How to connect the Xiaomi R1D router?

Under. <>

2. Connect the installed putty to port 22 of the router.

3. The successful pop-up window requires root permission.

4. Directly unzip the most important lamp package to the correct position.

5. Open the browser, go back to the web interface of the Xiaomi router, click on the system settings option, and paste it behind the URL on the page.

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

Under. <>

2. Use the installed putty to connect to port 22 of the router.

3. The successful pop-up window requires root permission.

4. Directly unpack the most important buried lamp bag to the correct position.

5. Open the browser, go back to the web interface of the Xiaomi router, click on the system settings option, and paste it behind the URL on the page.

Summary. Hello, the Xiaomi router R1D can realize the function of wireless bridging by setting the wireless bridging function. You can set it up by following these steps:

1.Log in to the management interface of the Mi R1D and enable the WDS function in "Advanced Settings" - "Network Settings" - "WDS Wireless Bridge". 2.

In the WDS wireless bridging interface, select the "Scan" button, search for and select the SSID of the primary router you want to bridge, and enter the password of the primary router. 3.In the WDS wireless bridging interface, set the IP address, subnet mask, and gateway of the Mi router R1D to ensure that it is in the same network segment as the main router.

4.Click "Save" to complete the setup of the wireless bridging function. It should be noted that in wireless bridging mode, the Xiaomi router R1D can no longer be used as the main router, and can only be used as a signal to bridge the main router from the router.

At the same time, the network speed in wireless bridging mode may be affected to some extent, so it is recommended to use the wireless bridging function when the network load is small.

Hello, the Xiaomi router R1D can realize the function of wireless bridging by setting the wireless bridging function. You can set it up by following these steps:1

Log in to the management interface of the Mi R1D and enable the WDS function in "Advanced Settings" - "Network Settings" - "WDS Wireless Bridge". 2.In the WDS wireless bridging interface, select the "Scan" button, search for and select the SSID of the primary virtual pin provider you want to bridge, and enter the password of the primary router.

3.In the WDS wireless bridging interface, set the IP address, subnet mask and gateway of the Mi router R1D to ensure that it is in the same network segment as the main road sail byuser. 4.

Click "Save" to complete the setup of the wireless bridging function. It should be noted that in wireless bridging mode, the Xiaomi router R1D can no longer be used as the main router, and can only be used as a signal to bridge the main router from the router. At the same time, the network speed in wireless bridging mode may be affected to a certain extent, so it is recommended to use the wireless bridging function when the network load is poor and the car is small.

Can't you set it up directly like other routers?

No, you can't.

1. Check whether there is any interference source.

1.Is there a microwave oven in your home near the wireless router?

Nowadays, our living and living conditions are getting better and better, and there are generally electrical appliances such as microwave ovens at home, and if the computer is too close, it will definitely cause interference of wireless signals! Then the solution is very simple, just put the router away from the microwave oven.

2.Is there a wireless router device next door?

Many routers are very penetrating, even if they are separated by two walls, the signal can penetrate and be searched, and this kind of router will also become a strong device that interferes with other routers. In this case, you can only change the channel of your router to another channel.

PS: The channel is in the basic settings of the wireless network.

3.Do you have other wireless devices at home?

For example, cordless**, wireless mouse, wireless keyboard, etc. will have a certain amount of interference on the router, and the severity of the interference is related to the performance of the router and the performance of the wireless keyboard and mouse! Cordless** will produce a strong interference signal when it is turned on**, in this case, you can only use other non-equipment, or buy a wireless router with stronger power.

2. Troubleshoot wireless router settings.

1.Does the wireless router have a speed limit?

When the broadband is set to limit the network after the network is unstable, it will be dropped, and of course the network speed limit will be lifted to see if it is normal.

2.Equipped with security features such as firewalls?

If you have set up installation settings such as firewalls, it is recommended to turn them off to see if the network is working!

3. Being attacked by DoS or ARP.

1.Whether it is internal and external or external network ARP on the router This kind of attack will be the router disconnected, the network is unstable, log in to the router when it is unstable, use the router's ping internal and external network, test to see if it is normal, the situation of timeout is generally attacked, so it is recommended to redial + unplug the wireless of other LAN clients to try.

Fourth, it may be that your network cable interface is loose or other line faults.

If you encounter a loose interface or unsuccessful router dialing, it will cause all the computers in the network to be disconnected, because the router will automatically dial up, so although the wifi can be connected, but it will be able to open the web page for a while, and it will not be opened for a while.

The solution is to log in to the router when it can't be opened, check if the dialing is unsuccessful, and the public IP address is not obtained.