How about doing jaw angle modification and how to improve the success rate of mandibular angle augme

Common facial contouring procedures include mandibular angle surgery, cheekbone surgery, chin surgery, and facial filling, etc., which are described in detail below!

Mandibular angle surgery - suitable for women with square face shape, square face shape is mostly caused by genetics, so it can only be completely changed through cosmetic surgery, mandibular angle plastic surgery by removing the mandibular angle, which is what we often call the protruding part of the cheekbone, restoring the normal mandibular angle shape, changing the face shape of the square face, so that the beauty seeker can realize the beauty dream of melon seed face or goose egg face.

Cheekbone plastic surgery - the protruding cheekbones not only affect the appearance, in our country there are also high cheekbones of women Kefu said, so many cheekbones protruding beauty seekers have the idea of plastic surgery, cheekbone plastic surgery is to reduce the hypertrophic cheekbones through surgery, or lower to beautify the facial lines!

Chin Augmentation - Many patients have a short chin and crooked chin, which can be corrected by facial contouring, which is surgery to correct various chin defects that affect the facial contour, such as short, crooked and overly prominent chin.

Facial Depression Filling - Face shape defects such as temple depression, cheek depression, and short chin can be solved by facial depression filler, which is a simple surgical method that fills the sunken face shape with hyaluronic acid, collagen and other injection materials like an injection to solve various face shape defects.

Its medial side is the pterygoid tuberosity with pterygoid muscles attached. The mandibular angle and chin bone on the left and right sides and the cheekbones on both sides constitute the basic contour of the face, and form the basic characteristics of facial morphology with tissues and organs such as the nasolabia in the middle of the face, which is one of the important anatomical landmarks of facial features.

Mandibular angle modification can also be done without surgery, Haomeng Chiropractic Training freehand mandibular angle rotation adjustment, customer satisfaction.

1. Infusion before mandibular angle surgery to replenish the nutrients and water needed for a day; Intravenous preparation was performed, general anesthesia was administered, and surgery was prepared.

2. Fully disinfect the oral cavity, and inject local anesthesia and constricted vasocratic YAO from the submucosa of the oral cavity.

3. Make an incision of about 2 cm from the outside of the lower teeth to separate the bone from the soft tissue above.

4. Cut off the protruding mandibular angle and remove the bone.

5. Suture the wound after disinfection.

6. Bandage for about 1 week.

Recovery: The swelling is reduced by 80% in a few weeks after mandibular angle surgery, and you can go to work normally, and the swelling can be slowly reduced until you fully recover after a period of time.

Do a good job of preoperative physical examination and selection, and choose the right expert doctor who specializes in mandibular angle surgery.

Participate in more training to learn mandibular angle plastic surgery, and master rich medical theoretical knowledge and practical experience.

Mandibular angle to change melon seed face, the best method - mandibular angle plastic surgery. The finch shoots know.

The Surgical Hospital of the Medical College of Weifang has the following characteristics for mandibular angle plastic surgery:

1. Mandibular angle plastic surgery is done through the oral approach, and there is no body surface scar after surgery.

2. There are many cases of mandibular angle plastic surgery and a lot of experience.

3. Mandibular angle surgery time is short, generally only about 60 minutes from the beginning of the operation to the completion of the operation, the postoperative edema is light, and the recovery is fast.

4. Mandibular angle surgery adopts different osteotomy surgery methods for different face shapes and mandibular angle types, 5. Mandibular angle plastic osteotomy is accurate to ensure that the face shape is obvious.

6. Combined osteotomy of mandibular angle and mandibular margin can be performed, which has a special improvement effect on the large face, long face shape and large square face caused by the large mandible, so that the face shape becomes smaller and more delicate.

7. Intraoral osteotomy can be combined with hypertrophic masseter muscle removal and buccal fat removal at the same time, so that the effect of reducing the face shape is more obvious.

8. Jaw deviation or asymmetry can also be corrected by this surgery.

9. The pre-mandibular angle surgery examination and diagnosis are highly targeted, and the mandibular angle osteotomy surgery plan corresponding to the characteristics of different patients is formulated.

