-
Glass: 牋. Glass is one of the main materials of the shower room, and the general cleaning cycle is better to clean it once a week. When cleaning, you can use a soft cotton cloth and glass of water to clean. Mul.
-
1. Add vinegar and salt. Mix salt and white vinegar from your home, apply it directly to the limescale area, and wipe it off with a rag. In fact, the accumulation of limescale on the glass door of the bathroom is not due to any special component, but the calcium and magnesium ions dissolved in the hot water, which are insoluble in water, so they will form on the glass of the bathroom.
Vinegar contains acetic acid, which reacts with calcium carbonate and can effectively remove limescale.
2. Plastic wrap to help. First spray a layer of detergent on the area where there is limescale, then spread a layer of plastic wrap on top, the plastic wrap will help the stain soften, wait for 10-15 minutes, remove the plastic wrap, and wipe it vigorously with a rag. When spraying detergent, the hardware should be avoided, otherwise it will cause corrosion to the hardware.
3. Toothpaste. Toothpaste has a certain cleaning power and friction, apply the toothpaste to the limescale and wipe it vigorously with a rag.
4. Waste newspapers. Newspaper is the best item for cleaning glass, and the glass wiped with newspaper is not only clean and bright, but also does not leave water marks. Before wiping, you need to wipe the gray layer on the surface with a damp rag.
5. Floor cleaner. If none of the above methods are effective, you can use a floor cleaner to clean it. It is important to note that gloves should be worn when in use.
-
1. Treatment of glass. The material of the shower room is generally explosion-proof glass, and it is easy to see if the glass is dirty, and there will be obvious water stains of different colors on it. The easiest way to do this is to wipe off the water sticking to the shower with a glass brush every time you use it, so that the glass will be clean immediately and will not sacrifice bacteria due to long-term residue.
But what should be done with glass that has already produced yellow water stains? In this way, the shampoo can be squeezed into a container, then mixed with water, dipped in a rag and wiped, and the glass can be cleaned.
2. Floor treatment. If the floor is not cleaned for a long time, it will produce very slippery dirt and make it easy for family members to slip. Therefore, you can mop the floor with a mop every time you take a shower.
If you haven't cleaned it for a long time, you can mix it with white vinegar and water, and the effect is best when the ratio is 1:1. You can also use 84 disinfectant to wash the mop to detoxify the bathroom and think about the health of the whole family.
3. Treatment of edges and corners. The corners and corners are the best places to hide dirt and dirt, and the dirt that leaks from the floor can be taken out with plastic gloves to ensure the smooth flow of water. If the edges are black, use a toothbrush to dip the toothpaste and brush it out.
You can also use a small watering can, put the white vinegar and water mentioned above in it and soak it first, and when it softens, it will be faster to clean. Faucets in the bathroom are prone to rust and can easily contain dirt, so they should be wiped down frequently and treated with a dry rag.
4. Advantages of shower room. The shower room can isolate a bathing space, so that the bathroom can be divided into dry and wet areas, so that water stains will not splash the whole house, which is conducive to hygiene. The shower room saves space, and the style of the shower room is simple and atmospheric, and it will look very high-grade at home.
Its glass is of good quality, and there is no need to worry about safety. The daily care method is also very simple, and it is suitable for office workers of the current clump split.
Cleaning the shower room is not as difficult as imagined, as long as you learn the correct cleaning method and become a home master, the home will definitely become cleaner and cleaner!
-
1. After the bath is completed, wipe off the fog on the surface of the glass mirror with a soft cloth, dip a small amount of dish soap with a soft cloth, and evenly apply it to the mirror, which can remove spots and have a good anti-fog effect, so that the mirror surface can be bright and transparent for a long time.
2. The surface of the tile also needs to be cleaned, and hard or sharp rags or brushes can not be used, which will scratch the surface of the tile and make it lose its original finish. In order to maintain the gloss and pattern of the tile surface, clean it with a soft cleaning cloth.
3. The most commonly used cleaning of ceramic tiles is the multi-functional foam cleaning agent in the bathroom, spray this foam cleaning agent on the surface of the tile, and then wipe it with a dry cloth, so that it does not hurt the surface of the tile, and it is easy to clean the surface stains of the tile.
4. You can also make your own bathroom cleaning liquid, dilute it with your own edible alkali heating water, and wipe the surface of the tile with a cotton cloth dipped in alkaline water. For tiles in corners and corners, stubborn dirt can be sprayed with dish soap, and gently brushed with a soft-bristled brush to remove it.
5. After the cleaning is completed, brush a waterproof agent on the gap, so that the dirt can be avoided in the gap in the future.
