What are the advantages of modular boilers, and what are the advantages of modular furnaces?

Commercial Gas Imported Modular Boiler High Efficiency Silent Burner Gas Boiler Module High Efficiency Stainless Steel Combustion Grate, Forced Combustion, Silent Combustion Without Vibration, Ensure a Quiet Environment, Suitable for Various Installation Sites. The boiler uses 20mbar standard municipal low-pressure natural gas, which eliminates the need to build an independent pressure regulating station, reduces pipeline investment and saves engineering costs.

The commercial gas imported module boiler is safe and reliable, and the water pressure system of the open installation module boiler is not only always in the state of normal pressure during operation, but also has multiple perfect safety protection functions: flameout protection; Anti-dry burning protection; antifreeze protection; Protection from low water level; Automatic exhaust protection; Anti-overheating protection and leakage protection; Closed installation: The closed waterway system is always under pressure during operation, and the system has the following protection functions in addition to the safety protection function of open installation

Pressure-type expansion protection system; Waterway low-pressure protection system, safe pressure relief protection device at high pressure.

1. Simple structure, flexible and convenient.

What is a modular boiler? To put it simply, it is to split the previous single large boiler into several small boiler combinations. Therefore, this combination can easily reach the scale of a single boiler of a whole ton, and is completely able to replace the traditional boiler with less than ten rectifications that are common now.

Since each small boiler is a backup for each other, the utilization rate and safety are inevitably improved, and it has good capacity expansion performance. In addition, the modular boiler does not have high requirements for the construction area and facilities of the pot, which can reduce the investment cost of the plant and thus improve the profit.

Second, the system is complete, safe and reliable.

The modular boiler adopts the "atmospheric direct-firing" combustion method, which is very safe. In the past, if the single boiler was not purged thoroughly, the residual combustible gas would deflagrate, which could lead to serious deflagration. Modular boilers, on the other hand, are similar to gas-fired water heaters used in households, where the gases are well mixed and ignited.

Even if there is a gas leak, the boiler can quickly and reliably discharge the excess gas.

3. Environmental protection and no noise.

The modular boiler does not use the air making equipment in the traditional boiler when burning, and the sound of boiler operation is almost inaudible to the human ear. At the same time, most of the burners of the modular boiler are made of aluminized steel, with excellent technology to ensure efficient combustion, and the combustion rate is more than 98%, which basically does not pollute the environment.

Small size, light weight, convenient transportation and installation.

It belongs to the range of commercial boilers, which are generally atmospheric boilers and have no danger.

The main burner heat exchanger is a modular design, how much power is needed, add different numbers of combustion and heat exchange modules.

Model of the combustion chamber of a disc heat exchanger inside a modular boiler.

4.Low noise and low emissions.

5.High degree of intelligence, no need for stokers.

What are the advantages of modular furnaces? The fuel of the modular furnace is gas, also known as the gas modular furnace, and there are many advantages of the gas modular furnace, which are summarized as follows:

Steam is produced in seconds, no preheating is required, and it is ready to use.

2. In-line tube row design structure, convection heat exchange mode, stainless steel pipe (thick wall) material, high temperature resistance, high pressure resistance, durability, large heating surface, small conversion thermal resistance, good heat absorption, high heat utilization rate.

3. The air rent is premixed with low nitrogen combustion mode, and the flue gas NOx emission concentration (measured) is < 30mg m3, which meets the low nitrogen emission standard.

4. Imported gas valve group is adopted, and the gas pressure and flow rate are automatically adjustable, and the pressure is automatically stabilized, which is not affected by external factors.

5. Saturated steam, high quality, steam temperature up to 180, more suitable for industrial enterprises;

6. Modular combination of combustion chambers, reducing connection ports, integrated design, less failures and low maintenance costs.

7. Low energy consumption, small heat loss, continuous steam supply, high comprehensive energy-saving efficiency;

8. Made of stainless steel, no rust, exquisite and beautiful appearance, fine workmanship, ***;

9. Supporting pure water treatment equipment, automatic monitoring of water quality, so that the steam is more pure and the system does not scale;

10. Small size, simple installation, easy to move, complete functions, wide use and long service life.

Take the Newkman modular furnace as an example:

1. Proportional combustion system. Ensure high performance.

The modular furnace is equipped with an advanced proportional solenoid gas valve and a high-efficiency stainless steel burner, which automatically adjusts the output power and gas pressure according to the actual heat, and monitors the change of air pressure in real time. The secondary gas valve monitors the combustion status in real time to ensure the safe and stable operation of the whole system.