10. There is a complete administration and nursing system after mandibular angle surgery.

There are four main aspects of the mandibular angle surgery process.

1. Anesthesia: It is done under local anesthesia or general anesthesia, and both anesthesia can complete the operation from the perspective of the surgical effect itself, but when the operation is performed, the person seeking Yu Liangmei under local anesthesia can feel the vibration of the instrument, which may cause psychological uneasiness. So doctors recommend the use of general anesthesia.

2. Surgery: Incision is made in the inner side of the oral cavity close to the angle of the jaw, and the surgical operation is carried out, the incision is in the oral cavity, and the instruments and nerves are separated by a layer of muscles during the operation, which can increase the safety of the operation, and the scar can not be seen after the operation, killing two birds with one stone, and the whole operation time is about 30 minutes.

3. Hemostasis, suture and drainage: stop bleeding when the muscle is separated from the periosteum, apply bone wax to the wound of the bone after the bone is removed, press and release the drainage tube at the same time as suturing the wound to remove the congestion, and the drainage tube can be removed the next day after surgery.

4. Compression bandaging: Through facial bandaging, it can not only play a certain role in hemostasis, but also help shape the face.

Is mandibular angle plastic surgery dangerous? For this kind of surgery, there are concerns about the safety of the surgery. Generally, the problem of large facial contours is that they appear in the position of their jaw angle, if the bones in this position are relatively large, it will cause our facial contour to be square, for many beauty-loving women, this facial contour is really a trouble, so now there are many mandibular angle plastic surgery.

In the past, there was no way to do anything about how to remove the angle of the jaw due to our own technical limitations, but now that our technology has developed, the whole normal beauty industry has a new lease of life, and now we can use the method of facial plastic surgery to help us remove the angle of the jaw. Are there any potential dangers during the surgery of mandibular angle surgery? For any kind of surgery, we can't say that we can achieve complete safety guarantees, so people who undergo surgery before this kind of surgery need to have a detailed physical examination, such as some people with heart disease or high blood pressure are not suitable for this kind of **, and secondly, it is also very necessary to check their own skin, if the incision of surgery is carried out when their skin is inflamed, it will directly affect the recovery of their incision and even lead to more serious problems.

After the preparations, we only need to make a relatively small incision for this surgery.

Mandibular angle surgery is difficult and requires high requirements for doctors, equipment, and pre- and post-operative care. Because the operation is difficult, the risk is relatively high, and it is easy to fail the operation if you are not careful. There are many reasons why mandibular angle surgery fails, such as obvious asymmetry on both sides, failure to achieve face slimming by simple angle cutting, or damage to important nerves after surgery, or postoperative infection.

Depending on the failure of the surgery, the repair method used varies. Therefore, if the patient encounters a failed mandibular angle surgery, he or she should go to the hospital for follow-up in time and take the correct repair method according to the doctor's advice**.

The success rate of mandibular angle repair surgery depends on the hospital you choose. For contour revision surgery, it is very difficult, and if you want to get a good postoperative result, you still need to choose a more professional hospital.

The difficulty of lower frontal angle surgery is relatively large, and there are great requirements for doctors and equipment, as well as pre- and post-operative care, because the difficulty of the operation is greater, so the risk is higher, and it is easy to lead to the failure of the operation if you are not careful.

Mandibular angle repair surgery also needs to be repaired according to the cause of failure, so as to achieve the desired effect, and the mandibular angle needs to be repaired mainly because of the failure of the operation or sequelae, which is generally divided into the following four situations:

1. Postoperative secondary angle: This is a typical postoperative extra angle, the main reason is that the doctor's skills are not up to standard, as long as the postoperative re-take film to determine the scope of the second osteotomy of the mandibular angle, the mandibular angle can be amputated again.

