The laptop cannot be connected after the Mercury MW54R wireless router is set up with a shared key

Wireless routing judgment.

1. Whether the PPPoE is set correctly in the route, and the corresponding public IP address should be displayed if the connection is successful.

2. Whether the wireless card driver of this machine is installed correctly, and whether the hardware manager is displayed.

3. Whether the machine can log in to the wireless router for setting, if so, then it is a wireless router and external network connection problem.

4. Whether the machine has a dynamic intranet IP or a fixed intranet IP (it is recommended to set a fixed intranet IP according to the routing IP segment).

Normal setup only requires the setup wizard to be completed. If you still can't access the Internet after completing the wizard, check the System Tools - System Logs on the routing interface

1. If there is "PAP password verification failed" in the log, please verify the Internet user name and password you entered in the route. The username contains English letters, which should be entered in lowercase.

2. There are multiple times in the log that "send a padi request to establish a connection" and "requese timed out"."The prompt is that the routing WAN port and the front-end incoming line or the modem are not connected, check whether the WAN port indicator is on.

I don't know how your router is set up, record the settings of your router, such as encryption type, password, security type, etc., the router's DHCP and wireless functions are ensured to be on, and you will use it for a while, then open Vista's network and sharing center, click Manage Wi-Fi, add a new network, manually create a network profile, the network name is the SSID of your route, the encryption type should be the same as your routing settings, and then the password should be consistent with your router's, after it is established, Directly right-click on your new network,Point attributes,The security type is set to shared,As for IP、DNS are automatically obtained,After all this is done,In the list of wireless networks searched,Click to connect and try again,See if you can go online,Generally speaking, that's OK,Vista and win7The Internet settings and XP are slightly different,XP is required to enter a password when joining the wireless network,Win7 and Vista are everything to be set up in advance,Direct point connection on it, By the way, Vista is the most garbage system in the history of Microsoft, with high resource occupation, extremely poor compatibility with professional software, and there are many vulnerabilities, it is recommended to replace it to Win7 or XP if possible (HP computer should be used with caution, and the hardware may not be compatible with XP.)

Direct reset, reset set. You've been rubbed into the net. The default password of the router has been changed, and the wireless password has also been changed. I can't figure it out, Q I 331081418

That's how you rebooted? If you press the small button of the router, you have to press it for a while (press it when the power is on, otherwise it will be useless), and then look at the IP and password on your router (such as: or you can enter the account and password of the network card after seeing what it is.

In fact, you can set a password to prevent others from logging into your router.

You don't have to know what's going on 1Maybe you're not the host and the host has filtered your mac or the mac filter function has been turned on2There is also the possibility that someone else has accidentally logged into your router and changed something, 3

Or there is a problem with your computer's own settings, fix the IP to be obtained automatically, or some other reason. Come on, you refresh the router and start it, look at the router's manual, or go online to see how to restart! Oh, and one more thing, you need to turn on the firewall when you surf the Internet, which will prevent P2P terminators from controlling your internet speed!!

Once connected, the browser opens.

Select Security Settings and modify the key.

The specific Mercury MW54R wireless router is as follows:

1. Connect the power supply of the router, and then plug one end of a network cable into the network port of the computer, and the other end into the LAN port of the router.

2. Open the browser of the computer, enter the IP of the router in the address bar, click the enter key to enter the settings page of the router, the user name is admin, the password is blank, click to log in, and enter the settings home page of the router.

3. After logging in to the homepage, select Manual Settings. Then select Manual Internet Settings, and Home Dial-up users select the PPPoE connection type. In the username and user, enter the username and password given by the ISP provider (Netcom, Great Wall, Telecom, Tietong, Cable, etc.) correctly.

The connection mode selection is always filled in with the mtu value of 1492. The save is done.

4. The wireless router also has a wireless encryption to ensure the user's wireless security. Select the wireless settings on the main page of the router's settings, select an encryption method in the security mode, any one of WEP, WPA, or WPA2, and then enter 8 or more Chinese characters or numbers as the wireless password in the security key, and the router settings will be completed after saving the settings.

5. After the setting is completed, the router will automatically restart, and the external network cable can be used by connecting the external network cable to the WAN port of the router.

To encrypt the router, there is a change password in the system tools on the router's web page.

1. Default username and password admin).

2. Wireless Parameters ===" basic settings, check "Turn on security settings", select "wep", "hexadecimal". Then select 64-bit as the key type next to Key 1, and then select Key 1. Then enter your password; [Note:.]

The recommended password to enter is 10 digits]. Save.

3. On your computer, reconnect to the wireless signal and enter the password.

At the same time, it is recommended that you change the default username and password of your router. Method: "Routing management interface, system settings ==" Change login password. 】

Now there are a few rubbing the network.,I suggest you remove the password.,Don't let the network cable see you use the router.,The router is not allowed to be used.,Thank you for adopting.。

To put it simply, once you encrypt it, you don't know how to connect to the wireless network.

Method 1

1. Open the browser --- enter the general router address is this) enter the route--- enter the user name and password, (the default is admin).

Method 2: 1. The address, account number, and password of the router are all on the back of the router.

Method 3, 1, reset the router.

2. The address, account number, and password of the router are all on the back of the router.

Look at the default password on the router label If it doesn't work, there's a reset button on the back.