheaper.

Just take it to the game point and clean it up, it may be damp inside. About 50 pieces. However, it is necessary to check whether the machine is damaged first, so as not to be slaughtered.

Or disassemble the machine by yourself, (twist the screws carefully and gently when dismantling) and dry it with a hair dryer for 1 time.

My PSP fell directly into the water last time, I didn't repair it the next day, I'll teach you: open the disc drive case behind the PSP, take out the memory card, and then shake it hard, try to shake the water out, and then put it on the table for a day, and the next day should be fine, just reset the time and language.

You'd better not turn it on, lest the machine turn into bricks... You don't have to take anything to fix it, it will cost about 100, if you're lucky, your machine will be fine. Clean up the inside and you're done.

When you go to the store where you bought the machine to repair, you should put it in a cool and ventilated place to dry naturally. Leave it for a few more days!!

Where to buy it to get repaired, if it doesn't work, buy a new one!

It had to be repaired because the state of the circuit series was changed.

It's best to go to the store and let the boss send the small p to the manufacturer A few hundred It's not a trivial matter to get into the water.

There may be sequelae, such as a certain key is not controlled, etc.

Looking for js, but maybe it won't be used for too long, and some parts will rust.

You've only been putting it for a day, and it's winter, so it's going to take a few more days!! Let it dry completely.

It's best to repair it in the shop where you bought the machine, so it's easy to cut it.

If you go to the shop you bought to fix it, it shouldn't cost you a lot of money.

Forget it, now JS has more than 500 CPUs, more than 100 flashing machines, and more than 200 screens.

It is estimated that more than 1,000 will be repaired.

It doesn't have to be fixed yet.

Buy a new one.

Why bask in the sun. Blow with a hair dryer.

When you turn it on again,It's destined that your little p is going to js**.。。

Go to the manufacturer to repair, there is some water in the Baideng piece.

Where to buy it to get repaired, if it doesn't work, buy a new one!

Of course, go to JS to fix it.,You're in trouble with this problem.。

Fix it at js! Otherwise, the little p will be short-circuited!

It is recommended that you go to a video game store and do not delay.

Repair those stores in the neighborhood that sell video games Generally not very expensive You may look like seven or eight hundred I recommend you to go to the place where you buy it to repair it You give it to him Explain it to him Then he repairs it You go to get it in a few days and then give the money You can pay attention to it in the future Take care of your little p.

Hello, to the after-sales testing and processing, there is no way for artificial. Don't panic when your electronic devices get into the water. We divide the situation into 3 types: 1

Falling into clean water with power on; II

Falling into non-corrosive liquids in the event of a power failure; III

Falling into non-clean water when the power is on, or falling into corrosive or viscous liquids or other clean liquids regardless of whether the power is applied or not.

The first two cases have a good chance of being saved and there may be no sequelae, while the latter depends on luck. Of course, if you are unlucky, PPC will also be bad if you put it in your pocket.

The biggest problem after PPC water ingress is how to deal with it. First of all, for the 1st and 2nd cases, we must not think that the machine has been scrapped. Don't think it's already in the water anyway, so you disassemble it indiscriminately. Here are some suggestions for each situation:

1. Falling into clean water when the power is on, this situation generally does not need to be disassembled.

1. Power off as soon as possible.

Shake dry vigorously (depending on the situation, if you pick up the phone immediately after falling into the water, you can consider not spinning dry), but don't shake the machine off, the idea is to shake the water out of the screen. If there are water droplets left on the screen, there will be traces after drying.

Place under a slight heat source such as a desk lamp or spotlight to let the moisture slowly dissipate. This process takes more than six hours. Do not use a strong heat source such as a hair dryer in a hurry.

4. If there is something left on the screen and it is very serious, do not deal with it according to the first point and paragraph 3, because although the electronic circuit after this treatment can work normally, the screen may be quite ugly. It can be sent to the nearest maintenance department for processing or dismantling the machine for cleaning by yourself.

LZ, it can't be a foot wash, right? PSP fell into the water.

The first reaction was to immediately pick up the PSP in the water, pull out the battery, pull out the memory stick, take the hair dryer and blow it for 1 hour, and try to turn it on after 2 days.

So I recommend the landlord:

1.If you don't want to repair it, you should wait at least 5 days before turning it on, because the water on the internal circuit board has not completely dried.

2.You can't use a hair dryer every day to blow it, it will hurt PSP.

3.Put the PSP upright and let the water inside stay down. Open the UMD bin of the PSP and place it in a ventilated place.

The warehouse is a good seat for blowing, and when you blow with a hair dryer, you blow from there.

If some symptoms appear at that time, it is inevitable, but it really can't be done, so I have to take it to the video game store where you bought PSP to fix it.

The owner of the tower will solve the problem as soon as possible.

That, is it completely submerged or drenched in water? Was it on or off or standby?