6. The bathroom is a very humid space, washed and washed many times, the water vapor of the space is very large, if you do not pay attention to the moisture discharge of the bathroom, the bathroom will be in the humidity for a long time, the tiles will be easy to loosen and fall off, and the service life of the bathroom will become shorter.
The corners and seams of the bathroom also need to be cleaned regularly, otherwise they will accumulate more and more, which is the step to clean the bathroom.
-
Bathroom cleaning should be done separately.
How do I clean a shower head?
A common problem with shower heads is that the surface and inner surfaces are prone to limescale, which can be easily removed with vinegar.
1. Mix water and vinegar in a ratio of 1:1 and pack them in plastic;
2. Remove the shower head and soak it in a plastic bag and seal it well;
3. Take it out after standing for half an hour, rinse it with hot water, and it will shine immediately!
How do you polish a faucet?
1. Apply shaving cream to the faucet, 2. Then wipe with a damp rag, 3. Rinse it clean, so that after a simple operation, the faucet can be clean when the mirror is used!
How to clean bathroom tiles?
1. Put a 1:1 ratio of drinking water and vinegar or bleaching powder in a spray bottle. Shake it to make it fully integrated;
2. Spray the liquid in the spray bottle onto the tile, of course, you can spray more where there is mold;
3. Note that it is best to let the tiles air dry naturally after spraying;
4. Finally, rinse thoroughly with the tiles when it rains;
5. As for those black spots that are difficult to clean, we have to touch the "upgraded" cleaning method: mix baking soda and water into a paste, and then use an old toothbrush to scrub the black spots vigorously.
How do you clean a toilet?
1. Throw two effervescent tablets into the toilet, foam for 15 minutes, 2. Brush up and down with a toilet brush, press lightly, and rinse with water.
How do I clean my toothbrush holder?
If it's not a toothbrush holder made of wood or metal, then we can use the dishwasher to clean it.
1. Put the toothbrush holder on the top rack of the dishwasher, set it to normal circulation, and we can be the shopkeeper.
2. Cleaning the soap dish also follows the steps mentioned above.
How do you clean a bathroom mirror?
The steps to clean the bathroom mirror are similar to those for cleaning the faucet, still with the help of a "magic weapon" shaving cream.
1. Rub the shaving cream onto the bathroom mirror with a paper towel, 2. Then use a wet paper towel to wipe the bubbles on the entire mirror, 3. Finally, rinse with water. In this way, the bathroom mirror can be bright, fragrant, clean and clear for up to a week. (Don't throw away the shaving cream that you haven't used up in the future, this is the "artifact" of bathroom cleaning).
-
"1. Clean the shower head For the scale on the shower head, it can be easily solved with vinegar. Because the main components of limescale are calcium carbonate and magnesium hydroxide, they can chemically change with the acid in vinegar to achieve the purpose of removal.
Specific operation of descaling: 1. First mix water and vinegar in a ratio of 1:1 and seal them with a container.
2. Remove the shower head and soak it in a sealed container and seal it well. 3. Take it out after about half an hour, and rinse it with hot water. 2. How to polish the faucet and clean the mirror Faucet and the mirror are mainly water traces, if you want them to shine again, you need to use shaving cream, and then apply it to the faucet and wipe it clean.
2. Cleaning toilet cleaning skills: Mix vinegar and water, then pour it into the toilet bowl and soak it for about half a day. After scrubbing the toilet, spray the white vinegar on the toilet bowl for testing, keep it for a few hours and then flush it with water, which can have the effect of disinfection and deodorization.
3. Cleaning bathroom tiles The method of cleaning bathroom tiles is also very simple. Specific methods: 1. Rotate the old housekeeper bathroom cleaner nozzle to the position where the spraying symbol is facing up, 2. Spray the fully shaken liquid to the tiles 3. Wipe the dirt clean with a damp rag 4. Finally, rinse the tiles thoroughly with water. "。
-
In the bathroom, even with a general detergent, it can be cleaned, use a brush to scrub and scrub it, and then ventilate it frequently to keep it dry.
-
How to clean the shower room:
1.If there is dirt on the glass of the shower room, you can remove it by washing it with a mixture of vinegar and a little salt. You can also use toothpaste to spray the bathroom glass or frosted glass, then wipe it with a toothbrush, and then wash the frosted glass with warm water.
2.You can also use the toilet cleaner to clean, and you should also pay attention to keeping it clean, and rinse it with a spray head when you take a bath every day.
3.Spray the glass water evenly on the surface of the glass and wipe it clean with a soft dry cloth.
