-
Anonymous users2024-02-12Spray range hood cleaner.
-
Anonymous users2024-02-11It can be sanded and polished, and if there are stains, it should be cleaned with clean water first, and then cleaned with a little detergent.
-
Anonymous users2024-02-10Of course, you can, you have to choose according to the specific situation of the floor tile, if there are stains, you can use a towel to scrub them, you can use a professional scrub agent.
-
Anonymous users2024-02-09If the floor tiles are worn, they can be polished and polished, which can deal with these problems well; If there are stains on the floor tiles, you can spray them with some cleaning agent, and then leave them for 2 to 3 seconds and then wipe them with a clean cloth to clean the stains.
-
Anonymous users2024-02-08Polished tile is a kind of tile that most people will choose when decorating, because the effect of his decoration is very good, so it is loved by many people. What to do if polished tiles penetrate stains? If the tiles penetrate into the house, it is difficult to clean, so we have to find a more professional way to do it.
Polished tile is a kind of tile that most people will choose when decorating, because the effect of his decoration is very good, so it is loved by many people. What to do if polished tiles penetrate stains? If the tiles penetrate into the house, it is difficult to clean, so we have to find a more professional way to do it.
To avoid harming the tiles, we also need to understand how to clean the house on the polished tiles.
What to do with the stains that penetrate the polished bricks
There is no good way to remove the stains that penetrate the polished brick, so the stains must be dealt with in time, otherwise the polished tiles can only be replaced.
The surface of the polished tile is polished, and it is generally difficult to remove the stain if it penetrates into the tile, so it is necessary to remove the stain in time to avoid the stain from penetrating into the tile. Vitrified bricks will be exposed after grinding, oil, dust, etc. are easy to penetrate, and the vitrified bricks that have not been treated with antifouling treatment should be waxed in use, and in order to avoid damage to the brick surface during construction before paving, the brick surface should be covered with woven bags and other items that are not easy to decolorize. Antique bricks and wall tiles can be removed with a few small tricks if stains penetrate.
How to clean stains from polished tiles
1. Tea stains, fruit stains, coffee sauce vinegar, leather shoe prints and other stains use sodium hypochlorite diluent (bleach), soak for 20-30 years and wipe off some stains that have penetrated into the brick for a long time, and the soaking time is several.
2. Use sodium hypochlorite dilution (bleach) to deform the mold spots deformed by ink and antifouling wax mold. When using, just apply bleach to the stain, soak it a few times, and wipe it off.
3. Use hydrochloric acid or phosphoric acid solution for cement, scale, rust and rust spots, and wipe it several times.
4. Use alkaline detergent or organic solvent (acetone, triethylene) for paint, oil, oily marker, and surface antifouling wax layer, and paint and degreasing agent.
5. How to use the rubber hammer mark for decontamination: first soak it in 20-40 sodium hydroxide (NaOH) solution for 24 and wipe it with a cloth, and then soak it in 30-50 hydrochloric acid (HCl) solution for 30 and wipe it with a cloth.
6. Ice cream alkaline cleaner.
7. Lime scale acid cleaner.
What about the stains that penetrate the polished tiles? There is no good solution to this problem. The most direct way, the most labor-saving way, is to replace the polished bricks.
As for how to clean the stains on the polished tiles, there are more cleaning methods for this one, we give different cleaning methods for different stains, there are a total of seven aspects above, you can take a good look.
-
Anonymous users2024-02-07<>1. Stains such as tea stains, fruit stains, coffee, sauce vinegar, leather shoe prints, etc., sodium hypochlorite diluent (bleach) can be used, and then soaked for 20-30 minutes and then wiped with a cloth; Some stains that have been infiltrated into the brick for a long time to roll the number, and it takes several hours to soak the acre for teasing.
2. Mildew spots formed by mildew of Xunmai ink and antifouling wax, use sodium hypochlorite dilution (bleach). To use, simply apply bleach to the stain and soak it for a few minutes to wipe it off.
3. Use hydrochloric acid or phosphoric acid solution for cement, scale, rust and rust spots, and wipe it several times.
4. Use alkaline detergent or organic solvent (and 5 ketones, triethylene) to remove paint and degreasing agent for paint, oil, oily marker, and surface antifouling wax layer.
5. How to use the rubber hammer mark for decontamination: first soak it in 20%-40% sodium hydroxide solution for 24 hours and wipe it with a cloth, and then soak it in 30%-50% hydrochloric acid solution for 30 minutes and wipe it with a cloth.
6. If the stain caused by ice cream is used, it can be cleaned with alkaline detergent.
7. If lime stains are accidentally caused during decoration, you can use acid detergent to clean them.
Sub-surface polished brick is a kind of bright brick made by polishing the surface of the whole brick body, which is a kind of whole brick. Compared with full-body bricks, the surface of polished tiles is much smoother. Polished tiles are hard and wear-resistant, and are suitable for use in most indoor spaces except toilets and kitchens, such as balconies, exterior wall decorations, etc. >>>More
Look at the demand, polished tiles are not glazed, surface polishing, glaze is glazed, if you choose a large factory, it is almost the same, see what you like, you can choose what you like, I bought Jincheng before, it feels pretty good.
For people who don't know much about tiles, it is difficult to recognize which tile is good and which is not, so you still have some tips when choosing tiles, first of all, you can look at it from many aspects. Distinguish the color of the back of the tile: the back color of the glazed tile made of clay is red, the back of the porcelain glazed tile is gray-white, and the back of the vitrified tile should be milky white, the color of the back and front of the whole brick is consistent, and the texture of the whole brick can be seen from the side. >>>More
1. Advantage 1: No radioactive elements: natural stone is a mineral and has not been sintered at high temperature, so it contains individual trace radioactive elements. >>>More
In the process of use, polished tiles may be prone to surface staining due to improper use, and several common staining treatment methods are as follows. >>>More