What is the difference between computer standby and shutdown

Standby just hibernates the computer, the power is not off, so the computer is still lucky, but the shutdown is gone.

Shutdown means that all hardware is not powered on, the screen is not powered when standby, memory data is temporarily imported into the hard disk, and the hard disk is powered Features: Standby fee, fast start, shutdown and power saving, slow start.

The computer standby is a power-saving state, but some hardware devices are still running, shutdown is in addition to the computer's own battery power supply to let the time continue to run, other devices have all stopped running, in addition to the computer standby, press the mouse and keyboard will wake up.

1. "Standby" power management mode Standby mode is mainly used to save power, and this function allows you to return to working state without restarting the computer. Standby mode shuts down monitors, hard drives, fans, and other devices to keep the entire system in a low-energy state. When you reuse your computer, it quickly exits standby mode, and your desktop, including open documents and programs, returns exactly to the state it was in when it was waiting.

To get rid of the wait and get back to using your computer, move your mouse or press any key on your keyboard, or press the power button on your computer with a quick click. Please note! Unlike the "hibernation mode" described below, standby mode does not store unsaved information on the hard disk, which is only stored in the computer's memory.

This information will be lost if there is a sudden power outage during the period. Therefore, you should save the file before putting your computer into standby mode. If you want to automatically save your work when you're away from your computer, you can use hibernation mode instead of standby mode.

However, sleep mode will shut down the computer. 2.Hibernate Power Management Mode When you use hibernate mode, you can turn off your computer and be confident that when you come back, all your work, including programs and documents that you haven't had time to save or close, will be completely and accurately restored to the state you left off.

The contents of the memory are saved on disk, and the monitor and hard disk are turned off, which also saves power and reduces the wear and tear of the computer. In general, it takes longer to get a computer out of sleep than it does for it to wait, but it consumes less power. If you are constantly interrupted at work, such as some secretarial professions that often have to answer questions while doing computer processing**, etc., you can consider setting your computer to go into automatic sleep mode after a specified number of minutes.

Sleep mode saves everything in memory to the hard drive, turns off the monitor and hard drive, and then shuts down the computer.

If you don't consider power consumption, standby is a good choice.

1. Because when the computer is switched on, a large amount of impulse current will be generated, which may damage the computer components and reduce the service life. Therefore, standby start-up is less harmful to the computer.

2. It is very convenient to keep the computer in standby mode, we can skip the long boot process and use it right out of the box, avoiding the problem of waiting too long for rebooting.

3. If you need to use the sharing function of the computer, then there is no benefit to shutting down, if the computer is installed with remote control software such as plex, you can complete the task remotely in the state of booting.

The difference between standby and shutdown is that standby shuts down monitors and devices such as hard disks and fans, leaving the entire system in a state of low energy consumption, but not shutting down, and when you reuse the computer, it quickly exits standby mode and the desktop (including open documents and programs) returns exactly to the state it was in when it entered the wait.

Whereas, shutting down is a complete shutdown of the computer system.

Use again to load the system to reboot.

Standby means that the machine is in an open state, waiting for someone to operate and use it at any time, and shutting down means turning off the power, the machine stops working, and needs to be turned back on when in use.

Hope it helps.

Standby means that the phone is still open and can receive calls**, but it belongs to the state of black screen. It's more power-saving, but turning it off is ** can't pick up anything.

The only difference between standby and shutdown is that. Shutdown is to shut down all programs. Standby, on the other hand, is to save some information about these programs on the hard disk, and when you press the computer again, it will.

Standby state refers to the state in which electronic devices such as mobile phones or computers are turned on without any substantive work.

Shutdown is to turn off the power, ** information will not be received.

The difference between standby and shutdown is that standby turns off monitors, hard drives, fans, and other devices, and the whole system is in a state of low energy consumption, but it is not shut down, and when you reuse the computer, it will quickly exit standby mode, and the desktop (including open documents and programs) will return exactly to the state it was in when it entered the wait.

Shutdown, on the other hand, is to completely shut down the computer system and restart the system to load it again.