2. Local depression: mostly due to excessive local removal during surgery, less removal of the corner area, or uneven removal of the mandibular outer plate, excessive removal of the local outer plate or cancellous bone, if the local removal of the inner and outer plates is too much, the osteotomy can be extended forward and backward along the position of the depression, and for the excessive removal of the local outer plate, surgery can be done on the outer plate, or it can be improved by autologous fat filling.

3. Asymmetry: the asymmetry of the soft tissues themselves, or the amount of bone removed during the operation is not the same, if the former can be improved by botulinum toxin, the latter needs to be osteotomy on the oversized side.

4. Excessive removal: If there is too much bone removal during the operation, it may cause the curvature of the jaw angle to disappear, shorten the length ratio of the overall face, and lose the sense of coordination.

If it is fat accumulation, liposuction is recommended.

If the masseter muscle is large, it is recommended that the masseter muscle can be reduced by botulinum toxin.

If the bone is wide, it is recommended that the bone can be grinded.

What is the best way to have repair surgery? If we want to do plastic surgery, we must go to a regular plastic surgery hospital.

In the case of mandibular angle revision surgery, it depends on the designer to set it for you, according to your face shape.

Management methods after failed mandibular angle surgery include:

1. Asymmetry on both sides of the mandibular angle after surgery: it may cause temporary nerve damage, and the patient will have numbness of the lips or asymmetry on both sides of the lips.

2. Postoperative depression of mandibular angle surgery: Implant fat in the depression site, and if the depression is serious, artificial bone needs to be implanted to repair it.

The method of jaw angle plastic surgery: bone grinding surgery, this surgery does not require the removal of any bone, but only uses professional grinding tools to thin the outer layer of the mandibular angle bone, thereby reducing the width, and the thickness that can be worn off is relatively limited, at most only 5 to 6 mm.

Advantages: It has the advantages of simple technology, mild damage and faster recovery.

Disadvantages: The improvement effect of the jaw angle is limited, and it is only suitable for face shapes that are not very sharp or only need to be finely adjusted.

Square face shape.

The square face shape is a short face, the face shape is not wide but the lines are strong, the bone is strong, and the chin is short and the tip is slightly raised.

Jaw angle surgery is a mandibular angle splitting surgery, which removes the outer layer of bone from the jaw angle without cutting off the entire mandibular angle.

The face of people with this face shape is not too wide, and the chin is often more prominent, and by removing part of the jaw angle, the width is reduced while the original facial arc is retained.

Angular square face shape.

The square face shape is a typical Chinese face, with a wide face shape and strong lines, and the jaw angle even protrudes backwards, giving people the impression that the masticatory muscles are particularly developed.

The method of mandibular angle surgery is as follows: the surgical method of mandibular angle excision to correct the mandibular angle, the mandibular angle is removed in its entirety, and it is noted that the curvature of the incision must match the chin, and this mandibular angle surgery is characterized by the obvious amplitude of the mandibular angle change.

The mandibular arc can be reshaped, and the masticatory muscles will slowly atrophy when they lose the support of the skeleton, and the problem of masticatory muscle hypertrophy can be solved at the same time.

Shengjiaxin uses a long curve mandibular angle, which is safe and effective. Mandibology can create a beautiful curve on the front as well as a beautiful curvature on the side. Mandibular surgery is performed according to facial aesthetics, which is less risky and conforms to the principle of mandible force.

Generally speaking, bone shaving refers to people with hypertrophy of the mandible, because the angle is too small and the face is wide, some people will choose to cover it with a hairstyle, and some people will choose to make changes by surgery.

Whether it is bone shaving or bone grinding, you need to determine according to the bone piece, we take the bone film, the doctor will tell you how to change this place The amount of bone removed by bone shaving is more, generally used for obvious hypertrophy, and the amount of bone grinding and removal is less.

In addition to bone fragments, we also need to use some professional instruments to measure the proportion and angle of the face. It's not that you can just look at it, and it's not that you can cut it as much as you want, but the jaw angle of a thousand people is still quite scary.

Choose a qualified formal medical aesthetic hospital; Understand the doctor's personal expertise; The main thing is that it is necessary to visit the actual hospital; Wait a minute.