2. Unique design, space-saving.

The modular furnace has a unique design, a heating system consisting of multiple modules, each of which can be "connected", "connected", "space-saving". Detachable design for installation in confined spaces.

3. Multiple protection, safe and reliable.

The modular furnace provides a variety of safety protections for the combustion system, such as flame protection, drying protection, wind pressure protection, automatic exhaust protection, thermal protection and leakage protection. In addition, the Hangyan Zhendao system also has high-pressure, low-pressure protection and safety pressure relief equipment, so that the pressure of the entire waterway is controlled within the range. These two aspects guarantee the safety and reliability of the entire machine.

What is the difference between a modular furnace and a conventional boiler? The differences between modular furnace and traditional boiler are: 1. Modular furnace:

Modular boiler, also known as "modular furnace", is a heating equipment composed of several single heating units with the same function, each single heating unit generally has a combustion system, smoke exhaust system, heat exchange system, etc., its structure and wall-hung furnace are basically the same, a single heating unit is a heating module, so it is called "modular furnace".

2. Traditional boiler: The traditional boiler is a single heating unit, which is a small boiler with greater power. No matter how large the model of boiler needs to be purchased, it is one, and the modular furnace can be divided into several parallel installations, so that in use, it can play a role in mutual backup, and if one fails, the other can also be used.

Answer: 1. The modular furnace belongs to the instantaneous atmospheric water heater, and there is no pressure vessel. 2. The thermal efficiency of the traditional gas boiler is only about 92, while the thermal efficiency of the modular furnace is 98 102.

Traditional boilers, no matter how large the type of boiler needs to be purchased, are one, and modular boilers can be divided into several parallel installations, such as a boiler that needs 2 tons, a traditional boiler is a 2 ton boiler, and a modular boiler can be divided into two 1 ton boilers, or 4 tons of boilers, installed in parallel, so that in use, it can play a role as a backup for each other, if one fails, the other several can also be used.

In addition, at the beginning and end of winter, there is no need for too much heat, as soon as the traditional boiler starts, the whole boiler starts, which will waste some unnecessary fuel, while the module boiler can only start a few boilers with enough heat according to the heat demand, which can save a part of the fuel expenditure.

Vanderly gas module boiler, multiple associated installation, energy-saving and environmentally friendly.

Atmospheric modular boiler is mainly suitable for the needs of water supply and heating of large buildings, residential quarters, factories, schools and other enterprises and institutions, and has the following advantages:

1. Adopt no fan and other running parts to eliminate noise pollution;

2. Adopt unique fin tube heat exchanger, high efficiency and energy saving;

3. The whole water pipe is arranged, the water volume is small, and the production and operation are safer in accordance with national standards;

4. Modular combination, which can be used in combination at will according to different needs;

5. The atmospheric modular boiler is small in size, light in weight, occupies less land, and is convenient for transportation, installation and maintenance;

6. The atmospheric modular boiler has a built-in sacrificial anode, which can effectively prevent scaling;

7. Set up anti-dry burning protection device to ensure the safe and reliable operation of the boiler;

8. Microcomputer control digital display, which can realize timing, temperature control, remote control, fault analysis and other functions The above are the characteristics of atmospheric modular boilers, which are not only environmentally friendly but also highly efficient compared with other boilers. For example, its modular design, simple structure, flexible installation, convenient and long life, and simple maintenance, durable control system, safe and reliable operation of the equipment, clean, environmental protection, low noise and high efficiency, energy saving, low operating costs, etc., and the atmospheric modular boiler has also been widely used in various new construction, renovation heating, hot water projects.

1. Start the sub-station.

Realize "pure trouser start-up", which saves fuel compared to a single large boiler. The modular boiler system achieves efficient operation throughout the year by starting up just enough modules in separate stages.

It is necessary to choose a single heating boiler that is large enough to meet the 100% load conditions that occur only during the coldest season. In the heating season, it takes less than 20% of the time to run at full capacity, and most of the rest of the time is wasted due to overcapacity. The modular boiler realizes the close coordination between the output and the need, and eliminates the energy waste of large single boilers.

2. Thermal efficiency.

The thermal efficiency of the module is 95%-105%, the gas module boiler is semi-open combustion, the gas module boiler does not need to be purged when starting and stopping the furnace, and the mixing ratio of natural gas and air is changed synchronously when the gas module boiler is burned, and there will be no insufficient combustion.

Among them, Vanderley boiler is a relatively energy-saving module boiler in China.

The <> backing module furnace is distributed with open crack installation, and the grouping is accurate for energy supply and heating, saving fuel.