THE SOONER THE BETTER, THE QUESTION ABOUT GRADIENTS IN PHOTOSHOP

Well, you're talking about the common color mode in Photoshop - RGB, which is a value that you can set yourself.

When you select the gradient tool, you'll find that the menu bar has its tool bar and a dialog box pops up, and then you double-click on the black and white slider, the first one to select the starting color is 199, 178, 154, and the second one is to select the final color to 247, 247, 247, and you're done.

RGB That's the value you need to set yourself.

When you select the gradient tool, you'll find that the menu bar has its tool bar and a dialog box pops up, and then you double-click on the black and white slider, the first one to select the starting color is 199, 178, 154, and the second one is to select the final color to 247, 247, 247, and you're done.

YFMK's is not the same.

In the toolbar, select the Gradient tool and then there is a menu bar on it, with a long bar with different colors on both sides. You put the mouse anti-that in there it will show that it's a gradient, double-click it and it's "in the gradient", and then you can set it up.

1 In the toolbar, select the Gradient tool.

2 Look at the menu bar above, there is a long strip type, and the colors on both sides are different. Double-click on it.

3 What is turned on is "In the Gradient".

4 There is another long strip underneath the vessel. There are two sliders at each end, and you can set them by double-clicking them.

Tools Materials.

Computer to Photoshop software.

Here's how. 1. Hit first.

Open the baips software, create a new file, and enter some text arbitrarily, as shown in the figure below:

2. Then click on the "Layer", "Layer Style", and "Gradient Overlay" options, as shown in the figure below

3. On the gradient overlay, you can see the default parameters, as shown in the following figure:

P.S. gradient tool.

to achieve a gradient effect.

The specific steps are:

1. Select the Gradient tool.

2. Click on the gradient weighting bar in the tool property bar of the gradient change tool, and the gradient 3. In the gradient dialog box, the gradient style above is preset by the system, and the gradient style below can be set by yourself (click on the top of the gradient style, you can add a color, and you can set the color value and position of the color in the color scale properties below; If you click below, you can add transparency to this position, and you can set the opacity and position in the color scale properties below).

4. After completion, you can directly use the gradient tool to make a gradient effect, and the gradient overlay is set in the layer style:

Add a gradient overlay layer style to a layer, and then set the effect you need according to the parameter settings inside.

1. First of all, use the shortcut key p (pen tool) to draw the path Zhi2, press Ctrl+Enter key to convert the path to a selection dao3, create a new layer, and add a gradient on the new layer.

2. Press the G key to select the Gradient Tool (to convert the fill and gradient in the toolbar), and double-click the gradient icon in the toolbar to grade the color.

3. Add a gradient to the selection.

As for the gradient overlay, I don't see what you mean. If you need to overdo it twice, you can use a gradient to achieve the effect. However, if you double-click on the layer, there will be a gradient overlay effect in the property bar.

And then you can use the effect again until you're satisfied.

1. Open the word document that needs to be sorted, if you need to sort the numbers, you must first select the data to be sorted - start - paragraph - sort (a z) - main keyword - ascending descending.

2. Create a sorting keyword, select all the data to be arranged--Start--paragraph--Sort(a z)--Sort text--Options in the lower left corner--Separator settings--List--There are header rows.

3. Sort the date, strokes, pinyin, etc., and after setting the sorting keywords, you need to select the sorting type and ascending and descending order to sort.

4. Sort the data and text in combination, and sort them by the main keywords - the secondary keywords - the third keyword.

The method of loading gradient colors in PS is:

1. Open the software and click "--Preset--Preset Manager";

2. Find "Preset Type - Gradient" and "Load";

3. Find the gradient file (GRD) to be loaded, load it, and you're done.

Lots of ways:

1. Click the [Create Fill Adjustment Layer] button at the bottom of the [Layer Panel], select [Gradient], and then change the color and angle of the colorizer;

2. Click the [Layer Style] button at the bottom of the [Layer Panel] to create a new [Gradient Overlay], and the same is true to change the color bar color and angle.

You can change the effect on the brightness and darkness of an image by filling the transparency of the layer.

1. The background layer is filled with black, and the **layer is placed above the background layer2. Select the **layer, and click the Add Layer Mask icon.

3. Select the Gradient tool and set the gradient from black to transparent (transparency set to 0%) 4. Draw a gradient on the ** mask.

Set the foreground color to light color, set the background color to dark color, use the marquee tool to select the area you want to fade, click the gradient tool, set the foreground color to the background color gradient, pull a horizontal line from left to right, and the gradient will be completed.

Click the gradient tool in the toolbar, select the desired gradient mode, and hold down the left mouse button to pull from left to right.

Gradient tool, set color, transparency. ok

The toolbar points to the gradient, and then clicks on the place where the gradient is on top, and after clicking on it, there is this gradient setting inside.

2.The background color is filled with green.

3.Drag and drop the scenery material from the desktop to the green background area.

4.After pushing and dragging in, you can move the position and adjust the size, and press enter to confirm after adjusting the fit.

5.In the Layers list panel on the right, right-click on the stand-alone footage layer.

6.In the pop-up menu, select "Rasterize Layer".

7.Once you've finished rasterizing a layer, click to select the layer (it's selected by default), and then click "Add Layer Mask" at the bottom to create a mask on top of the footage layer.

8.A mask means that a transparent "cloth" is placed on top of the layer, which is what a good mask looks like for the layer.

9.Then, click on the white box for the mask layer to select the mask.

10.Right-click the Paint Fill tool on the left and select Gradient Tool.

11.At this time, it was found that the original background color of the foreground was changed to black and white, which is the default color for filling the mask, black for the covered part and white for the displayed part.

12.This step is the key one, put the mouse pointer on the ** of the landscape material, the mouse pointer becomes a cross shape, click the left mouse button and do not let go, and then drag the mouse to the left about 1-2 cm, let go. You'll notice that the landscape** creates a gradient effect that combines with the green background.

If you're not satisfied with the results, you can follow the bold steps above to adjust the starting point position and drag distance until you are satisfied. Place the image on a new layer, add a layer mask, and select a white-to-black gradient for the mask. How do you go to gradient?

In this way, create a new one**, white background, and then press G, you see that tool if it is a paint bucket, press shift+g, and then it is the gradient tool, pull it on the paper is a gradient, if you want to ** out of the gradient effect, then you have to add a mask, pull the gradient on the mask, I don't know what kind of gradient you are talking about.

See a long row of toolbars on the left,There's a black and white on one side.,That's the gradient tool.,You click on it.,You'll see a small bar in the upper left corner that is gradient.,Double-click on the small bar.,Then set your own leak or desired color.,After confirming,Use the mouse to pull down from top to bottom on the screen.,The effect is out.。 Try it yourself,There's a half-black, half-white icon in the lower right corner of the PS software,You click on it, and there's a gradient tool inside for you to keep.。

Do you need to override the underlying gradient every time you pull it out? If that's the case, select the Foreground Color to Background Color gradient in the image below, instead of the second ......

The default is inherently overridden.

Unless you have multiple layers doing gradients and have other blending modes or the opacity is not 100%.

Or your gradient itself isn't 100% opaque.

There is no such setup. If you are not satisfied with the gradient of pulling, you have to go back in the history.