The TV and computer are in a meeting at the same time, and the power suddenly goes out

One: the wire is aging and the bearing capacity is too small. Two:

Whether the electrical switch outside your home or the electrical switch in your home is loose or problematic. Three: the voltage is unstable or the contact is not good.

Four: I have 2 TVs and 2 computers at home, you may be an insurance thing, there is a temperature control insurance, and the voltage will be broken if the voltage exceeds the standard. You can change the insurance, or just dismantle the insurance.

Some of the insurance is on the power plug, or household insurance, but the general household insurance is suitable for most household appliances to be turned on at the same time.

This is the reason why the power is too high, the general electric switch will set a certain power to prevent the power from being too high to burn out the electrical appliances, obviously, the power of the computer plus TV has exceeded the rated power, so the power is off. You can set the power of the switch to a high point, and it is no problem to use a computer and a TV for home electricity.

If it's okay during the day, it will be at night, it is obviously caused by low voltage, the current of the display is large at the moment of starting, and when the voltage is low, it will hit the air switch with low voltage and high current, and the air switch trips instantaneously.

As for the problem that it doesn't work during the day and at night, it's because there are more electrical devices at night, overload, find an electrician to take a look, or go directly to the point where you buy insurance to ask him, and call it OK to get a more powerful one!

If the voltage is unstable or the contact is not good, try to get a voltage regulator.

It's not like it's your family's problem, it's the low voltage of the whole line.

Is it not enough voltage?

You check to see if there is a problem with the point socket in your home.

Summary. Hello dear, happy to answer for you.

1. There is a conflict between the IP address of the TV and the computer, which causes the wireless connection of the computer to be squeezed out after the TV is connected to wifi, causing the computer to drop the line. If you want to avoid conflicts, you can bind two different static IP addresses to the TV and the computer.

2. If the computer is disconnected due to router failure, generally reset the router to the factory setting state, and then re-set the parameters to solve the problem;

3. The method of resetting the router is as follows: when the router is powered on, press and hold the reset button on the back of the router until the indicator light of the router flashes all, and release the button to reset successfully; After the reset, log in to the router's settings interface using the computer's browser, and set the network parameters and wireless network parameters.

Hello, I'm glad to answer for you 1, there is a conflict between the IP address of the TV and the computer, which causes the TV to squeeze out the wireless connection of the computer after connecting to wifi, causing the computer to drop, generally re-check the parameter settings of the router, and re-set it correctly according to the first instruction manual of the router; If you want to avoid conflicts, you can bind two different static IP addresses to the TV and the computer. 2. If the router fails and the computer is disconnected, the router is generally reset to the factory setting state, and then re-set the parameters to solve the problem; 3. The method of resetting the router is as follows: when the router is powered on, press and hold the reset button on the back of the router until the indicator light of the router flashes all, and release the button to reset successfully; After the reset, log in to the router's settings interface using the computer's browser, and set the network parameters and wireless network parameters.

There are generally several reasons for the sudden shutdown of the computer:

1. The cause of the virus is the cherry bird.

2. Turn on "Automatic shutdown and restart when the computer encounters a serious error".

3. Serious memory errors cause the system to crash (software problems).

4. Malicious program or shutdown

5. Due to the heat dissipation problem of the machine (the CPU fan is not working properly, the overall temperature of the chassis is too high, etc., the CPU fan can be replaced and the chassis cover can be opened to solve the heat dissipation problem of the machine).

6. It may be that the voltage is not very stable, when the voltage is too high or drops below the minimum working voltage of the host power supply, the host will also protect and shut down.

Phenomenon: During the normal operation of the electric ridge mountain early brain, the system suddenly and automatically shuts down or restarts the system.

Phenomenon analysis: Today's motherboards have a temperature monitoring function for the CPU, once the CPU temperature is too high, exceeding the temperature set in the motherboard BIOS, the motherboard will automatically cut off the power supply to protect the relevant hardware. On the other hand, power management and virus software in the system can also cause this phenomenon to occur.

What to do: If the above sudden shutdown phenomenon keeps happening, first check whether the heat dissipation of the CPU is normal. Turn on the case to see if the fan blades are working properly, and then enter the BIOS option to see the speed of the fan and the working temperature of the CPU.

If you find that it is a fan problem, you will carry out relevant dust removal maintenance on the fan or replace it with a better quality fan. If the hardware is ruled out, enter the system to thoroughly check and kill the virus. When these factors are eliminated, the cause of the failure may be the aging or damage of the power supply, which can be confirmed by replacing the power supply method, and replace it with a new one if the power supply is broken, and it must not be used continuously, and the hardware will be burned.

1. The virtual welding of the switch circuit of the TV causes poor contact, resulting in frequent automatic opening and shutting down;

2. The switching circuit of the TV is unstable due to moisture, resulting in frequent automatic turning on and off;

3. The high-voltage instability of the main board circuit of the TV leads to frequent automatic turning on and off;

Generally, it is a problem caused by the hardware failure of the TV, and it is recommended to contact the after-sales service of the TV for testing and warranty.