What curing agent can be added to screen printing ink, 3M can t stick off 50

Seiko ink does not need a reinforcing agent.

If not, you can consider replacing the ink, the reinforcing agent is not a good way, it is troublesome and wasteful, and the ink of the reinforcing agent is not popular now.

One. JS series one-component self-drying metal screen printing ink, no need for reinforcing agent, no need for baking, surface drying for 5-10 minutes, 12 hours of thorough drying, after natural thorough drying, it can be tested by finger scraping, 3M, 100 grids, stamping and cutting, anti-alcohol more than 200 times, etc., it is a simple to use and cost-effective product.

Two. JL series one-component baking metal screen printing inks do not need reinforcing agents, and need to be baked and dried at 160-180 degrees.

After thorough drying, it can pass the test of Tianna water, washing water, butanone, acetone, gasoline, toluene, cyclositronone, salt spray, acid and alkali resistance, etc., and can be stamped and cut at the same time, no edge, no peeling. It is a high-quality and high-performance metal metal ink.

Samples are available for trial above.

Shenzhen Baiyin ink.

Ink is so simple - environmentally friendly, comprehensive, high quality, low price!

Depending on what product you do, under normal circumstances, the ink adhesion of silk screen printing can reach 5B, and it can't be pasted without reinforcing agent!

Seiko oil has a matching curing agent, what series of oil are you using Seiko.

Hello, no, the paint curing agent can not be used to adjust the screen printing ink. The role of the curing agent is mainly to ensure the speed of paint drying and enhance the hardness of the paint, and the reinforcing agent is just that the paint will dry slowly, and the drying time is relatively long, and the paint surface will be very weak. Construction process:

Treatment of the base layer - sealing primer - frost paper - lubricating powder - base coloring, repair - full batch of color putty - grinding - brush oil color - brush the first varnish - refill putty - color repair - frost paper - brush the second varnish - brush the top coat.

Dear, I am glad to answer for you: screen printing ink curing agent and paint curing agent are the same as the paint hypothetical and stupid, ink is the same: they are all organic mixtures composed of organic solvents, pigments, film-forming media (resins, polymers), additives, etc.

The difference between paint and ink: There is a difference between paint and ink in terms of fineness. Ink is finer than paint.

Paints focus on workability and film-forming aspects. It is mainly used for beautifying appearance, anti-corrosion, flame retardant, anti-wear, etc. Inks are mainly used in printed products.

Summary. Hello, dispersants are generally used for pigment-type inks, and there are two types:

1.The anionic type uses the principle of mutual repulsion of the same charge (negative charge) to make the pigment particles with anionic dispersant repel each other and it is difficult to aggregate into larger particles and precipitate.

2.Non-ionic dispersants, when pigment particles that have been negatively charged dispersants are close and likely to coalesce, non-ionic dispersants stagger the particles from each other, and this function is called steric hindrance. All dispersion systems are designed using the above principles, and the fluidity, rheology, color development, coverage and gloss of well-dispersed inks are greatly improved.

In the process of use or storage, the stability of the ink will also be relatively improved, and the sedimentation delamination phenomenon will be reduced.

Can silk screen white ink be printed without dispersant?

Hello, dispersants are generally used in pigment-type inks, which are divided into two types:1The anionic type uses the principle of mutual repulsion of the same charge (negative charge) to make the pigment particles with anionic dispersant repel each other and it is difficult to aggregate into larger particles and precipitate.

2.Non-ionic dispersants, when pigment particles that have been negatively charged dispersants are close and likely to coalesce, non-ionic dispersants stagger the particles from each other, and this function is called steric hindrance. All dispersion systems are designed using the above principles, and the fluidity, rheology, color development, coverage, and gloss of well-dispersed inks are greatly improved.

In the process of making the mask quickly used or in the process of storage, the stability of the ink will also be relatively improved, and the sedimentation delamination phenomenon will be reduced.

Soluble in ink and organic solvent will not use any impurities or crystals, no precipitation, does not affect the drying of oil and ink dispersants, wetting agents, desiccant, stabilizers, etc. At present, many manufacturers are using this brightener, and the dosage is generally very small to achieve a good whitening and brightening effect. Hope it helps.