How to adjust the temperature of the shower?

1. How to adjust the water temperature of the constant temperature shower.

It has a knob on the left and right, and the knob on the left is used to adjust the temperature. Hold the left knob in your hand and lower the temperature when you drive forward; Opening backwards is to turn up the temperature, and when it is open to 40 degrees, the knob usually cannot be screwed. Since the water temperature above 40 degrees Celsius is very easy to burn the user, if you want to raise the water temperature above 40 degrees, press the red button on the left knob and press the left knob back.

2. What should I pay attention to when using a thermostatic shower?

1. In the process of using the thermostatic shower, the user should be careful about the temperature adjustment. Although this type of shower has its own temperature control function, it cannot be adjusted casually, and the temperature must be within the standard range. Also, if you have installed such a shower at home, it is recommended to set the temperature of the water heater between 65 degrees and 85 degrees.

2. If a thermostatic shower is installed, the temperature of the water heater should not be adjusted too high, and the temperature of the water should be carefully controlled. Due to this type of shower and its pipes, it cannot withstand overheated water, which can easily cause damage.

3. For those who don't know much about this type of shower, the water temperature on its left side is recommended to be adjusted below 40 degrees, so that the shower and shower tube slowly enter the case of heat dissipation and cooling. It must not be turned off directly or the cold water must be turned on, because this is particularly harmful to the shower.

4. In the process of use, if the water pressure gap between hot and cold water is too large, users can use a screwdriver to adjust the valve of the bracket.

Generally, the shower can adjust the state of the water, that is, the size of the water.

When the temperature is to adjust the temperature with the handle in the middle of the hot and cold water, I adjust the quantity of water by pulling up height (anteroposterior).

The temperature of the shower is usually a handle underneath. That is to say, twisting to the left is usually cold water, twisting to the right is usually hot water, and usually adjusting this position to the middle to the right is enough.

If you can have the temperature, you can have it, but the tears and tears come out together, you can adjust it, if it is suitable, more than 30 degrees, more than 40 degrees.

There is really no need to ask such a question here. Different shower heads have different temperature adjustments. You can read the manual after you buy it. If you don't want to ask, just ask the buyer directly when you buy.

If the temperature of the general bath shower is adjusted, it is good to just adjust the left and right.

1. Generally speaking, there will be a button on each side of the thermostatic shower faucet. Typically, the button on the right controls how and how much water comes out of the thermostatic shower. When the right button scale is aligned, the thermostatic shower is turned off.

2. The button on the left controls the water temperature. If you need to lower the water temperature, you need to hold the button and twist it forward. If you need to turn up the water temperature, you need to hold the button and twist it back.

Generally speaking, when the button on the left is twisted to 40 degrees, it will not be screwed. Because if the water temperature exceeds 40 degrees, it is easy to burn**. So in general, the maximum water temperature of the thermostatic shower will not exceed 40 degrees.

3. If you need to use water temperature above 40 degrees, you can press and hold the red safety button on the left button, and then press and hold the left button at the same time and then screw it backward to the temperature you need.

If you have installed a thermostatic shower, you need to know how to operate it. How do you adjust the water temperature of a thermostatic shower? PChouse will take you to find out.

1. There are buttons on both sides of the faucet of the thermostatic shower, and the button on the right is generally used to control the way and amount of water drained by the thermostatic shower.

2. If you want to increase the amount of water at the outlet under the thermostatic shower head, you should press and hold the button on the right side of the thermostatic shower nozzle and twist it forward. The further you go, the more water you emit. If you want to increase the amount of water produced by the thermostat, you should press and hold the button on the right side of the thermostat and then screw it back.

The more you turn back, the more water you produce.

3. The button on the left side of the thermostatic sprinkler is used to control the water temperature of the thermostatic sprinkler. If you want to lower the water temperature of the thermostatic shower, you should press and hold the button on the left side of the thermostatic shower and twist it forward. If you want to increase the water temperature of the thermostatic showerhead, you should press and hold the button on the left side of the thermostatic shower truck and turn it back.

4. Under normal circumstances, when the button on the left side of the thermostatic sprinkler turns to 40 degrees, the button will not rotate, because if the water temperature exceeds 40 degrees, it will cause burns to people, so the thermostatic sprinkler will generally limit the maximum temperature of the water to within 40 degrees.

[Calculate how much it will cost you to renovate your home].

The thermostatic shower is a kind of shower that can adjust the water temperature, and can directly spray the appropriate warm water, so that the owner can enjoy the shower time more safely and comfortably. However, some people don't know how to adjust the water temperature of the thermostatic shower, so how to adjust the water temperature of the thermostatic shower? Let's learn together.