Note that the tempered glass should not be scratched with a hard object, so as not to endanger the safety of the glass. The glass of the shower room lies in the daily cleaning, and it can be cleaned after each wash to ensure the long-term brightness of the shower room.
4.For water stains in the glass room, you can go to the supermarket to buy a glass scraper suitable for the size of the glass door of your shower room or use a double-sided glass cleaner (as shown below).
5.For the yellow water stains on the glass of the shower room, you need to spray it with a glass cleaner, and then scrub it with a dry cloth to make it as bright as new; The best way to use the hardware accessories used in various parts of the shower room is to wipe them regularly with a dry rag to keep them clean.
-
Teach you how to clean the shower head.
-
It can be washed with a mixture of vinegar and salt, and it will not take long to remove the stain. You can also paint the glass in the bathroom with glassware cleaning liquid, then wipe it with a toothbrush, and clean it with warm or slightly hot water.
If there is a yellow on the glass of the shower room.
If you spray it with a glass cleaner, then wipe the yellow stains with a rag to wipe the yellow stains off the glass immediately. When you take a shower or don't take a shower, you should also keep the shower room.
The inside is cleaned frequently with clean water and kept clean. There are other small accessories in the shower room, basically belong to the hardware category, do not use detergent and water to clean, it is easy to cause the surface of the small accessories to corrode, the surface falls off, etc., it is best to use a dry rag to clean the hardware accessories.
-
With the progress of society and the development of science, with the improvement of living standards, we are not only full of interest and culture in home decoration, but also have a taste of small bathroom culture. So in the bathroom, how to clean the shower glass?
First of all, it is necessary to understand the material of the shower door.
When we generally make it, we design 8mm and 10mm tempered glass as the partition material, and then use aluminum or stainless steel material to complete the function of the whole shower door.
First of all, find a water hose or shower, and spray the glass shower door at will, so that the glass surface is filled with water droplets. If the glass is dry, it is very difficult to clean, and the glass is easy to be scratched by the rag and there are traces.
Then we found the laundry detergent and pointed it against the upper part of the glass, remember that it was the upper part that began to spray, so that the laundry detergent fully adhered to the glass door, and waited for about 3 minutes to allow the enzymes in the laundry detergent to react. At this time, wipe the glass with a rag that has fallen from above.
At this point, you will find a lot of bubbles, so don't worry about continuing to work, wait until the whole glass is wiped and then come to wipe the other side of the glass. Otherwise, one side is clean, and the other side is not clean and ugly.
Finally, rinse and spray with clean water, or a shower from above. Let the laundry detergent and bubbles all rinse off, and the glass that appears at this time is very clean and transparent.
If it is not clean enough, you can add a process at this time, which is to use toilet cleaner or glass cleaner, mix it with tap water, rinse it a little harder, find a small broom, sweep it from top to bottom, and finally rinse it with clean water.
Finally, when you need to dry the glass, you can wipe it with a dry rag, of course, if you have newspapers at home, it is the most beautiful to wipe with newspapers, and there will be no problem of hair removal and filament, because the newspaper has better water absorption, and the fibers of the newspaper are arranged very closely.
1. Consider how to open the door. The door opening method is generally divided into external opening, casement opening (sliding left and right), and internal opening. Generally, when the door is opened, it occupies a large space, and the actual area should be considered to be sufficient. >>>More
Top 10 famous brands for your reference.
1 Deli shower room (shower room top ten brands, shower products large-scale production enterprises, Zhongshan Deli sanitary ware). >>>More
1. Tool removal method.
Glass water, watering can, scouring pad, glass scraping and rubbing with a watering can to replenish glass water at any time. Among them, if the scouring pad can be replaced with a sponge with better water absorption, the effect is better. Because it doesn't take much friction to remove scale, as long as the glass is full, the scale is very easy to dissolve. >>>More
I don't think you should buy Lens, the after-sales of the Lens shower room is very rubbish! I was a property owner in Shanghai, and I bought it because I thought their shower room was very good-looking, even if I thought it was a little expensive, but I still bought it back with a good mood that it was hard to buy. It took less than a month for the shower room to close the door with a creaking sound, I told them that it was a slide rail problem, because there was no sound after taking a wet shower, and then they insisted that I dismantle the shower room, saying that it was a dismantling to solve the problem, not a track problem. >>>More
As far as I know, it is not very good, it is recommended that you buy brand products, a good shower room glass has the characteristics of transparency, moisture resistance, and good processing performance. However, ordinary glass is fragile and unsafe due to poor rigidity. Therefore, when consumers choose a shower room, from the perspective of safety and durability, they must choose products made of rigid glass. >>>More