How often should the shower shower be replaced?

In addition to many places in the home that are easy to overlook, such as under the sofa, kitchen drains and trash cans, etc., there is also one place that is more likely to be overlooked, that is, the shower head in the bathroom, especially the shower head that has been used for a long time, if not cleaned or replaced in time, it will pose a threat to health. <>

1. The hazards of the shower head after hiding dirt and dirt.

The shower head is often watered, and it is in a wet state for a long time, and after a long time of use, many scale and other impurities will be deposited inside, which will become the food of bacteria, if not cleaned up in time, it will make the shower head become a breeding ground for germs, and these germs will attach to your body with the flow of water when you take a bath, and will also enter the human body, and people with poor immunity are particularly prone to illness, especially the elderly and children. <>

2. How often should the shower head be replaced or cleaned?

There is no fixed replacement cycle for the shower head, as long as it is not broken, it does not need to be replaced, but it needs to be cleaned regularly, especially when you take a bath in a certain time, you find that the total water output of the shower head has become smaller, or the amount of water in the outlet hole is different, or some holes simply do not come out of the water, and even you see that there are small white and yellow debris stuck in these holes, which means that a lot of scale has accumulated in your shower head and needs to be cleaned immediately. <>

3. How do you clean the shower head?

The main cleaning object is scale and other impurities, most of the shower head is easy to disassemble, so we first disassemble the shower head, clean off most of the scale and impurities, and then focus on the dirt attached to the inner wall that is difficult to remove, you can choose the vinegar bubble method, but this can only be effective for thinner scale, for thicker scale, you can buy scale cleaner to deal with it, and after cleaning, the shower head will be dried or dried, and then reinstalled.

As long as you can clean the shower head regularly, you can basically eliminate the breeding of bacteria, for the sake of health, you should pay more attention to these easily neglected places in your life that are easy to hide dirt and dirt.

In general, it is ideal to replace bath flowers like this once a month or so, but if you don't replace them for a long time, there will be a lot of bacteria on them, which is not good for your health.

Generally, I choose to replace it once a quarter, as long as it is after each bath, properly clean the shower head, it can still be used for a period of time, and the most important thing is to love hygiene.

There is no specific replacement time, you can use your own judgment to replace it when you feel that the water sprayed by the shower head is not delicate.

The shower head should be cleaned at least every six months, and if properly maintained, it can be replaced again every 2-3 years.

Generally speaking, change it every three months. If there are many times, it is recommended to change it once a month and a half.

Prick the hole with a needle, soak it with vinegar, use lubricant.

If some of the small holes are blocked with acupuncture, then release the water first to see which holes are blocked. When I turned on the shower head, I saw that there were a lot of small holes in the shower head. This is where the water comes out.

Prepare a needle first, and then use the needle to puncture the impurities in the hole until there is no impurity in the hole. This method is the most straightforward, but be careful to puncture the shower holes.

Soak it in vinegar if the shower head has been blocked for a long time, and a large number of holes are blocked. Then it is obviously not realistic to pierce one by one with a needle. In this case, the problem of clogged shower showers can be solved by acidifying and dusting.

You need to prepare some white vinegar and pour the vinegar into a basin so that the shower head can submerge. After about 10 minutes of soaking vinegar, you can remove the limescale from the shower head.

with lubricants. If the metal of the shower head is rusted and the blockage is very serious, then use WD-40 anti-rust lubricant. This rust removal lubricant can have very good affinity and permeability with metals. It is possible to separate the rust layer from the metal layer.

Makes the rusty part and the metal contact surface, and leaves a protective film. Let the shower never die. If your shower at home is not made of stainless steel, you may need this method.

The shower head will have scale after a long time, how do you clean it up?

The shower should also be well maintained. The water quality in the country is becoming harder and harder with the deterioration of the environment, and after a period of use, there may be water alkali in various parts such as hand showers, shower heads, shower columns, hoses, etc.

1.Remove limescale.

Every once in a while (3 months or half a year) we have to carry out a comprehensive cleaning of the shower head, remove the shower head and soak it in white vinegar for 3-5 hours (for the scale is too thick, the shower head should be dismantled and soaked in its inside), and then wipe the water outlet of the shower head with a cotton cloth, and rinse off the white vinegar inside after the shower is reinstalled. In addition, it should be noted that strong acid should not be used when removing scale, so as not to corrode the surface of the shower and affect the appearance of the shower.

2.How to maintain the electroplated surface of the shower?

You can use a soft cloth to stick a little flour to wipe the surface of the shower plating, and rinse it with clean water after finishing.