How to adjust the water temperature of the thermostatic shower.

1. Both sides of the faucet of the thermostatic shower are generally equipped with a button, and the button located on the right is generally used to control the water outlet mode and water output of the thermostatic shower. When the scale on the right button of the thermostatic shower is aligned, it means that the thermostatic shower is turned off.

2. If you want to increase the water output of the water outlet under the thermostatic shower, then you must hold the button on the right side of the thermostatic shower and twist it forward, the further forward, the greater the water output. If you want to increase the water output of the thermostatic shower, then you need to hold the button on the right side of the thermostatic shower and twist it back, the further back, the greater the water output.

3. The button on the left side of the thermostatic shower is used to control the water temperature of the thermostatic shower. If you want to lower the water temperature of the thermostatic shower, then hold the button on the left side of the thermostatic shower and twist it forward. If you want to turn up the water temperature of the thermostatic shower, then hold the button on the left side of the thermostatic shower and twist it backwards.

4. Under normal circumstances, when the button on the left side of the thermostatic shower is screwed to 40 degrees, the button will not be screwed, because if the water temperature exceeds 40 degrees, it will cause scalding to people, so the thermostatic shower will generally limit the maximum temperature of the water to within 40 degrees.

5. If the owner wants to adjust the water temperature of the thermostatic shower to more than 40 degrees, then you should press and hold the red safety button on the left button of the thermostatic shower, and then press and hold the button on the left side of the thermostatic shower and continue to twist it backwards until the temperature that the owner wants.

The above is a detailed introduction to how to adjust the water temperature of the thermostatic shower, and I hope it can help friends in need to solve the problem of adjusting the water temperature of the thermostatic shower. If you want to use a thermostatic shower, then you need to understand the correct operation steps and precautions of the thermostatic shower to avoid problems.

Enter the area and get the decoration for free**].

1. Generally speaking, there will be a button on each side of the thermostatic shower faucet. In general, the button on the right controls the way and how much water is dispensed from the thermostatic shower. When the right button scale is aligned, the thermostatic shower is turned off.

2. The button on the left controls the water temperature. If you need to lower the water temperature, you need to hold the button and twist it forward. If you need to turn up the water temperature, you need to hold the button and twist it back.

Generally speaking, when the button on the left is twisted to 40 degrees, it will not be screwed. Because if the water temperature exceeds 40 degrees, it is easy to burn**. So in general, the maximum water temperature of the thermostatic shower will not exceed 40 degrees.

3. If you need to use a water temperature above 40 degrees, you can press and hold the red safety button on the left button, and then press and hold the left button at the same time and twist it backwards to the temperature you need.

Thermostatic shower advantages.

1. Convenient: After setting the water temperature, there is no need to adjust the heat and cold as often as ordinary showers. It saves time to adjust the water temperature, and it also saves water resources that are wasted by adjusting the water temperature.

2. Comfortable: The temperature of the water is constant, and the bath will not be hot or cold. Generally, the temperature of the thermostatic shower is set at 38-45 rooms, which is the temperature range that people usually feel comfortable when taking a bath.

3. Safety: The temperature of the thermostatic shower is fixed, and the water will not be overheated, which can prevent children and the elderly from being scalded by misoperation when adjusting the temperature. There are also some that can be done with the handle anti-scalding function.

How to maintain the shower shower on a daily basis?

1. The ambient temperature of the shower should not exceed 70 degrees Celsius, high temperature and ultraviolet light will greatly accelerate the aging of the shower and shorten the service life of the shower, so the installation of the shower should be as far away as possible from the heat source of electrical appliances such as bath bombs. Therefore, the shower should not be installed directly under the bath bomb, and the distance should be more than 60cm.

2. The metal hose of the shower head should be kept in a natural stretched state, and it should not be coiled on the faucet when not in use. At the same time, pay attention to the joint between the hose and the faucet to avoid breaking or damaging the hose.

3. Every six months or less, remove the shower and put it in a small basin, water and soak the surface and interior of the shower with edible white vinegar for 4-6 hours, then gently wipe the spout on the surface of the shower with a cotton rag, reload the joint and pass the water for a while, and wait for the white vinegar and scale to flow out with the water to eliminate or reduce the impact of scale on the shower, and can have a certain sterilization effect.

4. Frequently wipe the electroplating surface of the shower with a soft cloth with a little flour, and then rinse it with water to make the surface of the shower as bright as new.

5. Do not often disassemble the shower by yourself, improper dismantling may cause damage to the appearance and internal structure of the product.