What should I do if the BL 745R 845R router is set up and still can t connect to the Internet?

This is usually caused by a problem with the settings.

Here's how to set up your wireless router:

1. The broadband bus (the network cable from the cat) connects to the WAN port of the router.

2. Connect one end of the network cable to any LAN port of the router, and connect the other end to the computer, and start the computer and router equipment;

3. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface.

4. An account and password to log in to the router appear in the settings interface, enter the default account and password admin

5. According to the setting wizard step by step setting, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

6. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

7. Set the wifi password, try to make the alphanumeric combination more complicated and not easy to be rubbed off the network.

8. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

If you are connected to the router, please check the WAN status of the router, if it is not connected, please reconnect, only if the WAN is connected to the Internet, the computer can access the Internet.

If you are connected to modem, please click Broadband connection to dial the broadband number. If you don't dial up the Internet, of course, you can't access the Internet.

Hello! The steps to set up the BL-745R router are as follows:

1. First connect the power supply, then plug in the network cable, plug the incoming cable into the WAN port, and then plug in a LAN port with the network cable connected to the computer.

3. After connecting, you will see that you will enter the corresponding login user name: admin and password: admin.

4. Enter the operation interface and click the Setup Wizard.

5. Enter the boundary opening base of the setup wizard and select the Internet mode setting.

6. Click Next to enter the Internet access mode settings, and you can see that there are three ways to access the Internet. If it's dialing, then use PPPoE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer.

The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or you want to rent a fixed empty IP.

7. If you choose PPPoE dial-up Internet access, you need to fill in the Internet account and password.

8. Then click Next to enter the wireless settings, you can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in casually, and then the mode mostly uses 11BGNFor wireless security options, choose WPA-PSK WPA2-PSK, which is so safe that you won't let people hack and rub the network. Click Next to set it up successfully.

9. Click Done, the router will automatically restart, and the router setup will be completed.